1. Introduction
This manual provides essential information for the installation, operation, and maintenance of your DELTA FAUCET CO 16953-SS-DST Stainless Steel Single Handle Pull-Out Kitchen Faucet. Please read these instructions carefully before beginning installation or use to ensure proper function and longevity of your product.
The DELTA 16953-SS-DST faucet is designed to enhance your kitchen experience with its durable construction and user-friendly features, including InnoFlex PEX waterways and DIAMOND Seal Technology.
2. Product Overview
The DELTA 16953-SS-DST is a single-handle pull-out kitchen faucet featuring a stainless steel finish. Key components and technologies include:
- InnoFlex PEX Waterways: Designed to keep water contained within the faucet, preventing contact with metal contaminants.
- DIAMOND Seal Technology: Utilizes a valve embedded with tiny diamonds for enhanced durability, leak prevention, and reliable operation.
- Touch-Clean Spray Holes: Soft, rubber nubbins on the spray face allow for easy removal of calcium, lime, and hard water buildup with a simple touch.
- Pull-Out Spout: Swivels 120 degrees for extended reach and cleaning convenience.
- ADA Compliant: Satisfies standards set by the Americans with Disabilities Act.
Image 1: DELTA 16953-SS-DST Stainless Steel Pull-Out Kitchen Faucet. This image shows the complete faucet assembly in a stainless steel finish, highlighting its sleek design and pull-out spray head.
3. Setup and Installation
Proper installation is crucial for the optimal performance of your faucet. This faucet is designed for a 3 or 4-hole, 8 to 16-inch installation.
Important: For detailed, step-by-step installation instructions, please refer to the official Installation Manual PDF provided by DELTA. This document contains critical diagrams and safety information specific to your model.
You can access the official installation manual here: DELTA 16953-SS-DST Installation Manual (PDF).
General Installation Notes:
- Ensure all necessary tools and components (including the optional 10-1/2 inch escutcheon) are present before starting.
- Turn off the water supply to the sink before removing the old faucet or installing the new one.
- Follow local plumbing codes and regulations.
- The faucet includes a 22-inch hose length for the pull-out sprayer.
4. Operating Instructions
Your DELTA 16953-SS-DST faucet is designed for intuitive use.
- Water Flow and Temperature: The single handle controls both water flow volume and temperature. Move the handle up to increase flow and down to decrease. Move it left for hot water and right for cold water.
- Pull-Out Spout: Gently pull the spray head from the main faucet body. The hose extends smoothly, allowing you to direct water where needed.
- Spray Function: The spray head features buttons to switch between a steady stream and a spray pattern. The selected spray pattern will remain active even after turning the faucet off and on again, until manually changed.
- Retracting the Spout: After use, guide the spray head back into the faucet body. It should seat securely.
5. Maintenance
Regular cleaning and maintenance will help preserve the appearance and functionality of your DELTA faucet.
- Cleaning the Finish: Clean the stainless steel finish with a soft, damp cloth. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish.
- Cleaning Spray Holes (Touch-Clean): The rubber nubbins on the spray face are designed for easy cleaning. Simply wipe them with your finger or a soft cloth to remove mineral buildup (calcium, lime, hard water).
- General Care: Periodically check connections for leaks and tighten if necessary. Do not overtighten.
6. Troubleshooting
If you encounter issues with your faucet, consider the following common solutions:
- Low Water Flow: Check if the aerator is clogged with debris. Unscrew the aerator and clean it. Also, ensure water supply valves are fully open.
- Leaks: Verify all connections are tight. If leaks persist from the handle or spout, it may indicate an issue with internal components. Refer to the installation manual or contact customer support.
- Difficulty Switching Spray Modes: Ensure the spray head buttons are not obstructed by mineral buildup. Clean the spray holes as described in the Maintenance section.
- Faucet Continues to Drip: This could indicate an issue with the valve. DIAMOND Seal Technology is designed for leak prevention, but if dripping occurs, consult the installation manual or contact DELTA customer service.
For more complex issues, it is recommended to consult a qualified plumber or contact DELTA customer support.
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | 16953-SS-DST |
| Manufacturer | DELTA FAUCET CO |
| Finish | Stainless Steel |
| Material | Stainless Steel |
| Installation Method | Deck Mount (mini_spread, single_hole_deck_mount, Single Hole) |
| Number of Holes Required | 3 or 4 (8 to 16-inch installation) |
| Number of Handles | 1 |
| Hose Length | 22 Inches |
| Item Weight | 4.18 pounds |
| Product Dimensions | 23.25 x 9.88 x 3.15 inches |
| Special Features | Pull-Out Sprayer, Touch-Clean Spray Holes, DIAMOND Seal Technology, InnoFlex PEX Waterways |
| Included Components | Grant Stainless Steel Single Handle Pull-Out Kitchen Faucet, Escutcheon |
8. Warranty Information
This DELTA faucet is backed by a Lifetime Limited Warranty. This warranty covers defects in materials and manufacturing for the original consumer purchaser. For full details regarding warranty coverage, terms, and conditions, please refer to the official DELTA warranty documentation or contact DELTA customer service.
9. Customer Support
For technical assistance, replacement parts, or warranty claims, please contact DELTA customer service. You can typically find contact information on the DELTA Faucet website or within the product packaging.
When contacting support, please have your model number (16953-SS-DST) and date of purchase readily available.
