SABRENT HB-UMLS
Contents
SABRENT 4-Port USB 2.0 Data Hub (HB-UMLS) Instruction Manual
Brand: SABRENT | Model: HB-UMLS
Introduction
The SABRENT 4-Port USB 2.0 Data Hub is designed to expand the USB connectivity of your computer or other compatible devices. It allows you to connect up to four USB 2.0 peripherals simultaneously, providing individual power control for each port. This compact and lightweight hub is an ideal solution for users with a limited number of available USB ports.
Key Features
- 4 USB 2.0 Ports: Instantly adds four USB 2.0 ports to any compatible device.
- Individual Power Switches: Each port features an individual on/off switch with an LED indicator for easy control.
- High-Speed Data Transfer: Supports transfer speeds of up to 480Mbps (USB 2.0), 12Mbps (USB 1.1), and 1.5Mbps (low-speed).
- Wide Compatibility: Compatible with PC, MacBook, iMac, Mac mini, XPS, Flash Drives, and other USB compatible devices.
- Plug & Play: No driver installation required; simply plug it in and start using it.
- Hot Swappable: Devices can be connected and disconnected without restarting your computer.
- Compact Design: Lightweight and portable, making it travel-ready.
Setup Guide
Basic Connection
The Sabrent 4-Port USB 2.0 Data Hub is designed for simple plug-and-play operation. No additional drivers are required for most operating systems.
- Locate an available USB-A port on your computer or host device.
- Connect the USB-A cable from the Sabrent Data Hub into the available USB-A port on your computer.
- The hub is now ready for use.


Operating Instructions
Connecting Devices
Once the hub is connected to your computer, you can begin connecting your USB devices.
- Plug your USB device (e.g., flash drive, keyboard, mouse, scanner) into any of the four available USB 2.0 ports on the hub.
- Press the individual power switch located above the corresponding USB port to turn it on. A blue LED indicator will light up when the port is active.
- To disconnect a device, simply press its individual power switch to turn it off, then safely remove the device.


Compatibility
The hub is designed for broad compatibility with various operating systems and USB devices.

Maintenance
The Sabrent 4-Port USB 2.0 Data Hub requires minimal maintenance to ensure its longevity and optimal performance.
- Keep the device clean and free from dust by wiping it with a soft, dry cloth.
- Avoid exposing the hub to extreme temperatures, direct sunlight, or high humidity.
- Do not attempt to disassemble or modify the device, as this will void the warranty and may cause damage.
Troubleshooting
Device Not Recognized
- Ensure the USB hub is securely connected to your computer's USB port.
- Verify that the individual power switch for the connected device is turned on (indicated by the blue LED).
- Try connecting the device directly to your computer's USB port to confirm it is functioning correctly.
- For stable connection, devices connected to the hub must not exceed a combined current of 5 volts 500mAh. External hard drives should be connected to an external power source.
Slow Data Transfer
- Ensure your connected devices are compatible with USB 2.0 speeds. Older USB 1.1 devices will operate at slower speeds.
- Avoid connecting high-power consumption devices that might exceed the hub's power capabilities.
Specifications
| Attribute | Value |
|---|---|
| Product Dimensions | 3.5 x 1.5 x 0.5 inches |
| Item Weight | 2 ounces |
| ASIN | B00BWF5U0M |
| Item model number | HB-UMLS |
| Manufacturer | SABRENT |
| Country of Origin | China |
| Brand | SABRENT |
| Color | Black |
| Hardware Interface | USB |
| Compatible Devices | USB compatible devices |
Warranty and Support
For detailed warranty information, technical support, and frequently asked questions, please refer to the official user manual or visit the manufacturer's website.
- Official User Manual (PDF): Download Here
- SABRENT Brand Store: Visit Store
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.