1. Product Overview
The Duravit 228310 DuraStyle Floor-Standing Bidet is a modern and functional bathroom fixture designed for personal hygiene. This bidet features a sleek white ceramic finish, a single tap hole, and an integrated overflow. Its floor-standing design ensures stable installation and a contemporary aesthetic in any bathroom setting.
Figure 1: Duravit DuraStyle Floor-Standing Bidet, showcasing its elegant white ceramic design and integrated faucet area.
2. Key Features
- 1 Tap Hole: Designed for a single-hole bidet faucet (faucet not included).
- With Overflow: Prevents accidental spills by directing excess water into the drain.
- With Tap Platform: Provides a stable surface for faucet installation.
- Hardware Included: Essential mounting hardware is provided for installation.
- Floor Standing: Robust and stable installation directly on the bathroom floor.
- DuraStyle Design: Modern and minimalist aesthetic to complement contemporary bathrooms.
- White Ceramic Finish: Durable, easy-to-clean, and maintains its glossy appearance.
3. Setup and Installation
Installation of the Duravit DuraStyle Bidet requires plumbing knowledge and should ideally be performed by a qualified professional to ensure proper function and compliance with local building codes. Ensure all necessary water supply lines and drainage connections are available at the installation site.
3.1 Pre-Installation Checklist
- Verify all components are present: Bidet unit, mounting hardware.
- Ensure water supply lines (hot and cold, if applicable) and drain pipe are correctly positioned.
- Confirm floor is level and capable of supporting the bidet's weight (approximately 60.2 lbs / 27.3 kg).
3.2 Dimensional Drawings
Refer to the following diagrams for precise measurements and rough-in dimensions required for installation.
Figure 2: Side view dimensions, indicating height and depth requirements.
Figure 3: Top view dimensions, showing width and faucet hole placement.
Figure 4: Front view dimensions, detailing overall width and base measurements.
3.3 Installation Steps (Summary)
- Position the bidet according to the dimensional drawings and mark drilling points for mounting.
- Drill holes and insert appropriate anchors.
- Connect the drain assembly to the bidet's waste outlet.
- Install the bidet faucet onto the tap platform and connect water supply lines (hot and cold).
- Secure the bidet to the floor using the provided mounting hardware.
- Apply a silicone sealant around the base of the bidet for a watertight seal and finished appearance.
- Test for leaks and proper water flow.
4. Operating Instructions
The Duravit DuraStyle Bidet is designed for straightforward operation, providing a hygienic and comfortable experience. Operation is primarily controlled by the bidet faucet (sold separately).
4.1 Basic Use
- Position yourself comfortably on the bidet.
- Turn on the bidet faucet to initiate water flow. Adjust the water temperature and pressure using the faucet's controls to your preference.
- Once cleansing is complete, turn off the faucet.
4.2 Water Temperature and Pressure
Most bidet faucets allow for adjustment of both water temperature (if connected to hot and cold water supplies) and water pressure. Start with a low pressure setting and gradually increase it to a comfortable level. Always test the water temperature before use to avoid discomfort.
5. Maintenance and Care
Proper care and regular cleaning will ensure the longevity and pristine appearance of your Duravit DuraStyle Bidet.
5.1 Cleaning the Ceramic Surface
- Use a soft cloth or sponge with mild, non-abrasive cleaning agents.
- Avoid harsh chemicals, abrasive powders, or scouring pads, as these can damage the ceramic glaze.
- Rinse thoroughly with clean water after cleaning and dry with a soft cloth to prevent water spots.
5.2 Faucet and Drain Maintenance
- Regularly clean the bidet faucet and drain stopper according to their respective manufacturer's instructions.
- Check for mineral buildup around the faucet aerator and clean as needed to maintain optimal water flow.
6. Troubleshooting
This section addresses common issues you might encounter with your bidet. For complex problems, consult a professional plumber.
| Problem | Possible Cause | Solution |
|---|---|---|
| No water flow or low pressure | Water supply valves closed; clogged aerator; low household water pressure. | Ensure supply valves are fully open. Clean faucet aerator. Check household water pressure. |
| Leaks around connections | Loose connections; damaged seals or washers. | Tighten connections. Inspect and replace worn seals or washers. |
| Slow drainage | Partial clog in drain pipe or stopper mechanism. | Remove and clean the drain stopper. Use a drain cleaner suitable for plumbing. |
7. Specifications
| Attribute | Detail |
|---|---|
| Manufacturer | Duravit |
| Part Number | 2283100000 |
| Item Model Number | 228310 |
| Item Weight | 60.2 pounds (approx. 27.3 kg) |
| Product Dimensions | 7 x 4 x 8 inches (packaging dimensions, refer to diagrams for bidet dimensions) |
| Size | Medium |
| Color | White |
| Style | American |
| Finish | White |
| Material | Ceramic |
| Shape | As seen on Picture (refer to product images) |
| Installation Method | Floorstanding |
| Number Of Holes | 1 (for faucet) |
| Usage | Inside |
| Included Components | Bidet unit, Hardware (faucet and drain assembly not included) |
| Date First Available | May 18, 2013 |
8. Warranty and Support
8.1 Warranty Information
The Duravit DuraStyle Bidet comes with a Limited Lifetime Warranty. This warranty covers manufacturing defects under normal use and service. Please retain your proof of purchase for warranty claims. For full details regarding terms, conditions, and exclusions, refer to the official Duravit warranty documentation or contact Duravit customer service.
8.2 Customer Support
For technical assistance, installation queries, or warranty service, please contact Duravit customer support. You can typically find contact information on the official Duravit website or through your product retailer.
- Online Support: Visit the official Duravit website for FAQs, product registration, and support resources.
- Phone Support: Refer to your product packaging or the Duravit website for regional contact numbers.
