BRAVO! MIO Universal Remote Control User Manual

1. Introduction

The BRAVO! MIO Universal Remote Control is designed for simplified operation of your television. It is particularly suitable for users who require essential functions and large, easy-to-read buttons. This remote can control TVs with built-in digital decoders and aims to replace the primary functions of your original TV remote.

This manual provides detailed instructions on how to set up, operate, and maintain your BRAVO! MIO remote control, along with troubleshooting tips and product specifications.

2. Key Features

• Simplified Design: Ideal for users who need only essential functions, featuring large, clearly labeled buttons.
• Universal Compatibility: Designed to control various television brands, including those with integrated digital terrestrial tuners.
• Automatic Programming: Offers simple and practical setup through an automatic programming process.
• Original Remote Replacement: Capable of replacing the main functions of your television's original remote control.
• Ergonomic Aesthetics: Features an ergonomic design for comfortable handling and clear button labeling for ease of use.

3. Setup Guide

3.1. Battery Installation

The BRAVO! MIO remote control requires batteries (not included). Please follow these steps to install them:

1. Locate the battery compartment cover on the back of the remote control.
2. Slide the cover downwards or press the latch to open it.
3. Insert the required batteries (typically AAA, refer to the compartment for polarity markings) ensuring correct polarity (+ and -).
4. Close the battery compartment cover securely.

3.2. Automatic Programming

The BRAVO! MIO remote control features an automatic programming function to quickly set it up with your TV. Ensure your TV is turned on before starting this process.

1. Point the BRAVO! MIO remote control towards your television.
2. Press and hold the "TV" button (or a dedicated "Setup" button if present, otherwise use "TV") on the remote until the indicator light (usually red) remains lit. This indicates the remote is in programming mode.
3. While the light is still lit, repeatedly press the "Power" button (or "CH+" button) on the remote, pausing briefly between each press. Observe your TV screen.
4. As soon as your TV turns off (or changes channel), immediately release the "Power" button. The indicator light should turn off, indicating successful programming.
5. Test the remote's basic functions (Power, Volume, Channel) to ensure it controls your TV correctly. If not, repeat the automatic programming process.

Note: For some TV models, you might need to try this process a few times or refer to the manufacturer's website for specific code lists if automatic programming is unsuccessful.

4. Operating Instructions

The BRAVO! MIO remote control is designed for intuitive use with large, clearly marked buttons. Below is a guide to its main functions:

Image 1: Front view of the BRAVO! MIO Universal Remote Control, showing its simplified button layout.

• Power Button (⑂): Located at the bottom center. Press to turn your TV on or off.
• OK Button: Central button in the navigation cluster. Confirms selections in menus.
• Navigation Buttons (Up, Down, Left, Right): Surrounding the OK button. Used to navigate through menus and options.
• PROG +/- (Channel Up/Down): Buttons labeled "PROG +" and "PROG -" (or similar, typically above the volume buttons). Used to change TV channels sequentially.
• VOL +/- (Volume Up/Down): Buttons labeled "VOL +" and "VOL -" (or similar, typically next to the channel buttons). Used to adjust the television's volume.
• Mute Button (🔇): Located near the power button. Press to mute or unmute the TV's audio.
• INFO Button: Displays information about the current program or input.
• LIST Button: Accesses a list of channels or recorded programs.
• EXIT Button: Exits from menus or on-screen displays.
• TV/AV Button: Switches between different input sources (e.g., TV, HDMI 1, AV).
• EPG Button: Accesses the Electronic Program Guide (if supported by your TV and broadcast).
• DISP Button: Displays on-screen information, such as current channel number or time.
• F.MV Button: Functionality may vary, but typically used for fast forward/rewind in media playback or quick menu navigation.

Note: The exact functionality of some buttons may depend on your specific television model and its compatibility with the universal remote's programming.

5. Maintenance

• Cleaning: Use a soft, dry cloth to clean the remote control. Do not use abrasive cleaners or solvents.
• Battery Replacement: Replace batteries when the remote's response becomes sluggish or the indicator light does not illuminate during button presses. Always replace all batteries at the same time with new ones of the same type.
• Storage: Store the remote in a cool, dry place away from direct sunlight and extreme temperatures.
• Avoid Drops: Protect the remote from physical shocks and drops, as this can damage internal components.

6. Troubleshooting

7. Specifications

• Brand: Bravo
• Manufacturer: BRAVO
• Model: 90702361
• Item Model Number: 90702361
• Compatible Devices: Television
• Additional Features: Universal
• Batteries Included: No
• Connector Type: Infrared
• Item Weight: 1 Kilogram (approx. 2.2 lbs)
• Product Dimensions: 19 x 13 x 2 cm (approx. 7.5 x 5.1 x 0.8 inches)
• Connectivity Technology: Infrared
• Controller Type: Button Control
• Maximum Number of Supported Devices: 9999 (This likely refers to the internal code database capacity, not simultaneous control)
• Global Trade Identification Number (GTIN): 08031220023618

8. Warranty and Support

Specific warranty information for the BRAVO! MIO Universal Remote Control is not provided in this manual. For details regarding warranty coverage, technical support, or to inquire about specific compatibility issues, please refer to the official Bravo manufacturer's website or contact their customer service directly.

Always retain your proof of purchase for warranty claims.