Honeywell Safes & Door Locks - Model 6108 User Manual

1. Introduction

This manual provides essential information for the safe and effective use of your Honeywell Model 6108 Hideable Small Safe Box. Please read these instructions carefully before operating the product and retain them for future reference.

The Honeywell 6108 is designed to secure cash, electronics, important documents, and other small valuables. It features a programmable digital lock with backup keys, sturdy double steel wall construction, and fire-resistant insulation. Its compact size and carry handle make it suitable for home, small office, or travel use.

2. Product Features

• Personalized Access: Program your unique entry code with the digital keypad. Includes 2 backup keys for emergency access.
• Robust Steel Protection: Built with double steel walls for reliable security against unauthorized access.
• Secure Storage: Dependable storage for documents, jewelry, and other precious items.
• Anti-Theft Design: Concealed hinge helps prevent tampering.
• Scratch-Free Interior: Foam-padded floor mat protects contents from scratches.
• Fire-Resistant Insulation: Offers light protection from fire, heat, and smoke damage.
• Durable Finish: Scratch-resistant powder coat finish.
• Portable Design: Equipped with a carry handle for easy transport.

Figure 2.1: Digital Keypad and Privacy Keylock with Backup Keys.

Figure 2.2: Double Steel Wall Security for enhanced protection.

Figure 2.3: Padded Foam Insert to protect valuables.

3. Setup

1. Unpacking: Carefully remove the safe box from its packaging. Ensure all components, including the safe, two backup keys, and this user manual, are present.
2. Battery Installation: The digital lock requires batteries (not included). Locate the battery compartment, typically on the inside of the door or keypad unit. Insert the required batteries, ensuring correct polarity.
3. Initial Code Setting:
   • With the safe door open, locate the reset button (usually a small button near the battery compartment or on the inside of the door).
   • Press the reset button. The indicator light on the keypad should illuminate.
   • Enter your desired personal access code (typically 3-8 digits) on the digital keypad.
   • Confirm the code by pressing the '#' or 'ENTER' button. The indicator light should flash green, confirming the new code is set.
   • Test the new code with the door open to ensure it functions correctly before closing the safe.
4. Key Lock Usage: The safe also features a traditional key lock. Insert one of the provided backup keys into the keyhole and turn to lock or unlock the safe. Keep backup keys in a secure location away from the safe.

Figure 3.1: Honeywell 6108 Safe Box, ready for setup.

4. Operating Instructions

1. Opening the Safe with Digital Code:
   • Enter your programmed personal access code on the digital keypad.
   • Press the '#' or 'ENTER' button.
   • The safe should unlock, allowing you to open the lid.
2. Opening the Safe with Backup Key:
   • Insert one of the provided backup keys into the keyhole on the lock.
   • Turn the key clockwise to unlock the safe.
   • Open the lid.
3. Closing and Locking the Safe:
   • Ensure the lid is properly aligned with the base.
   • Press down firmly on the lid until it clicks into place. The digital lock will automatically engage.
   • For added security, you may also turn the key in the keyhole counter-clockwise to engage the manual lock.
4. Changing the Digital Code: Follow the "Initial Code Setting" steps in Section 3.3.

5. Maintenance

• Cleaning: Wipe the exterior of the safe with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the scratch-resistant powder coat finish.
• Battery Replacement: If the digital keypad lights dim or the safe fails to open with the code, replace the batteries immediately. Always use new batteries of the specified type.
• Interior Care: The foam-padded floor mat can be removed and cleaned if necessary. Ensure it is dry before placing it back inside the safe.
• Key Care: Keep backup keys clean and dry. Do not force keys into the lock.

6. Troubleshooting

This section addresses common issues you might encounter with your Honeywell 6108 safe box.

If you experience issues not covered here, please refer to the Warranty & Support section for contact information.

7. Specifications

Figure 7.1: Product Dimensions.

8. Warranty & Support

For warranty information about this product, please contact the manufacturer, LH Licensed Products, Inc.

Honeywell Safes, Door Locks, Paper Shredders & Cash Boxes are manufactured and distributed exclusively by LH Licensed Products, Inc. They are committed to providing innovative solutions and quality products.

For further assistance or inquiries, please refer to the official Honeywell Safes & Door Locks website or contact their customer support.

Note: Always refer to the official manufacturer's documentation for the most up-to-date warranty and support information.