SCUBAPRO R195 Diving Octopus Instruction Manual

Introduction

The SCUBAPRO R195 Diving Octopus is designed as a reliable alternate air source for scuba divers. This second stage regulator features a high-visibility yellow cover and a super-flow hose, enhancing safety and ease of use in emergency situations. Its robust technopolymer casing and large diaphragm ensure sensitive and consistent breathing performance. Intuitive controls, including a functional purge button and a VIVA switch, allow for simple operation and free-flow control. The 39-inch super-flow hose provides ample air delivery. This manual provides essential information for the safe and effective use, maintenance, and care of your R195 Diving Octopus.

Image: Front view of the SCUBAPRO R195 Diving Octopus, showing its yellow cover and hose connection.

Safety Information

Important: Diving with compressed air carries inherent risks. Proper training and certification from a recognized diving agency are essential before using this equipment. Always follow safe diving practices and consult with a certified diving instructor or technician for any questions regarding equipment use or maintenance.

• Regularly inspect your R195 Octopus for any signs of wear, damage, or contamination before each dive.
• Ensure all connections are secure and properly sealed.
• Never attempt to service the regulator beyond the scope described in this manual. Refer to an authorized SCUBAPRO service technician for all repairs and internal maintenance.
• Familiarize yourself with the purge button and VIVA switch operation before diving.
• Always perform a pre-dive safety check with your buddy.

Package Contents

Upon opening the package, verify that all components are present and undamaged:

• SCUBAPRO R195 Diving Octopus
• 39-inch Super-Flow Hose
• Orthodontic Mouthpiece
• OCTOPUS holder (grey, part number 01.097.136)
• Instruction Manual (part number 45.101.180)

Setup

1. Hose Connection: Connect the 39-inch super-flow hose to the low-pressure port of your first stage regulator. Ensure the connection is finger-tight and secure. The R195 features a reversible hose attachment, allowing for flexible routing on deco tanks or for personal preference.
2. Mouthpiece Attachment: Ensure the orthodontic mouthpiece is securely attached to the second stage housing.
3. Placement: Position the R195 Octopus so it is easily accessible and visible, typically secured in the chest area using the included OCTOPUS holder. The high-visibility yellow cover aids in quick identification.
4. Functionality Check: Before diving, pressurize your system and test the R195 Octopus.
   • Inhale gently to ensure air flows freely.
   • Press the purge button to confirm it clears water and delivers a steady stream of air.
   • Test the VIVA (Venturi Initiated Vacuum Assist) switch. In the "MIN" or "PRE-DIVE" position, the regulator should be less prone to free-flow at the surface. In the "MAX" or "DIVE" position, it provides maximum airflow during breathing.

Image: Close-up view of the R195 Octopus, highlighting the hose connection point.

Operating Instructions

The R195 Octopus serves as an alternate air source for emergency situations or for sharing air with a buddy.

• Normal Breathing: While not in use, keep the R195 secured. In an emergency, retrieve the octopus, clear it of water (either by exhaling into it or pressing the purge button), and begin breathing normally.
• Purge Button: The large, functional purge button is located on the front cover. Pressing it releases a burst of air to clear water from the regulator or to test air delivery.
• VIVA Switch: The VIVA (Venturi Initiated Vacuum Assist) switch helps prevent free-flow at the surface and optimizes breathing performance underwater.
  • Pre-Dive/Surface Position (MIN): Set the VIVA switch to the "MIN" position before entering the water or when at the surface to minimize the chance of free-flow.
  • Dive Position (MAX): Once submerged and actively breathing from the octopus, switch to the "MAX" position for optimal airflow and reduced breathing effort.
• Air Sharing: When sharing air with a buddy, present the R195 Octopus to them. Its high visibility and long hose facilitate easy access and use.

Maintenance

Proper maintenance ensures the longevity and reliable performance of your R195 Octopus.

1. Rinsing: After each dive, thoroughly rinse the R195 Octopus with fresh, clean water while still pressurized to prevent water from entering the internal components. Once rinsed, disconnect it from the first stage and allow it to soak in fresh water for 15-30 minutes.
2. Drying: After soaking, shake off excess water and allow the regulator to air dry completely in a cool, shaded area, away from direct sunlight. Do not use compressed air to dry the inside of the second stage.
3. Inspection: Regularly inspect the mouthpiece, hose, and housing for any signs of cracks, tears, or deterioration. Replace damaged components immediately.
4. Storage: Store your R195 Octopus in a clean, dry place, protected from extreme temperatures, chemicals, and direct sunlight. Avoid kinking the hose during storage.
5. Professional Servicing: SCUBAPRO recommends annual inspection and servicing by an authorized SCUBAPRO technician to ensure optimal performance and safety.

Troubleshooting

This section addresses common issues you might encounter with your R195 Octopus.

If you encounter any issues not listed here, or if the suggested solutions do not resolve the problem, discontinue use and contact an authorized SCUBAPRO service center.

Specifications

Warranty

The SCUBAPRO R195 Diving Octopus comes with a limited warranty. For specific terms and conditions, please refer to the warranty documentation included with your product or visit the official SCUBAPRO website. Keep your proof of purchase for warranty claims.

Support

For technical assistance, spare parts, or service, please contact your authorized SCUBAPRO dealer or visit the official SCUBAPRO website for contact information and service center locations. Always ensure that any servicing or repairs are performed by certified SCUBAPRO technicians using genuine SCUBAPRO parts.

You can find more information and support at the official SCUBAPRO website: www.scubapro.com