1. Safety Instructions
Always read and understand all safety warnings and instructions before operating this pneumatic tool. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.
- Personal Protective Equipment: Always wear safety glasses with side shields, hearing protection, and appropriate hand protection when operating the tool.
- Work Area Safety: Keep the work area clean and well-lit. Do not operate in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Keep children and bystanders away.
- Air Supply: Ensure the air compressor is properly maintained and set to the correct operating pressure. Never exceed the maximum recommended air pressure for the tool. Disconnect the air supply before making adjustments, clearing jams, or servicing the tool.
- Tool Handling: Never point the tool at yourself or others. Keep fingers away from the trigger when not fastening. Carry the tool by the handle, not by the air hose.
- Fastener Loading: Load fasteners only when the tool is disconnected from the air supply. Ensure the correct type and size of fasteners are used.
- Maintenance: Regularly inspect the tool for damage or wear. Do not use a damaged tool. Perform maintenance as described in this manual.
2. Product Overview
The Holzmann Combi T5040 is a versatile pneumatic tool designed for both nailing and stapling applications. It features a robust and compact design for efficient fastening of various materials.
An image showing the Holzmann Combi T5040 pneumatic nailer/stapler from a side angle, highlighting its compact design, red top housing, black grip, and magazine. This tool is designed for both nailing and stapling tasks.
Key Components:
- Air Inlet: Connection point for the air hose from the compressor.
- Trigger: Activates the fastening mechanism.
- Magazine: Holds nails or staples. Features a viewing window to monitor fastener levels.
- Nose/Driver Guide: Area where fasteners exit the tool.
- Handle: Ergonomically designed for grip and control.
3. Technical Specifications
| Specification | Value |
|---|---|
| Model Number | HM-T5040 |
| Manufacturer | Holzmann |
| Nail Length Range | 20 - 50 mm |
| Staple Length Range | 8 - 40 mm |
| Staple Width | 5.8 mm |
| Magazine Capacity | 100 pieces |
| Weight | 1.2 kg |
| Packaging Dimensions (L x W x H) | 280 x 85 x 290 mm |
| Compatible Compressor | Standard air compressor |
4. Setup
4.1 Connecting to Air Supply
- Ensure your air compressor is turned off and the air tank is drained.
- Attach a suitable air hose (not included) to the air inlet of the Holzmann Combi T5040. Ensure a secure connection to prevent air leaks.
- Set the air compressor's regulator to the recommended operating pressure for the tool (refer to tool markings or general pneumatic tool guidelines, typically 60-100 PSI). Do not exceed the maximum pressure.
- Turn on the air compressor and allow it to build pressure.
4.2 Loading Fasteners (Nails or Staples)
Important: Always disconnect the tool from the air supply before loading fasteners.
- Ensure the tool is disconnected from the air supply.
- Locate the magazine release latch (if applicable) or slide the magazine open.
- Insert a strip of nails or staples into the magazine, ensuring they are oriented correctly with the points facing forward.
- Push the fasteners fully into the magazine until they are seated against the spring mechanism.
- Close the magazine securely. Verify that the fasteners are visible through the viewing window and are feeding correctly.
5. Operating Instructions
5.1 Before Operation
- Reconnect the tool to the air supply.
- Perform a test fire on a scrap piece of material to ensure proper operation and fastener depth.
- Always wear appropriate personal protective equipment.
5.2 Fastening Procedure
- Hold the tool firmly with both hands, if possible, ensuring a stable grip.
- Place the nose of the tool squarely against the workpiece where the fastener is to be driven.
- Apply firm, consistent pressure to the tool against the workpiece.
- Squeeze the trigger to drive the fastener. The tool will fire a nail or staple.
- Release the trigger and lift the tool from the workpiece.
- Repeat the process for subsequent fasteners.
Note: The tool is designed for quick and effortless fastening of materials such as skirting boards, profiled planks, and panels.
6. Maintenance
Regular maintenance ensures the longevity and safe operation of your Holzmann Combi T5040.
- Daily: Disconnect the air supply. Wipe down the tool with a clean, dry cloth to remove dust and debris. Check for any loose screws or damaged parts.
- Lubrication: Apply a few drops of pneumatic tool oil into the air inlet before each use or at the start of each workday. This lubricates internal components.
- Air Filter: If your air compressor has an inline air filter, ensure it is clean and functioning correctly to prevent contaminants from entering the tool.
- Magazine Cleaning: Periodically clean the magazine to remove any accumulated dust or small debris that could interfere with fastener feeding.
- Storage: When not in use, disconnect the tool from the air supply and store it in a clean, dry place, preferably in its original plastic case with a carrying handle.
7. Troubleshooting
This section addresses common issues you might encounter with your pneumatic nailer/stapler.
| Problem | Possible Cause | Solution |
|---|---|---|
| Tool does not fire | No air supply; Low air pressure; Empty magazine; Fastener jam; Trigger mechanism issue | Check air hose connection; Increase compressor pressure; Reload fasteners; Clear jam (disconnect air first); Contact service |
| Fasteners not fully driven | Low air pressure; Incorrect fastener length for material; Tool not pressed firmly against workpiece | Increase compressor pressure; Use appropriate fastener length; Apply more pressure to tool |
| Fasteners jam frequently | Damaged fasteners; Incorrect fastener size; Dirty magazine; Worn driver blade | Use new, correct fasteners; Clean magazine; Inspect and replace driver blade if worn |
| Air leaks from tool | Loose fittings; Damaged O-rings or seals | Tighten fittings; Inspect and replace O-rings/seals as needed |
If you encounter issues not listed here or if solutions do not resolve the problem, please contact Holzmann customer support.
8. Warranty and Support
For information regarding warranty coverage, spare parts, or technical support for your Holzmann Combi T5040, please refer to the warranty card included with your purchase or visit the official Holzmann website. Keep your purchase receipt as proof of purchase for any warranty claims.
For direct assistance, you may contact Holzmann customer service through their official channels.
