Santevia 5-Stage Alkaline Replacement Filter for Gravity Water System

Introduction

This manual provides essential information for the proper installation, operation, and maintenance of your Santevia 5-Stage Alkaline Replacement Filter (Model S121). This filter is designed for use with the Santevia Gravity Water System to enhance water quality by reducing contaminants and adding beneficial minerals.

The Santevia 5-Stage Alkaline Replacement Filter is engineered to provide pure-tasting, mineralized alkaline water. It effectively reduces hazardous impurities such as lead, chlorine, and pharmaceuticals, while simultaneously adding essential minerals like calcium, magnesium, and potassium. This process also raises the pH level of your water, contributing to a smoother taste and supporting your body's alkalinity.

Product Overview

The Santevia 5-Stage Alkaline Replacement Filter is a key component of the Santevia Gravity Water System. It features multiple filtration layers designed to purify and mineralize tap water.

Image: The Santevia 5-Stage Alkaline Replacement Filter, showcasing its multi-layered design.

Image: A diagram illustrating the various stages of filtration within the Santevia 5-Stage Filter, highlighting its comprehensive purification process.

Key Benefits:

• Reduces lead, chlorine, and other contaminants.
• Adds essential minerals like calcium, magnesium, and potassium.
• Raises water pH level by up to +2.0 units for alkalinity.
• Optimizes water taste for a fresh and delicious experience.

Setup and Installation

This section guides you through the initial setup and installation of your Santevia 5-Stage Alkaline Replacement Filter into your Santevia Gravity Water System.

Unboxing and Initial Preparation:

1. Carefully remove the replacement filter from its packaging.
2. Rinse the new filter thoroughly under cold tap water for several minutes to remove any loose carbon particles.
3. If your Santevia Gravity Water System includes mineral stones, ensure they are clean and properly placed in the lower tank.

Installing the Filter:

1. Remove the old filter from the upper tank of your Santevia Gravity Water System.
2. Screw the new Santevia 5-Stage Alkaline Replacement Filter securely into the designated opening in the base of the upper tank. Ensure a tight seal to prevent unfiltered water from bypassing the filter.
3. Place the upper tank back onto the lower tank of the system.

Image: The Santevia 5-Stage Filter correctly installed within the upper chamber of the Santevia Gravity Water System, ready for use.

First Use and Priming:

1. Fill the upper tank of your Santevia Gravity Water System with tap water.
2. Allow the water to filter through completely into the lower tank. Discard the first two full tanks of filtered water. This primes the filter and removes any residual manufacturing dust.
3. Your Santevia Gravity Water System is now ready for regular use.

Operating Instructions

Using your Santevia Gravity Water System with the 5-Stage Alkaline Replacement Filter is straightforward.

1. Filling the System: Lift the lid of the upper tank and pour tap water directly into it. The water will slowly filter through the 5-Stage filter into the lower tank.
2. Filtration Process: The gravity-fed system allows water to pass through the multiple layers of the filter, removing impurities and infusing minerals. This process takes time, ensuring thorough filtration.
3. Dispensing Water: Once the water has filtered into the lower tank, use the spigot at the bottom of the system to dispense clean, mineralized alkaline water into your glass or bottle.

Image: A person pouring tap water into the upper tank of the Santevia Gravity Water System, initiating the filtration process.

Image: A woman filling a glass with filtered water from the spigot of the Santevia Gravity Water System, demonstrating easy access to purified water.

Maintenance

Regular maintenance ensures optimal performance and longevity of your Santevia 5-Stage Alkaline Replacement Filter and Gravity Water System.

Filter Replacement:

The 5-Stage Alkaline Replacement Filter should be replaced regularly to maintain water quality. The typical lifespan is approximately 4-5 months, depending on usage and local water quality. Replace the filter by unscrewing the old one and installing a new one as described in the Setup section.

System Cleaning:

Periodically clean the entire Santevia Gravity Water System, including the upper and lower tanks, with mild soap and warm water. Rinse thoroughly to remove any soap residue. Do not use abrasive cleaners or put components in a dishwasher.

Troubleshooting

If you encounter any issues with your Santevia 5-Stage Alkaline Replacement Filter or Gravity Water System, refer to the following common solutions:

• Slow Filtration: Ensure the filter is not clogged. If the filter is old, it may be time for replacement. Also, check that the ceramic filter (if applicable to your system) is clean.
• Unusual Taste: If the water develops an unusual taste, it may indicate that the filter needs to be replaced. Ensure the initial priming steps were followed correctly.
• Leaking: Check all connections and ensure the filter is screwed in tightly. Verify that the spigot is properly installed and sealed.

For persistent issues, please contact Santevia customer support.

Specifications

Warranty and Support

Santevia products are manufactured to high-quality standards. For information regarding product warranty, please refer to the documentation included with your Santevia Gravity Water System or visit the official Santevia website.

For technical support, replacement parts, or any inquiries, please contact Santevia customer service through their official channels.