Metra 99-6515W Single DIN Bianco Car Dash Kit for Fiat 500 2012-Up Instruction Manual

Introduction

This manual provides essential information for the installation and use of the Metra 99-6515W Single DIN Bianco Car Dash Kit. This kit is specifically designed to facilitate the installation of an aftermarket single DIN radio into 2012-Up Fiat 500 vehicles without requiring dash cutting or modification. It is engineered for a precise, gapless fit, matching factory colors and textures.

Image: Metra 99-6515W Single DIN Bianco Car Dash Kit. This image displays the primary components of the dash kit, including the radio housing and trim panel, designed for seamless integration into the Fiat 500 dashboard.

Package Contents

Verify that all items listed below are present in your package:

• Radio Housing
• Radio Trim Panel
• Radio Housing Brackets
• Step-by-step instructions (included with the physical product)

Tools Required

The following tools are recommended for a successful installation:

• Panel Removal Tool
• Phillips Screwdriver
• Socket Wrench
• 86-5618 Radio Removal Keys (if applicable for factory radio removal)

Installation (Setup)

This dash kit is designed for a straightforward installation of a single DIN aftermarket radio into compatible Fiat 500 vehicles. No modifications to the vehicle's dashboard are required. The kit ensures a factory-matched appearance and a secure fit.

1. Preparation: Ensure the vehicle's battery is disconnected before beginning any electrical work.
2. Factory Radio Removal: Carefully remove the factory radio and associated trim panels using the recommended tools. Refer to your vehicle's service manual or specific guides for detailed instructions on removing the factory components.
3. Kit Assembly: Follow the step-by-step instructions provided with your Metra 99-6515W kit to assemble the radio housing, trim panel, and brackets around your new single DIN aftermarket radio.
4. Wiring: Connect the aftermarket radio's wiring harness to the vehicle's wiring harness, ensuring all connections are secure and properly insulated.
5. Installation into Dash: Mount the assembled radio and dash kit into the vehicle's dashboard opening. Ensure all mounting points are secured and the kit sits flush with the surrounding dash.
6. Reassembly: Reinstall any removed trim panels and reconnect the vehicle's battery.
7. Testing: Power on the vehicle and test the functionality of the new radio.

Note: Detailed, visual step-by-step instructions are included with the physical product to guide you through the installation process.

Operating

The Metra 99-6515W dash kit is a mounting solution for an aftermarket radio. It does not have operational functions itself. The operation of your car's audio system will depend entirely on the aftermarket single DIN radio installed using this kit. Refer to the instruction manual provided with your aftermarket radio for operational details.

Maintenance

This dash kit requires minimal maintenance. To clean the surface, use a soft, damp cloth. Avoid abrasive cleaners or solvents, as these may damage the finish. Ensure no liquids enter the radio opening or come into contact with electrical components.

Troubleshooting

• Poor Fitment: If the dash kit does not fit flush or appears misaligned, re-check all mounting points and ensure the radio housing and trim panel are correctly assembled according to the provided instructions. Verify that all factory components were removed completely and cleanly.
• Color Discrepancy: The Metra 99-6515W is specified as "Bianco" (White). While designed to match factory colors, slight variations may occur due to vehicle age, sun exposure, or manufacturing tolerances.
• Radio Not Functioning: If the aftermarket radio does not power on or function correctly after installation, verify all wiring connections. Ensure the vehicle's battery is properly reconnected and fuses are intact. Consult the aftermarket radio's manual for specific troubleshooting steps.

Specifications

Warranty Information

Specific warranty details for the Metra 99-6515W Car Dash Kit are not provided in this manual. For information regarding product warranty, please refer to the documentation included with your purchase or contact Metra Electronics Corp directly.

Support

If you encounter any issues or have questions not covered in this manual, please contact Metra Electronics Corp customer support for assistance. Refer to the official Metra website or product packaging for current contact information.