Product Overview
This manual provides instructions for the proper use and maintenance of the Kaldewei Enamel Care Kit. This kit is designed to clean and maintain enameled surfaces, ceramics, and chrome faucets, ensuring their longevity and appearance.
Image: Kaldewei Enamel Care Kit for cleaning bathroom surfaces.
Safety Information
Always read the product label before use. Keep out of reach of children. Avoid contact with eyes and skin. In case of contact, rinse thoroughly with water. Do not ingest. Use in a well-ventilated area. Store in a cool, dry place, away from direct sunlight and extreme temperatures.
Setup
The Kaldewei Enamel Care Kit is ready for immediate use. No assembly or special setup procedures are required. Ensure the surface to be cleaned is free from loose debris before application.
Operating Instructions
- Preparation: Ensure the surface is dry and clean from any loose dirt or soap residue.
- Application: Apply a small amount of the Kaldewei Enamel Care liquid onto a soft, damp cloth.
- Cleaning: Gently rub the cloth over the enameled, ceramic, or chrome surface in circular motions. Focus on areas with stains or grime.
- Rinsing: After cleaning, rinse the surface thoroughly with clean water to remove all product residue.
- Drying: Dry the surface with a clean, dry, lint-free cloth to prevent water spots and achieve a streak-free shine.
Note: For stubborn stains, allow the product to sit for a few minutes (e.g., 2-3 minutes) before rinsing, but do not let it dry completely on the surface.
Maintenance
Regular use of the Kaldewei Enamel Care Kit will help maintain the pristine condition of your bathroom surfaces. For best results, use the product as needed, typically weekly or bi-weekly, depending on usage and water hardness.
- Do not use abrasive sponges, scouring pads, or harsh chemical cleaners, as these can damage the enamel or chrome finish.
- Always store the product with the cap tightly closed to prevent evaporation and maintain product efficacy.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Streaks remain after drying | Insufficient rinsing or dirty drying cloth. | Rinse more thoroughly with clean water and use a fresh, dry, lint-free cloth for drying. |
| Stains not completely removed | Stain is old, particularly stubborn, or has set. | Apply product, let it sit for a few minutes (do not let dry), then scrub gently with a soft cloth and rinse. Repeat if necessary. |
| Product not effective on surface | Surface material is not enamel, ceramic, or chrome. | Verify the surface material. This product is specifically formulated for enameled, ceramic, and chrome surfaces. |
Specifications
- Brand: Kaldewei
- Model Number: 687673600000
- Item Form: Liquid
- Scent: Lemon
- Item Volume: 100 Milliliters
- Surface Recommendation: Bathtub, Shower, Faucet, Ceramic
- International Article Code (EAN/UPC): 04001112305072
Warranty and Support
For specific warranty information regarding Kaldewei products, please refer to the documentation provided with your original purchase or visit the official Kaldewei website. For further assistance or technical support, please contact Kaldewei customer service directly.
Kaldewei Official Website: www.kaldewei.com
