Introduction
This manual provides instructions for the Dynex DX-RC01A-12 and DX-RC02A-12 TV remote controls. These remotes are designed to operate various Dynex LCD and LED TV models, including DX-32L100A13, DX-26L100A13, DX-42E250A12, DX-37L200A12, DX-46L261A12, DX-19L200A12, DX-32L221A12, DX-32L200A12, DX-24L200A12, DX-32E250A12, DX-40L261A12, DX-46L262A12, DX-32L230A12, DX-46L260A12, DX-24L230A12, DX-19E220A12, DX-40L260A12, and DX-15E220A12. No programming is required; simply install batteries for immediate use.
Setup
Battery Installation
- Locate the battery compartment on the back of the remote control.
- Slide the battery compartment cover downwards or press the latch and lift to open.
- Insert two (2) AAA batteries, ensuring the positive (+) and negative (-) terminals align with the markings inside the compartment.
- Replace the battery compartment cover by sliding it back into place until it clicks securely.
Figure 1: Front view of the Dynex remote control. This image displays the layout of the buttons, including power, number pad, navigation, volume, and channel controls.
Operating Instructions
The Dynex remote control is designed for intuitive operation. Point the remote directly at your Dynex TV for optimal performance.
Key Functions:
- POWER: Turns the TV on or off.
- INPUT: Cycles through available input sources (HDMI, Video, Component, VGA).
- Number Pad (0-9): Directly selects channels.
- VOL (+/-): Increases or decreases the volume level.
- CH (+/-): Changes the channel up or down.
- MUTE: Silences the TV audio.
- MENU: Accesses the TV's main menu.
- ENTER: Confirms selections within menus.
- Navigation Arrows (Up, Down, Left, Right): Navigates through menu options.
- EXIT: Exits the current menu or on-screen display.
- INFO: Displays current channel information.
- GUIDE: Accesses the electronic program guide (if supported by your TV and service).
- RECALL: Switches between the current and previously viewed channel.
- FAVORITE: Accesses favorite channels list.
- VIDEO, HDMI, TV, COMP, VGA: Direct input selection buttons.
- MTS/SAP: Selects audio multi-track sound or secondary audio program.
- SLEEP: Sets a timer for the TV to turn off automatically.
- CCD: Activates Closed Captioning.
- ZOOM: Adjusts the screen zoom level.
- PICTURE: Accesses picture settings.
- AUDIO: Accesses audio settings.
- CH-LIST: Displays the channel list.
Maintenance
Cleaning the Remote Control
To clean the remote, gently wipe its surface with a soft, dry cloth. Do not use liquid cleaners, sprays, or abrasive materials, as these may damage the remote.
Battery Care
- Replace batteries when the remote's response becomes sluggish or inconsistent.
- Remove batteries if the remote will not be used for an extended period to prevent leakage.
- Dispose of used batteries according to local regulations.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote not responding to TV. |
|
|
| Some buttons are not working. |
|
|
Specifications
- Brand: Dynex
- Model Numbers: DX-RC01A-12, DX-RC02A-12 (also FBA_4330247860)
- Compatible Devices: Dynex LCD/LED Televisions
- Connectivity Technology: Infrared (IR)
- Color: Black
- Special Feature: Ergonomic design
- Maximum Number of Supported Devices: 1 (Television)
- Controller Type: Button Control
- Power Source: 2 x AAA batteries (not included)
- Approximate Maximum Range: 10 Miles (Note: Actual effective range indoors is typically much shorter, usually 15-30 feet depending on conditions.)
Warranty
This product typically comes with a 30-day warranty from the seller. Please refer to your purchase documentation for specific warranty terms and conditions.
Support
For any issues or questions regarding your Dynex remote control, please contact the seller directly. They are committed to providing feedback within 36 hours.