Welcome
Thank you for choosing the Dynasty Hardware K-8038-S-10B Two Ring Cabinet Knob. This manual provides detailed instructions for the proper installation, care, and maintenance of your new cabinet knobs. Please read this manual thoroughly before beginning installation to ensure a smooth process and optimal performance.
Product Overview
Key Features:
- Height: 1 inch
- Diameter: 1-3/8 inches
- Finish: Oil Rubbed Bronze (10B)
- Material: Durable Zinc Alloy
- Mounting Hardware: Includes 8/32 thread - 1 inch long screw
Product Images:
Front view of the Dynasty Hardware K-8038-S-10B Two Ring Cabinet Knob in Oil Rubbed Bronze finish.
The cabinet knob shown with its included 1-inch mounting screw, ready for installation.
Technical diagram illustrating the precise dimensions of the K-8038-S-10B cabinet knob, including height, diameter, and base measurements.
Technical Specifications
| Brand | Dynasty Hardware |
| Model Number | K-8038-S-10B-25PK |
| Material | Zinc Alloy |
| Finish | Oil Rubbed Bronze (10B) |
| Diameter | 1-3/8 inches |
| Height | 1 inch |
| Included Components | Knob, 8/32 thread - 1" long screw |
| Item Weight | 3.22 pounds (for 25-pack) |
| Product Dimensions | 6.75 x 4.75 x 3.25 inches (packaging) |
| Unit Count | 25.0 Count |
Package Contents
Your package should contain the following items:
- 25 x Dynasty Hardware K-8038-S-10B Two Ring Cabinet Knobs
- 25 x 8/32 thread - 1" long mounting screws
If any items are missing or damaged, please contact customer support immediately.
Setup and Installation
Required Tools (Not Included):
- Phillips head screwdriver
- Drill (if new holes are required)
- Measuring tape or ruler
- Pencil
Installation Steps:
- Prepare the Cabinet Door/Drawer: If replacing existing knobs, remove the old hardware. If installing on new cabinets, determine the desired location for the knob. Use a measuring tape and pencil to mark the center point for the screw hole.
- Drill the Hole (if necessary): If installing on new cabinets or if the existing hole is not suitable, carefully drill a pilot hole at the marked center point. Ensure the drill bit size is appropriate for an 8/32 thread screw (typically 5/32" or 4mm). Drill from the front of the cabinet door/drawer to prevent splintering.
- Attach the Knob: Insert the included 1-inch mounting screw through the back of the cabinet door or drawer, aligning it with the drilled hole.
- Secure the Knob: Place the Dynasty Hardware cabinet knob onto the screw from the front side. Turn the knob clockwise to thread it onto the screw.
- Tighten: Using a Phillips head screwdriver, gently tighten the screw from the back of the cabinet door/drawer until the knob is firmly secured. Do not overtighten, as this may strip the screw or damage the cabinet.
- Test: Gently pull on the knob to ensure it is securely attached and does not wobble.
Operating Instructions
The Dynasty Hardware K-8038-S-10B Cabinet Knob is designed for simple and reliable operation. To open a cabinet door or drawer, grasp the knob firmly and pull. To close, push the door or drawer until it latches securely.
Care and Maintenance
To maintain the finish and appearance of your Dynasty Hardware cabinet knobs, follow these simple guidelines:
- Cleaning: Wipe the knobs regularly with a soft, damp cloth. Avoid using abrasive cleaners, harsh chemicals, or polishes, as these can damage the oil rubbed bronze finish.
- Avoid Scratches: Be mindful of sharp objects that could scratch the knob's surface.
- Periodic Check: Periodically check the tightness of the mounting screws. If a knob feels loose, gently tighten the screw from the back of the cabinet door/drawer with a Phillips head screwdriver.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Knob is loose or wobbly. | Mounting screw is not tight enough. | Gently tighten the mounting screw from the back of the cabinet door/drawer with a Phillips head screwdriver. |
| Knob does not sit flush. | Debris behind the knob or uneven surface. | Remove the knob, clean the surface, and re-install, ensuring no obstructions. |
| Screw spins freely and does not tighten. | Screw hole is stripped or screw is damaged. | Try a slightly larger screw (if available and compatible) or use a wood filler to repair the hole before re-drilling. If the screw is damaged, replace it. |
Warranty Information
The Dynasty Hardware K-8038-S-10B Two Ring Cabinet Knob comes with a 10-Year Warranty. This warranty covers defects in material and workmanship under normal use. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, please contact Dynasty Hardware customer support.
Customer Support
For further assistance, questions, or to report any issues with your Dynasty Hardware product, please visit the official Dynasty Hardware store or contact their customer service department.
Online Store: Dynasty Hardware Store on Amazon
Please have your model number (K-8038-S-10B-25PK) and purchase information ready when contacting support.