1. Product Overview
The LAUNCH Creader VII+ V2.0 is an advanced OBD2 diagnostic scan tool designed to provide comprehensive vehicle system analysis. It features a 3.5-inch TFT color display for clear readability and supports various diagnostic functions across multiple vehicle systems.
Figure 1: LAUNCH Creader VII+ V2.0 Main Unit
Device Components
- Power Indicator: Illuminates when the device is powered on.
- Communication Indicator: Illuminates when the device is communicating with the vehicle.
- LCD Display: 3.5-inch TFT color screen for displaying information.
- OK Button: Confirms selections.
- ESC Button: Exits current menu or cancels operation.
- DTC Button: Accesses the Diagnostic Trouble Code (DTC) library.
- USB Port: For connecting to a computer for updates or data transfer.
- TF Card Slot: For inserting the TF card, primarily used for software updates.
2. What's in the Box
Verify that all items are present in the package:
- 1pc x Launch Creader VII+ V2.0 Main Unit
- 1pc x OBDII Cable
- 1pc x USB Cable
- 1pc x Card Reader
- 1pc x User Manual
Figure 2: Package Contents
3. Setup
3.1 Initial Power-Up
- Connect the OBDII cable to the Creader VII+ V2.0 unit.
- Locate the OBDII port in your vehicle (usually under the dashboard).
- Plug the OBDII connector into the vehicle's port. The device will power on automatically.
- Follow the on-screen prompts to select your preferred language. The device supports English, Spanish, French, German, Italian, Chinese, Polish, and more.
3.2 Software Update (Recommended)
To ensure optimal performance and access to the latest vehicle data, it is recommended to update the device software. There are two methods: via TF card (recommended) or via USB cable.
Video 1: Guide on how to update the LAUNCH Creader VII+ V2.0 software.
- Before starting, connect the device to a computer via its USB cable.
- On the device, navigate to "Help" -> "Tool Information" -> "Register Code" (password) and record the displayed information.
- Visit the official LAUNCH website (as indicated in the device's boot screen or manual) and download the "Updating Tool".
- Install the updating tool on your computer.
- Open the installed client software.
- Insert the TF card into its reader, then connect the TF card reader to your PC.
- In the software, type in the "Serial Number" (found on the back of the device) and the "Register Code" (password) obtained in step 2.
- Select the desired software updates and click "Download".
- Once complete, reinsert the TF card into the tool. The tool will prompt you to upgrade; select OK to proceed.
4. Operating Instructions
4.1 Connecting to the Vehicle
Ensure the vehicle's ignition is in the ON position (engine off or running, depending on the test). Connect the Creader VII+ V2.0 to the vehicle's 16-pin OBDII port.
4.2 System Diagnostics (ENG/AT/ABS/SRS)
The Creader VII+ V2.0 can access and diagnose four main vehicle systems: Engine, Transmission (AT), Anti-lock Braking System (ABS), and Supplemental Restraint System (SRS).
Figure 3: Four System Diagnostics Capability
- Read Codes: Retrieve Diagnostic Trouble Codes (DTCs) from the selected system.
- Clear Codes: Erase DTCs from the system after repairs are made, turning off warning lights.
- View Live Data Stream: Display real-time sensor data in text or graphic format.
- Read Version Info: Access ECU information.
4.3 Full OBDII Test Modes
The device supports all 10 OBDII test modes, allowing for comprehensive emissions-related diagnostics.
Figure 4: Full OBDII Functions
- Read & Clear DTCs: Retrieve and erase generic (P0, P2, P3, U0) and manufacturer-specific (P1, U1) codes.
- Live Data Stream: View real-time data parameters.
- Freeze Frame Data: View a snapshot of sensor values when a DTC was set.
- I/M Readiness Status: Check the status of emission-related monitors.
- O2 Sensor Test: Retrieve O2 sensor monitor test results.
- On-Board Monitor Test: Retrieve results for emission-related powertrain components.
- EVAP System Test: Initiate a test of the evaporative emission system.
- Component Test: Initiate a leak test for the EVAP system.
- Vehicle Information: Retrieve VIN, Cal ID, CVN.
4.4 Reset Functions
The V2.0 model includes three updated reset functions for common maintenance tasks:
Figure 5: New Reset Functions
- Oil Reset: Resets the oil life indicator after vehicle maintenance.
- Throttle Adaption (ETS Reset): Helps update firmware or reconfigure to match new vehicle settings for the electronic throttle system.
- SAS Relearn (Steering Angle Sensor Reset): Addresses issues related to the vehicle's service and safety systems, particularly the steering angle sensor.
4.5 Live Data Stream Display
The device can display live vehicle sensor data in text and multiple graph formats, allowing for intuitive viewing of dynamic data and identification of problems. It can show up to 4 live data streams simultaneously.
Figure 6: Multiple Live Data Streams
4.6 DTC Library & Data Management
- DTC Library: A built-in library allows you to look up fault codes and view probable causes, aiding in quicker and more accurate fault location.
- Data Record and Playback: The device automatically records diagnostic information, which can be reviewed at any time.
- PC Print: Diagnostic reports can be printed after connecting the device to a PC.
Figure 7: Additional Features
Video 2: Demonstration of diagnostic functions including ABS, SRS, Transmission, and Engine code reading.
5. Vehicle Compatibility
The LAUNCH Creader VII+ V2.0 is compatible with over 10,000 vehicles, including 12V diesel cars, from various brands across America, Europe, and Asia. It supports vehicles from 1996 onwards that comply with the OBDII standard.
Figure 8: Wide Vehicle Coverage
Supported brands include, but are not limited to: Ford, GM, Chrysler, Nissan, Toyota, BMW, Benz, etc.
6. Specifications
| Feature | Detail |
|---|---|
| Brand | LAUNCH |
| Operating System | Windows (for update software) |
| Language Support | English, Spanish, French, German, Italian, Chinese, Polish, and more. |
| Automotive Fit Type | Vehicle Specific Fit |
| Model Number | 301050116 |
| Item Weight | 1.38 pounds |
| Product Dimensions | 9.2 x 7.8 x 1.7 inches |
| Item Model Number | Creader VII+ |
| Batteries | 1 Lithium Ion battery required (internal) |
| Manufacturer Part Number | CRP123+B00BGH0EAC |
7. Troubleshooting
If you encounter issues, refer to the following general troubleshooting steps:
- No Power: Ensure the OBDII cable is securely connected to both the device and the vehicle's OBDII port. Check the vehicle's battery status.
- Communication Error: Verify the vehicle's ignition is ON. Ensure the OBDII cable is not damaged. Try connecting to a different compatible vehicle to rule out device issues.
- Incorrect Readings: Ensure the device software is up-to-date. Verify the vehicle information (VIN) is correctly recognized.
- Update Issues: Double-check all steps in the software update section. Ensure a stable internet connection and that the TF card is properly inserted into the card reader.
8. Warranty and Support
The LAUNCH Creader VII+ V2.0 scan tool includes lifetime online updates at no additional fee and 5 years of quality care.
For any questions or support, please contact LAUNCH customer service. You can find contact information on the official LAUNCH website or refer to the legal disclaimer provided with your product.
Customer Support: 1-888-756-2936 (Mon-Fri 9:00 AM–6:00 PM EST)
