Brita Standard Water Filter Instruction Manual

Introduction and Product Overview

The Brita Standard Water Filter is designed to provide healthier, great-tasting tap water by reducing common impurities. This BPA-free filter utilizes ion-exchange resin and activated carbon to effectively cut the taste and odor of chlorine, and reduce copper, cadmium, and mercury impurities. Integrated mesh screens prevent black flecks, ensuring clear drinking water.

Each filter is designed to last up to two months or 40 gallons, offering a sustainable alternative to bottled water. Brita Standard Water Filters are compatible with all Brita systems, including pitchers and dispensers, with the exception of Brita Stream models.

Key Features:

• Water Filtration: Reduces chlorine (taste and odor), copper, cadmium, and mercury impurities.
• BPA-Free Construction: Ensures safe drinking water.
• Sustainable Choice: Replaces up to 1,800 standard 16.9-oz. single-use plastic water bottles annually.
• Easy Installation: No presoak required, quick and simple to install.
• Filter Lifespan: One filter lasts up to two months or 40 gallons.
• Broad Compatibility: Fits all Brita pitchers and dispensers (except Stream models).

Figure 1: Two Brita Standard Water Filters, ready for use.

Figure 2: Brita, recognized as the #1 Brand in Water Filtration.

Setup and First Use

Before using your new Brita Standard Water Filter, follow these simple steps for optimal performance and water quality.

1. Wash Hands: Always wash your hands thoroughly before handling the filter.
2. Flush Filter: Unwrap the new filter. Hold it under cold tap water and flush it for 15 seconds. This helps remove any loose carbon dust. It is normal for carbon dust to appear in your first few pitchers; simply discard this water or use it for watering plants.
3. Insert Filter: Firmly insert the flushed filter into the reservoir of your Brita pitcher or dispenser. Ensure it is seated correctly to create a tight seal.
4. Add Cold Tap Water: Fill the reservoir with cold tap water. Allow the water to filter through completely.
5. Discard First Fill: For the first two to three fills, it is recommended to discard the filtered water or use it for non-drinking purposes (e.g., watering plants) to ensure any remaining carbon dust is flushed out.

Figure 3: Visual guide for initial filter setup and replacement.

Installation Video:

Operating Instructions

Using your Brita filter is straightforward. Once the filter is installed, simply fill the top reservoir of your Brita pitcher or dispenser with cold tap water. The water will slowly pass through the filter, and the filtered water will collect in the lower chamber, ready for consumption.

The Brita Standard Filter is designed to retain beneficial minerals and electrolytes while reducing unwanted impurities, providing a clean and refreshing taste.

Figure 4: The Brita filter provides great-tasting water, with two filters offering up to 4 months of supply.

Figure 5: Brita filters are designed to help retain essential minerals and electrolytes for improved water taste.

Maintenance

Regular filter replacement is crucial for maintaining optimal water quality and filter performance. The Brita Standard Water Filter should be replaced approximately every two months or after filtering 40 gallons of water, whichever comes first.

Filter Replacement:

1. Remove the old filter from the reservoir.
2. Prepare the new filter by flushing it under cold tap water for 15 seconds.
3. Insert the new filter firmly into the reservoir, ensuring a snug fit.
4. Fill the reservoir with cold tap water and discard the first two to three filtered batches to remove any carbon dust.

For Brita pitchers with a filter indicator, reset the indicator after replacing the filter to accurately track its lifespan. Refer to your specific pitcher model's instructions for resetting the indicator.

Figure 6: Understanding how the Brita filter works with ion-exchange resin, activated carbon, and mesh screens.

Figure 7: Detailed view of the filter's internal structure, showing the resin, carbon, and mesh screens.

Troubleshooting

Black Flecks in Water:

It is normal to see small black flecks, which are harmless carbon dust, in your first few filtered pitchers. This is common with new filters and will diminish after the initial flushing and a few uses. If flecks persist, re-flush the filter under cold water for a longer period (e.g., 30-60 seconds) and ensure it is firmly seated in the reservoir.

Slow Filtration:

If water is filtering very slowly, ensure the filter is correctly installed and not clogged. Sometimes, air bubbles can get trapped; try removing the filter and re-inserting it firmly. If the filter is old and has reached its capacity (2 months or 40 gallons), it may be time for a replacement.

Unpleasant Taste/Odor:

If the filtered water still has an unpleasant taste or odor, it may indicate that the filter has reached its end of life and needs to be replaced. Ensure you are using genuine Brita filters, as off-brand filters may not provide the same level of contaminant reduction.

Figure 8: Brita recommends using genuine filters for certified contaminant reduction.

Specifications

Figure 9: Brita products are certified by the Water Quality Association and meet NSF/ANSI standards.

Figure 10: Contaminant reduction comparison across different Brita filter types and other brands.

Warranty and Support

Brita offers a 30-day, unconditional, 100% money-back guarantee on all Brita® Pitchers, Faucet Filter Systems, Water Bottles, and Filters.

For more information on product usage, new products from Brita, or to locate retailers, please visit www.brita.com or call 1-800-24-BRITA (1-800-242-7482).