BLACK+DECKER VG11 User Manual

1. Product Overview

The BLACK+DECKER VG11 is a versatile 3-in-1 portable device designed to provide essential power and inflation capabilities. It functions as a jump starter for vehicles, a power station with AC and USB outputs, and an air compressor for various inflation needs.

• 3-IN-1 Functionality: This portable device combines a jump starter, a power station, and an air compressor.
• Vehicle Compatibility: The jump starter is suitable for a wide range of vehicles equipped with a 12V battery.
• LED Work Light: Features an integrated, swivel, ultra-bright LED work light for illumination in low-light conditions.
• Internal Battery: Powered by a 12V / 17Ah sealed lead-acid battery.
• Power Source: Equipped with 2 USB ports and a 230V AC outlet to provide power for various electronic devices.

Figure 1.1: Front view of the BLACK+DECKER VG11, showing the control panel, 230V AC outlet, and USB ports.

2. Safety Information

Read and understand all safety warnings and instructions before operating this product. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.

General Safety Precautions:

• Always wear eye protection when working with batteries.
• Ensure adequate ventilation when charging or jump starting.
• Keep children and unauthorized persons away from the work area.
• Do not expose the unit to rain or wet conditions.
• Do not operate the unit if it has been dropped or damaged.
• Do not attempt to jump start a frozen battery.
• Ensure proper polarity when connecting jump starter cables to a battery.
• Do not use the air compressor for breathing air or for inflating objects beyond their recommended pressure.

3. Setup and Initial Charging

Before first use, fully charge the BLACK+DECKER VG11 for at least 24 hours. This ensures the internal battery is conditioned for optimal performance.

Charging Procedure:

1. Locate the charging port on the unit.
2. Connect the provided AC charging adapter to the unit's charging port.
3. Plug the AC charging adapter into a standard 230V wall outlet.
4. The charging indicator lights will illuminate, showing the charging status. Allow the unit to charge until all indicator lights show a full charge.
5. Once fully charged, disconnect the AC adapter from the wall outlet and then from the unit.

It is recommended to recharge the unit every 30 days when not in use to maintain battery health.

4. Operating Instructions

4.1. Jump Starting a Vehicle

Use the jump starter only on 12V lead-acid batteries. Ensure the vehicle's ignition is off and all accessories are unplugged.

1. Ensure the jump starter is fully charged.
2. Connect the RED (+) clamp to the positive terminal of the vehicle's battery.
3. Connect the BLACK (-) clamp to a non-moving metal part of the vehicle's chassis, away from the battery and fuel lines.
4. Ensure connections are secure.
5. Turn on the jump start function on the VG11 unit (if applicable, refer to specific button on unit).
6. Start the vehicle's engine. If it does not start after 5-6 seconds, wait at least 3 minutes before trying again.
7. Once the vehicle starts, disconnect the BLACK (-) clamp first, then the RED (+) clamp.
8. Recharge the VG11 unit as soon as possible after use.

Figure 4.1: The BLACK+DECKER VG11 connected to a car battery, demonstrating the jump start procedure.

4.2. Using the Air Compressor

The integrated air compressor can inflate tires, sports equipment, and other inflatables.

1. Attach the appropriate inflation nozzle to the air hose.
2. Connect the nozzle securely to the item to be inflated.
3. Turn on the air compressor switch on the unit.
4. Monitor the pressure gauge and turn off the compressor once the desired pressure is reached.
5. Disconnect the nozzle from the item and store the hose and nozzles properly.

Figure 4.2: The BLACK+DECKER VG11 being used to inflate a soccer ball, showcasing its air compressor function.

4.3. Using the Power Station (AC and USB)

The VG11 provides both 230V AC power and 5V USB power for charging or operating electronic devices.

AC Power (230V):

1. Ensure the unit is adequately charged.
2. Plug your 230V AC device into the AC outlet on the VG11.
3. Turn on the AC power switch.
4. Monitor the power consumption to ensure it does not exceed the unit's 200W limit.

USB Power (5V):

1. Connect your USB device to one of the two USB ports.
2. The USB ports typically provide power automatically.

Figure 4.3: The BLACK+DECKER VG11 providing power to a laptop, demonstrating its 230V AC power station capability.

5. Maintenance

Proper maintenance ensures the longevity and reliable operation of your BLACK+DECKER VG11.

• Recharging: Recharge the unit after every use and at least every 30 days when not in use to prevent battery discharge and damage.
• Cleaning: Clean the exterior of the unit with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
• Storage: Store the unit in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure all cables and accessories are neatly stored.
• Battery Care: The internal battery is a sealed lead-acid type and does not require water addition. Do not attempt to open the unit or replace the battery yourself.

6. Troubleshooting

If you encounter issues with your BLACK+DECKER VG11, refer to the following common problems and solutions:

7. Specifications

Figure 7.1: Dimensions of the BLACK+DECKER VG11 unit.

8. Warranty and Support

The BLACK+DECKER VG11 comes with a 2-year warranty from the date of purchase, covering defects in materials and workmanship under normal use.

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact BLACK+DECKER customer support. Refer to the product packaging or the official BLACK+DECKER website for the most current contact information in your region.

Please have your model number (VG11) and proof of purchase available when contacting support.