Acebil T1000G Tripod Kit User Manual

Introduction

The Acebil T1000G Tripod Kit is designed for professional use, offering robust stability and versatility for various camera setups. This kit includes the T1000 lightweight aluminum tripod and the GS-3 Ground Spreader, providing a stable platform for equipment weighing up to 88 lbs (40 kg). Its single-stage design allows for height adjustments from 26.4 inches (67 cm) to 56.7 inches (144 cm), making it suitable for diverse shooting environments. The integrated 100 mm base ensures compatibility with a wide range of fluid heads.

Package Contents

Please verify that all items listed below are included in your package:

• One (1) Acebil T1000 Tripod
• One (1) Acebil GS-3 Ground Spreader
• One (1) S-50 Carry Case

Product Overview

Image: The Acebil T1000G Tripod Kit, showcasing its robust black aluminum legs, central spreader, and the GS-3 ground spreader attached at the base. The tripod features a 100mm bowl for mounting a fluid head.

Setup

Assembling the Tripod

1. Remove the T1000 Tripod from its S-50 Carry Case.
2. Place the tripod on a flat, stable surface.
3. Gently extend the tripod legs outwards until they are fully spread.
4. Ensure all leg locks are securely fastened to prevent accidental collapse.

Attaching the GS-3 Ground Spreader

1. Unfold the GS-3 Ground Spreader.
2. Align the attachment points of the ground spreader with the feet of the tripod legs.
3. Securely attach each leg of the tripod to the corresponding clip or slot on the ground spreader.
4. Confirm that the ground spreader is firmly connected to all three tripod legs for maximum stability, especially on smooth surfaces.

Operating Instructions

Adjusting Height

The T1000G tripod features a single-stage design for height adjustment. To adjust the height:

• Loosen the leg locks located on each leg section.
• Extend or retract the leg sections to achieve the desired height within the range of 26.4 inches (67 cm) to 56.7 inches (144 cm).
• Once the desired height is reached, securely tighten all leg locks to ensure stability.
• Always ensure the tripod is level before mounting equipment.

Payload Capacity

The Acebil T1000G Tripod Kit is designed to support equipment weighing up to 88 lbs (40 kg). It is crucial to adhere to this maximum payload capacity to ensure the safety of your equipment and the longevity of the tripod. Exceeding this limit can lead to instability, damage to the tripod, or equipment failure.

Maintenance

Proper maintenance will extend the life of your Acebil T1000G Tripod Kit:

• Cleaning: After each use, especially in dusty or sandy environments, wipe down the tripod legs and joints with a clean, dry cloth. For stubborn dirt, a slightly damp cloth can be used, followed by thorough drying.
• Lubrication: Periodically check the leg locks and moving parts. If they feel stiff, apply a small amount of silicone-based lubricant. Avoid oil-based lubricants as they can attract dust.
• Storage: Store the tripod in its S-50 Carry Case in a cool, dry place, away from direct sunlight and extreme temperatures.
• Inspection: Regularly inspect all components for signs of wear, damage, or loose connections. Do not use the tripod if any part is damaged.

Troubleshooting

This section addresses common issues you might encounter with your T1000G Tripod Kit.

• Issue: Tripod feels unstable.
  • Solution: Ensure all leg locks are fully tightened. Verify that the GS-3 Ground Spreader is correctly attached and fully extended. Check that the tripod is placed on a flat, level surface.
• Issue: Legs are difficult to extend or retract.
  • Solution: Loosen the leg locks completely before attempting to adjust. Clean any dirt or debris from the leg sections and apply a small amount of silicone lubricant if necessary.
• Issue: Tripod wobbles when equipment is mounted.
  • Solution: Confirm that the total weight of your equipment (camera, lens, fluid head, accessories) does not exceed the 88 lbs (40 kg) payload capacity. Ensure the fluid head is securely mounted to the 100 mm base.

Specifications

Warranty and Support

For information regarding product warranty, technical support, or service, please refer to the warranty card included with your purchase or visit the official Acebil website. Contact details for customer support are typically provided in these resources.