Urmet 1145/12 Sinthesi Module Instruction Manual

1. Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Urmet 1145/12 Sinthesi Module. This module is an outdoor intercom unit designed for residential or commercial use, featuring two call buttons and durable construction. Please read this manual thoroughly before attempting installation or operation.

2. Product Overview and Features

The Urmet 1145/12 Sinthesi Module is a robust and modern intercom component. Its anodized aluminum construction ensures longevity and resistance to environmental factors. Key features include:

• Durable Construction: Made from anodized aluminum for enhanced durability.
• Two Call Buttons: Equipped with two distinct buttons for calling different internal units.
• LED Illumination: Features LED lighting for clear visibility, especially in low-light conditions.
• Outdoor Rated: Designed for external use, offering water-resistant and rust-proof properties.
• Modern Aesthetic: Styled to complement contemporary building designs.

Image showing the front view of the Urmet 1145/12 Sinthesi Module, highlighting its anodized aluminum finish and two distinct call buttons.

3. Safety Information

Adherence to safety guidelines is crucial for preventing injury and damage to the product. Please observe the following:

• Power Disconnection: Always disconnect the main power supply before performing any installation, wiring, or maintenance procedures.
• Professional Installation: Installation should only be carried out by a qualified electrician or technician in accordance with local electrical codes and regulations.
• Proper Sealing: Ensure all connections and mounting points are properly sealed to maintain the unit's water resistance, especially for outdoor installations.
• Avoid Modifications: Do not attempt to modify the unit. Unauthorized modifications can void the warranty and pose safety risks.
• Environmental Conditions: While designed for outdoor use, avoid exposing the unit to extreme temperatures or direct, high-pressure water jets.

4. Package Contents

Verify that all components are present and undamaged upon unpacking:

• 1 x Urmet 1145/12 Sinthesi Module
• Mounting Hardware (screws, anchors)
• Instruction Manual (this document)

5. Installation and Setup

Follow these general steps for installing the Urmet 1145/12 Sinthesi Module. Refer to your specific intercom system's wiring diagram for detailed connections.

1. Prepare Mounting Location: Choose a suitable outdoor location, ensuring it is protected from direct impact and allows for proper wiring access. Mark drilling points for the mounting hardware.
2. Drill Holes: Drill pilot holes at the marked locations. Insert wall anchors if necessary.
3. Wiring Connections: Connect the module's wiring to your existing intercom system's main unit. Ensure correct polarity and secure all connections. The module requires a wired electrical connection.
4. Mount the Module: Secure the Sinthesi Module to the wall using the provided mounting hardware. Ensure it is firmly attached and level.
5. Seal Connections: Apply appropriate sealant around the module's edges and cable entry points to maintain its water-resistant rating.
6. Restore Power: Once installation is complete and all connections are secure and sealed, restore power to the intercom system.
7. Test Functionality: Test both call buttons and the LED illumination to ensure proper operation.

6. Operation

Operating the Urmet 1145/12 Sinthesi Module is straightforward:

• Making a Call: To initiate a call to an indoor unit, simply press one of the two call buttons. The corresponding indoor unit will ring.
• LED Illumination: The integrated LEDs provide constant illumination for the buttons, enhancing visibility during nighttime or in dimly lit areas.

7. Maintenance

Regular maintenance helps ensure the longevity and optimal performance of your Sinthesi Module:

• Cleaning: Clean the module's surface periodically with a soft, damp cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the anodized aluminum finish.
• Inspection: Annually inspect the module for any signs of physical damage, loose connections, or wear on the seals.
• Seal Integrity: Check the integrity of the water-resistant seals around the unit. If any seals appear cracked or compromised, they should be replaced to prevent water ingress.

8. Troubleshooting

If you encounter issues with your Urmet 1145/12 Sinthesi Module, refer to the following troubleshooting guide:

If the problem persists after attempting these solutions, please contact Urmet customer support.

9. Specifications

10. Warranty and Support

For detailed warranty information, technical assistance, or to inquire about replacement parts, please refer to the official Urmet website or contact Urmet customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.