Rabalux 4077

Download PDF
Contents

Rabalux 4077 GAMMA Dimmable Floor Lamp User Manual

Introduction

This manual provides comprehensive instructions for the safe assembly, operation, and maintenance of your Rabalux 4077 GAMMA Dimmable Floor Lamp. Please read this manual thoroughly before installation and use, and retain it for future reference.

Safety Instructions

  • Always disconnect the lamp from the power supply before cleaning, maintenance, or bulb replacement.
  • Ensure the voltage indicated on the product matches your local power supply before connecting.
  • Do not use the lamp in wet or damp environments. This product has an IP20 rating, indicating it is suitable for indoor use only.
  • Do not exceed the maximum wattage specified for each bulb type (R7s: 230W, G9: 40W).
  • Keep the lamp away from flammable materials.
  • If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
  • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Package Contents

Verify that all components are present and undamaged upon opening the package:

  • Rabalux 4077 GAMMA Floor Lamp (main unit)
  • 1x R7s Halogen Bulb (max 230W)
  • 1x G9 Halogen Bulb (max 40W)
  • Instruction Manual

Setup

  1. Carefully unpack all components from the packaging. Place them on a soft, clean surface to prevent scratches.
  2. Assemble the lamp base to the main pole. Ensure all connections are secure.
  3. Attach the uplighter and reading light sections to the main pole, following the provided diagrams (if any, not included in this manual).
  4. Bulb Installation:
    • For the uplighter (top light), carefully insert the R7s halogen bulb into its fitting.
    • For the reading light (adjustable arm), carefully insert the G9 halogen bulb into its fitting.
    • Ensure bulbs are seated correctly and securely. Do not touch halogen bulbs directly with bare hands; use a cloth or glove.
  5. Place the assembled lamp on a stable, level surface.
  6. Plug the power cord into a suitable electrical outlet.
Rabalux 4077 GAMMA Dimmable Floor Lamp
This image displays the complete Rabalux 4077 GAMMA Dimmable Floor Lamp. It features a tall, slender design with a circular base, two main vertical supports, and a central rectangular control panel. At the top, a wide, frosted white glass shade acts as an uplighter. Below it, an adjustable arm extends to a smaller, focused reading light. The lamp has a satin chrome finish.

Operating Instructions

The Rabalux 4077 GAMMA Floor Lamp features two independent light sources, each with its own dimmer switch.

  • Uplighter: The main uplighter provides ambient light. It uses one R7s halogen bulb (max 230W) and is controlled by one of the dimmer switches located on the central panel of the lamp. Rotate the switch to turn the light on/off and adjust its brightness.
  • Reading Light: The adjustable reading light provides focused illumination. It uses one G9 halogen bulb (max 40W) and is controlled by the other dimmer switch on the central panel. Rotate the switch to turn the light on/off and adjust its brightness. The arm of the reading light can be adjusted to direct light as needed.

Both light sources emit a warm white light (2700 Kelvin).

Maintenance

  • Cleaning: Always ensure the lamp is unplugged and cool before cleaning. Wipe the lamp with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishing agents as these may damage the finish.
  • Bulb Replacement:
    1. Disconnect the lamp from the power supply and allow bulbs to cool completely.
    2. Carefully remove the old bulb.
    3. Insert a new bulb of the correct type and wattage (R7s max 230W for uplighter, G9 max 40W for reading light). Avoid touching halogen bulbs directly with bare hands.
    4. Reconnect the lamp to the power supply.

Troubleshooting

ProblemPossible CauseSolution
Lamp does not turn on.No power supply.
Bulb is faulty or not installed correctly.
Check if the power cord is securely plugged into a working outlet.
Check if the dimmer switch is turned on.
Inspect bulbs for damage and ensure they are correctly seated. Replace if necessary.
Dimming function not working.Incorrect bulb type installed.
Faulty dimmer switch.
Ensure dimmable halogen bulbs (R7s and G9) are used.
If the problem persists, contact customer support.

Specifications

FeatureDetail
BrandRabalux
Model Number4077
Dimensions (H x D)174 cm x 32 cm (1740mm x 320mm)
Weight11.3 kg
Uplighter Bulb Type1x R7s (Halogen)
Uplighter Max Wattage230W
Uplighter Luminous Flux4600 Lumens
Reading Light Bulb Type1x G9 (Halogen)
Reading Light Max Wattage40W
Reading Light Luminous Flux370 Lumens
Light Color Temperature2700K (Warm White)
DimmableYes
MaterialMetal (housing), Glass (shade)
ColorSatin Chrome / White
Protection RatingIP20 (Indoor Use Only)
Power SourceCorded Electric
Switch TypeDimmer (on lamp body)
Energy Efficiency ClassC/C

Warranty and Support

For warranty information, technical support, or replacement parts, please contact your original retailer or the manufacturer, Rabalux, directly. Please have your model number (4077) and proof of purchase available when contacting support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.