Introduction
This manual provides instructions for the installation, operation, maintenance, and troubleshooting of your Oxygenics 88546 PowerMassage Brushed Nickel Fixed Shower Head. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product.
Image: The Oxygenics 88546 PowerMassage Brushed Nickel Fixed Shower Head, showcasing its brushed nickel finish and multi-setting spray face with various nozzle types.
Setup and Installation
The Oxygenics 88546 PowerMassage Fixed Shower Head is designed for quick and easy installation without the need for specialized tools.
Required Tools (Not Included):
- Adjustable wrench (optional, for tightening if hand-tightening is insufficient)
- Teflon tape (plumber's tape)
- Soft cloth
Installation Steps:
- Preparation: Ensure the water supply to your shower is turned off. Remove any existing shower head by turning it counter-clockwise. Clean any debris from the shower arm threads.
- Apply Teflon Tape: Wrap the threads of the shower arm with 3-5 layers of Teflon tape in a clockwise direction. This helps prevent leaks.
- Attach Shower Head: Screw the Oxygenics 88546 PowerMassage Shower Head onto the shower arm threads by hand, turning clockwise. Tighten until snug.
- Final Tightening (Optional): If necessary, use an adjustable wrench with a soft cloth to gently tighten the shower head an additional quarter turn. Avoid overtightening, as this can damage the threads or the shower head.
- Test for Leaks: Turn on the water supply and check for any leaks around the connection point. If leaks occur, tighten slightly more or reapply Teflon tape.
Note: The internal parts are made from acetyl resin, which prevents hard mineral buildup and clogging, contributing to the product's durability.
Operating Instructions
Your Oxygenics 88546 PowerMassage Shower Head features 5 distinct spray settings for a customized showering experience.
Changing Spray Settings:
- Locate the intuitive spray selector on the face of the shower head.
- Rotate the selector clockwise or counter-clockwise to cycle through the 5 available spray patterns.
- The design allows for easy adjustment even with wet hands.
Water Pressure and Flow:
This shower head utilizes Oxygenics technology to enhance water pressure and provide a high-efficiency flow. The specific flow rate will depend on your home's water pressure.
Maintenance
Regular maintenance will help ensure optimal performance and extend the life of your Oxygenics shower head.
Cleaning the Shower Head:
- To clean the exterior, wipe with a soft cloth and a mild soap solution. Avoid abrasive cleaners or harsh chemicals, as these can damage the brushed nickel finish.
- The internal acetyl resin parts are designed to prevent mineral buildup. However, if you notice reduced water flow or clogged nozzles, gently rub the rubber nozzles with your finger or a soft brush to dislodge any mineral deposits.
- For more stubborn mineral buildup, you can soak the shower head in a solution of equal parts white vinegar and water for a few hours, then rinse thoroughly. Ensure the shower head is fully submerged.
Preventing Clogging:
The Oxygenics design, featuring acetyl resin interior components, is specifically engineered to resist clogging and performance failures due to mineral deposits.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Low Water Pressure | Mineral buildup in nozzles; low household water pressure. | Clean nozzles as described in the Maintenance section. Check household water pressure. |
| Leaking at Connection Point | Insufficient Teflon tape; loose connection. | Ensure adequate Teflon tape is applied. Tighten the shower head connection slightly. Avoid overtightening. |
| Spray Pattern Irregularities | Clogged nozzles. | Clean individual nozzles by gently rubbing them to dislodge mineral deposits. |
Specifications
| Model Number | 88546 |
| Brand | Oxygenics |
| Style | Modern |
| Shape | Round |
| Material | Metal, Acetyl Resin |
| Finish Type | Brushed Nickel |
| Color | Silver |
| Number of Settings | 5 |
| Installation Type | Fixed (Wall-mount) |
| Efficiency | High |
| Special Features | Oxygenics technology, acetyl resin interior, metal base |
| Item Weight | 12 ounces |
| Product Dimensions | 4 x 5 x 4 inches |
Warranty Information
The Oxygenics 88546 PowerMassage Brushed Nickel Fixed Shower Head comes with a limited lifetime warranty against clogging or performance failures of any kind. For specific details regarding warranty claims and coverage, please refer to the official Oxygenics website or contact customer support.
Support and Contact
If you require further assistance, have questions about your product, or need to initiate a warranty claim, please contact Oxygenics customer support.
- Manufacturer: Oxygenics
- Website: www.oxygenics.com
- Customer Service: Refer to the manufacturer's website for current contact information (phone, email, or support portal).
