1. Introduction
The GIVI TE1111 Saddlebag Support is a bike-specific tubular side bag holder designed to securely mount GIVI Easy Lock bags or other compatible soft luggage side bags on your motorcycle. This support system provides a stable and reliable platform for carrying your gear, enhancing your motorcycle's touring capabilities. It is engineered for ease of use and straightforward installation.
Image: The GIVI TE1111 Saddlebag Support, showcasing its tubular design.
2. Package Contents
The package typically includes the following items:
- 1x GIVI TE1111 Saddlebag Support
- Mounting hardware (bolts, washers, spacers, specific to your motorcycle model, if applicable)
3. Safety Information
Please read and understand all safety warnings and instructions before installation and use. Failure to do so may result in serious injury or property damage.
- Always ensure all components are securely fastened before riding.
- Regularly check bolts and connections for tightness, especially after the first few rides and periodically thereafter.
- Do not exceed the weight limit specified for your saddlebags or motorcycle. Overloading can affect motorcycle handling and stability.
- Improper installation or overloading can lead to loss of control or damage to your motorcycle and the saddlebag support.
- Ensure the installed support does not interfere with any moving parts of the motorcycle (e.g., rear wheel, chain, suspension) or obstruct lighting.
4. Setup and Installation
4.1 Tools Required
Basic hand tools such as wrenches, Allen keys, and possibly a torque wrench may be required for installation. Refer to your motorcycle's service manual for specific torque values.
4.2 Installation Steps
Follow these general steps for installing the GIVI TE1111 Saddlebag Support. Specific details may vary based on your motorcycle model. Always refer to any model-specific instructions provided by GIVI.
- Preparation: Ensure your motorcycle is stable on a stand. Remove any existing components that obstruct the installation area, such as passenger grab handles or existing luggage racks, as per your motorcycle's service manual.
- Identify Mounting Points: Locate the designated mounting points on your motorcycle's frame or subframe. These are typically near the rear passenger footpegs and under the rear seat/fender.
- Attach Brackets: Secure the main support brackets to the motorcycle's frame using the provided hardware. Do not fully tighten bolts at this stage.
- Mount Saddlebag Support: Position the GIVI TE1111 tubular support onto the attached brackets. Align all mounting holes.
- Secure Connections: Insert and hand-tighten all remaining bolts, washers, and nuts. Ensure the support is correctly aligned and symmetrical on both sides of the motorcycle.
- Final Tightening: Systematically tighten all bolts to the manufacturer's specified torque values. Start from the main frame connections and work outwards. Double-check all connections for security.
- Functionality Check: Once installed, gently test the stability of the support. Ensure it does not interfere with any moving parts of the motorcycle, such as the rear wheel, chain, or suspension.
Image: The GIVI TE1111 Saddlebag Support shown installed on the rear of a motorcycle.
5. Operating Instructions
Once the GIVI TE1111 Saddlebag Support is securely installed, you can attach your GIVI Easy Lock saddlebags or other compatible soft luggage.
- Attaching Bags: Follow the instructions provided with your specific saddlebags for attachment. Typically, Easy Lock bags will click into place on the tubular supports. For soft luggage, use the straps and buckles to secure them firmly to the support frame.
- Load Distribution: Distribute the weight evenly between both saddlebags. Place heavier items lower and closer to the motorcycle's center of gravity to maintain optimal handling.
- Security Check: Before each ride, ensure that both saddlebags are securely fastened to the support and that all straps are tight. Periodically check during long rides to ensure nothing has loosened.
6. Maintenance
To ensure the longevity and proper function of your GIVI TE1111 Saddlebag Support, regular maintenance is recommended:
- Regular Cleaning: Clean the support regularly with mild soap and water to remove dirt, grime, and road salt. Avoid abrasive cleaners that could damage the finish.
- Inspection: Periodically inspect all mounting bolts and connections for tightness. Vibrations from riding can cause fasteners to loosen over time.
- Damage Check: Check the tubular frame for any signs of damage, bends, or cracks, especially after any impact or fall. Replace damaged components immediately to ensure safety.
7. Troubleshooting
If you encounter issues with your GIVI TE1111 Saddlebag Support, consider the following:
- Fitment Issues: If the saddlebag support does not align correctly with your motorcycle's mounting points, double-check that you have the correct model-specific adapter (if required) and that all components are oriented correctly. Refer to your motorcycle's service manual and the GIVI installation diagram. Minor adjustments to brackets may sometimes be necessary, but significant force should not be required.
- Loose Bags: If saddlebags feel loose, ensure all straps are properly tightened and that the bags are correctly engaged with the Easy Lock mechanism (if applicable). Overloading can also contribute to instability.
- Unusual Noises: If you hear rattling or other unusual noises, stop and inspect all mounting points and connections for looseness or interference with other motorcycle components.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | GIVI |
| Model | TE1111 |
| Item Weight | 4.05 pounds |
| Product Dimensions | 13.78"L x 13.78"W x 13.78"H |
| Vehicle Service Type | Motorrad |
| Manufacturer | GIVI UK Ltd. |
| Manufacturer Part Number | TE1111 |
9. Warranty Information
GIVI products typically come with a manufacturer's warranty covering defects in materials and workmanship. For specific warranty terms, duration, and claim procedures, please refer to the official GIVI website or contact your authorized GIVI dealer. Keep your proof of purchase for warranty claims.
10. Customer Support
For technical assistance, spare parts, or further inquiries regarding your GIVI TE1111 Saddlebag Support, please contact GIVI customer support through their official website or consult your local GIVI dealer. Provide your product model number (TE1111) and purchase details when seeking support.
