nanoblock Peko-chan Model NBH_039 Instruction Manual

Introduction

This instruction manual provides detailed guidance for assembling the nanoblock Peko-chan model, NBH_039. nanoblock is a micro-sized building block system that allows for the creation of intricate and detailed models. Please read these instructions carefully before beginning assembly to ensure a smooth and enjoyable building experience.

Safety Information

• Choking Hazard: This product contains small parts and is not suitable for children under 3 years of age. Keep all components away from infants and young children to prevent accidental ingestion.
• Recommended Age: The manufacturer recommends this product for ages 6 years (72 months) and older.
• Handling: Handle small blocks with care. Avoid placing blocks in the mouth or nose.
• Storage: Store unused blocks and the assembled model in a safe place to prevent loss or damage.

Package Contents

Before starting assembly, please verify that all components are present in the package:

• Assorted nanoblock pieces required for the Peko-chan model.
• Detailed assembly instruction sheet/diagram.

If any parts are missing or damaged, please refer to the "Troubleshooting" section for assistance.

Assembly Instructions

Follow the step-by-step diagrams provided on the included instruction sheet. nanoblock models are built layer by layer, typically from the base upwards. Pay close attention to the color and shape of each block as indicated in the diagrams.

1. Preparation: Unpack all nanoblock pieces and lay them out on a clean, flat surface. It may be helpful to sort pieces by color or size.
2. Start from the Base: Begin by constructing the base of the model as shown in the first steps of the instruction diagram.
3. Layer by Layer: Carefully follow the diagrams to add blocks layer by layer. Ensure each block is firmly connected to the previous layer.
4. Detailing: As you progress, add smaller detail pieces according to the instructions.
5. Completion: Continue until all layers and details are complete, forming the final Peko-chan model.

Figure 1: Fully assembled nanoblock Peko-chan model. This image displays the intricate details and vibrant colors of the completed model. Use this as a reference during assembly.

If you encounter difficulty, re-examine the diagrams and ensure all blocks are correctly oriented and placed.

Handling and Display

Once assembled, the nanoblock Peko-chan model is a display item. While durable, it is not designed for rough play.

• Display: Place the model on a stable, flat surface away from direct sunlight and extreme temperatures to prevent discoloration or warping.
• Handling: When moving the model, support it from the base to prevent pieces from detaching. Avoid dropping or applying excessive force.

Maintenance

To keep your nanoblock Peko-chan model clean and in good condition:

• Dusting: Gently dust the model regularly with a soft brush or a can of compressed air to remove accumulated dust.
• Cleaning: For more thorough cleaning, carefully wipe the blocks with a slightly damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the plastic. Ensure the model is completely dry before displaying.

Troubleshooting

Specifications

• Brand: nanoblock
• Model Number: NBH_039
• Product Name: Peko-chan
• Manufacturer: Kawada
• Recommended Minimum Age: 6 years (72 months)
• Package Dimensions: Approximately 14cm x 14cm x 4.5cm
• Material: ABS Plastic

Warranty and Support Information

For specific warranty details, please refer to the documentation included with your product or visit the official nanoblock website. If you require assistance with missing parts, assembly issues, or general inquiries, please contact Kawada customer support through their official channels.

Manufacturer: Kawada Co., Ltd.

Please note that warranty terms and support availability may vary by region.