Introduction
The MAX MT717 Heat Resistant Gloves are designed to provide protection against contact heat up to 300°C. These gloves are suitable for various applications requiring thermal protection, such as handling hot objects in industrial settings, construction, or other environments where high temperatures are present. Always ensure proper usage and maintenance to maximize the lifespan and protective capabilities of the gloves.
Safety Instructions
Read and understand all safety instructions before using the gloves. Failure to follow these instructions may result in injury or damage to the gloves.
- Temperature Limit: These gloves are rated for contact heat up to 300°C. Do not expose them to temperatures exceeding this limit.
- Not for Open Flame: These gloves are not designed for direct contact with open flames or molten materials.
- Chemical Protection: These gloves do not provide protection against chemicals. Avoid contact with corrosive or hazardous substances.
- Electrical Hazard: These gloves are not electrically insulating. Do not use them near live electrical circuits.
- Inspection: Always inspect gloves for cuts, tears, holes, or any signs of damage before each use. Damaged gloves offer reduced protection and must be replaced immediately.
- Fit: Ensure the gloves fit properly. Gloves that are too loose or too tight can impair dexterity and reduce protection.
- Storage: Store gloves in a cool, dry place away from direct sunlight and extreme temperatures.
Before First Use
- Remove all packaging materials from the gloves.
- Visually inspect the gloves for any manufacturing defects or shipping damage.
- Try on the gloves to ensure a comfortable and secure fit.
Operating Instructions
Follow these steps for proper use of your MAX MT717 Heat Resistant Gloves:
- Donning: Slide your hands into the gloves, ensuring your fingers are fully seated in each digit and the cuff extends adequately over your wrist for maximum protection.
- Handling Hot Objects: When handling hot objects, maintain a firm grip. The gloves provide thermal insulation, but prolonged contact with extremely hot surfaces will eventually transfer heat. Minimize direct contact time.
- Dexterity: While designed for protection, be mindful of reduced dexterity when performing intricate tasks. Practice handling objects to become accustomed to the feel of the gloves.
- Removal: Carefully remove gloves after use, especially if they have been exposed to high temperatures, to avoid transferring heat to unprotected skin.
Image: MAX MT717 Heat Resistant Gloves, showing the general appearance of the product.
Care and Maintenance
Proper care extends the life and effectiveness of your gloves.
- Cleaning: If the gloves become soiled, gently wipe them with a damp cloth. Do not machine wash or tumble dry, as this may damage the heat-resistant properties.
- Drying: Allow gloves to air dry completely at room temperature, away from direct heat sources or sunlight. Ensure they are thoroughly dry before storing or reusing.
- Storage: Store gloves in a clean, dry, and well-ventilated area. Avoid storing them in compressed conditions or near sharp objects that could cause damage.
- Disposal: Dispose of worn-out or damaged gloves according to local regulations.
Troubleshooting
If you encounter issues with your gloves, consider the following:
- Reduced Heat Resistance: If gloves feel less protective, inspect for damage. Over time, repeated exposure to high temperatures can degrade materials. Replace if significant degradation is observed.
- Physical Damage (Cuts/Tears): Any significant cut, tear, or hole compromises the protective barrier. Do not attempt to repair damaged gloves; replace them immediately.
- Unusual Odor: A strong or unusual odor after use may indicate material degradation due to excessive heat exposure. Discontinue use and replace.
Product Specifications
| Model Number | MT717 |
| Brand Name | MAX |
| Temperature Rating | Up to 300°C (Contact Heat) |
| Recommended Uses | Construction, Industrial Heat Handling |
| Item Weight | 158 Grams |
| Package Dimensions | 33 x 19.8 x 6.6 cm |
Warranty and Support
For information regarding warranty coverage, product support, or to report any issues, please contact the manufacturer directly. Keep your purchase receipt as proof of purchase.
