Introduction
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Atlantic Zeneo 200L Vertical Wall-Mounted Monophase Water Heater. Please read this manual thoroughly before installation and keep it for future reference.
Image: Front view of the Atlantic Zeneo 200L Vertical Wall-Mounted Monophase Water Heater. It is a cylindrical, white unit with the 'atlantic' logo vertically aligned on its side.
Safety Information
Always observe the following safety precautions to reduce the risk of injury or damage:
- Installation and maintenance must be performed by qualified personnel only.
- Ensure the power supply is disconnected before any work on the appliance.
- Do not operate the water heater if it is damaged or malfunctioning.
- Ensure proper grounding to prevent electrical shock.
- Do not block ventilation openings.
- Keep flammable materials away from the water heater.
Product Overview
The Atlantic Zeneo water heater is designed for efficient and reliable hot water production. Key features include:
- Dynamic ACI Hybrid Anti-Corrosion Protection: Combines a titanium anode with a magnesium coating for enhanced tank protection against corrosion, adapting to various water types.
- Reinforced Insulation: Contributes to energy savings by minimizing heat loss.
- Electronic Thermostat: Ensures stable water temperature and precise control.
- Steatite Heating Element: Protected from direct contact with water, reducing limescale build-up and simplifying maintenance.
- Bi-metallic Dielectric Connector: Included to prevent galvanic corrosion at pipe connections.
- Front Terminal Block: For easier electrical connections.
- Accelerated Heating: Designed to reduce the time required to heat water.
- Dry-Heating Protection Function: Prevents the heating element from operating without water in the tank.
Setup and Installation
Proper installation is crucial for the performance and longevity of your water heater. Consult a qualified professional for installation.
Pre-Installation Checks:
- Verify that the installation location can support the weight of the full water heater (approx. 250 kg).
- Ensure adequate space for maintenance and ventilation around the unit.
- Confirm that the electrical supply matches the water heater's requirements (230V, 2200W, monophase).
Installation Steps (Summary):
- Mount the wall bracket securely to a load-bearing wall using appropriate fasteners.
- Carefully lift and hang the water heater onto the wall bracket.
- Install the supplied bi-metallic dielectric connector on the cold water inlet.
- Connect the cold water supply to the inlet and the hot water outlet to your plumbing system.
- Install a safety group (pressure relief valve) on the cold water inlet, ensuring it is properly drained.
- Connect the electrical wiring to the front terminal block, ensuring proper grounding.
- Fill the tank with water before connecting to the main power supply.
- Check for leaks and verify proper operation.
Operating Instructions
Once installed and filled, operating your Atlantic Zeneo water heater is straightforward.
Initial Start-up:
- Ensure the tank is completely filled with water by opening a hot water tap until water flows freely.
- Connect the water heater to the main electrical supply.
- The electronic thermostat will automatically begin heating the water to the factory preset temperature.
Temperature Adjustment:
Refer to the control panel on the unit for temperature adjustment. Typically, a dial or buttons allow you to set the desired water temperature. Avoid setting the temperature too high to prevent scalding and save energy.
Energy Saving Tips:
- Set the temperature to a comfortable level (e.g., 55-60°C) rather than the maximum.
- Consider using a timer if your unit supports it, to heat water during off-peak electricity hours.
- Ensure the unit is well-insulated, especially if installed in an unheated area.
Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your water heater.
Annual Maintenance (Recommended by a Qualified Professional):
- Inspect and clean the steatite heating element for limescale build-up.
- Check the condition of the ACI Hybrid anode and replace if necessary.
- Inspect the safety group (pressure relief valve) for proper operation and clear any blockages.
- Drain and flush the tank to remove sediment.
- Check all electrical connections for tightness and signs of wear.
User Maintenance:
- Regularly operate the safety group's manual discharge lever (once a month) to prevent blockages.
- Clean the exterior of the unit with a soft, damp cloth. Do not use abrasive cleaners.
Troubleshooting
This section addresses common issues you might encounter.
| Problem | Possible Cause | Solution |
|---|---|---|
| No hot water | No power; Thermostat tripped; Heating element failure | Check circuit breaker; Reset thermostat; Contact qualified technician |
| Insufficient hot water | Thermostat set too low; Excessive hot water usage; Limescale build-up | Increase temperature setting; Reduce usage; Descale heating element (professional) |
| Water leaking from unit | Loose connections; Faulty safety group; Tank corrosion | Tighten connections; Inspect/replace safety group; Contact qualified technician |
| Unusual noises | Sediment build-up; Heating element issue | Drain and flush tank; Contact qualified technician |
For issues not listed or if solutions do not resolve the problem, contact a qualified technician.
Specifications
| Feature | Detail |
|---|---|
| Brand | Atlantic |
| Model Number | 153120 |
| Capacity | 200 Liters |
| Power Output | 2200 Watts |
| Voltage | 230 Volts |
| Dimensions (L x W x H) | 53 x 53 x 151.5 cm |
| Weight (Empty) | 50 kg |
| Mounting Type | Wall-Mounted, Vertical |
| Special Feature | Anti-corrosion (ACI Hybrid) |
Warranty and Support
Your Atlantic Zeneo water heater comes with a manufacturer's warranty.
Manufacturer's Warranty:
This product is covered by a 2-year manufacturer's warranty. Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use and service.
Customer Support:
For technical assistance, warranty claims, or to locate an authorized service center, please contact Atlantic customer support through their official website or the contact information provided with your purchase documentation.
