1. Product Overview
The Rough Country Front Control Arm Relocation Kit is designed to optimize the front control arm angles on lifted 2007-2018 Jeep Wrangler vehicles. This kit helps to restore a more natural suspension geometry, which can significantly improve ride quality and handling characteristics, especially on vehicles with 3.5 to 4 inches of lift. By adjusting the control arm angles, the kit redirects forces more effectively into the springs, enhancing traction during braking and reducing unwanted weight shifts.
- Improves ride quality.
- Improves drive-shaft angle.
- Minimizes front control arm angle.
- Corrects castor without the need for cam-bolts or adjustable arms.
2. Safety Information
Professional Installation Recommended: Rough Country strongly recommends that a certified technician install lift systems. Knowledge of Rough Country instructions, suspension procedures, and post-installation checks are required. Installation without the necessary knowledge and expertise may impact the integrity and operating safety of the vehicle.
Post-Installation Checks: It is the buyer's responsibility to ensure all bolts and nuts are checked for tightness after the first 500 miles of driving, and subsequently every 1,000 miles. The wheel alignment, steering system, suspension, and driveline systems must be inspected by a qualified, professional mechanic at least every 3,000 miles.
3. Components Included
Verify that all components listed below are present in your kit before beginning installation:
- Control arm relocation brackets
- Front lower cam bolts
- Necessary hardware (nuts, washers, etc.)
Image 1: Overview of the Rough Country Front Control Arm Relocation Kit components. This image displays the black metal relocation brackets and associated hardware, such as bolts, which are essential for installation.
4. Setup and Installation
Installation of the control arm relocation kit requires mechanical knowledge and specialized tools. It is crucial to follow the detailed instructions provided with the physical product packaging for precise steps. The general procedure involves:
- Securely lifting the vehicle and supporting it on jack stands.
- Removing the front wheels.
- Disconnecting the factory control arms from their mounting points.
- Positioning and securing the new relocation brackets to the frame.
- Reattaching the control arms to the new bracket mounting points using the provided hardware, including front lower cam bolts.
- Torquing all fasteners to manufacturer specifications.
- Reinstalling wheels and lowering the vehicle.
- Performing a professional alignment after installation.
Note: Drilling is not required for the installation of this kit.
5. Operation and Benefits
Once installed, the relocation brackets modify the geometry of your Jeep Wrangler's front suspension. This adjustment helps to correct the castor angle, which is often negatively affected by vehicle lifts. A proper castor angle contributes to better steering stability, reduced wandering, and improved overall handling, especially during braking and highway driving. The kit allows a lifted JK to operate with characteristics closer to its stock configuration, enhancing comfort and control.
6. Maintenance
Regular maintenance is essential to ensure the longevity and safe operation of your vehicle after installing the relocation kit:
- Fastener Checks: As per safety information, regularly check the tightness of all bolts and nuts, especially after the first 500 miles and then every 1,000 miles.
- Inspection: Periodically inspect the brackets and surrounding suspension components for any signs of wear, damage, or corrosion.
- Professional Review: Have a qualified mechanic inspect the wheel alignment, steering system, suspension, and driveline systems every 3,000 miles.
7. Troubleshooting
If you experience any issues after installation, consider the following common troubleshooting steps:
- Wandering or Poor Steering: This often indicates an incorrect alignment or improper castor angle. Ensure a professional alignment has been performed and verify all fasteners are torqued correctly.
- Unusual Noises: Check all mounting points for loose hardware. Inspect for any contact between suspension components or the new brackets and other parts of the vehicle.
- Reduced Ground Clearance: While these brackets are designed to improve geometry, they may slightly affect ground clearance. Ensure your lift kit is appropriate for your intended use.
For persistent issues, consult with a certified automotive technician or contact Rough Country customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Rough Country |
| Model Number | 110600 |
| Auto Part Position | Front |
| Material | Alloy Steel |
| Maximum Lifting Height Compatibility | 4 Inches (with OEM control arms), 6 Inches (with adjustable short arm design) |
| Item Weight | 18.8 pounds |
| Product Dimensions | 25.5 x 5.75 x 6 inches |
| Drilling Required | No |
| UPC | 843030145224 |
9. Warranty Information
This Rough Country Front Control Arm Relocation Kit is backed by Rough Country's Limited Lifetime Replacement Warranty. For specific terms and conditions, please refer to the official Rough Country warranty documentation or their website.
10. Customer Support
For technical assistance, installation questions, or warranty claims, please contact Rough Country customer support directly. Refer to the contact information provided on the Rough Country website or in your product packaging.
Website: www.roughcountry.com
