Woods 59785WD 6-Outlet Outdoor Yard Stake Timer with Photocell and Wireless Remote Control User Manual

Introduction

The Woods 59785WD 6-Outlet Outdoor Yard Stake Timer is designed to automate the control of outdoor lighting and electrical devices. Featuring a built-in photocell and a wireless remote control, this unit allows for scheduled operation based on ambient light conditions or user-defined timed intervals. It provides convenience and energy savings by ensuring connected devices operate only when needed.

Safety Information

Please read and understand all instructions before using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Outdoor Use Only: This product is designed for outdoor use. Ensure all connections are protected from direct water exposure.
• Grounded Connections: Always connect the timer to a grounded 3-prong outlet. Do not remove the grounding prong.
• Electrical Rating: Do not exceed the maximum electrical rating of 125V, 13A, 1625W. Overloading the unit can cause overheating and fire.
• Secure Placement: Ensure the stake is firmly inserted into the ground to prevent tipping.
• Keep Out of Reach: Keep children and pets away from the unit and connected cords.
• Disconnect Power: Always disconnect power before performing any maintenance or adjustments.
• Cord Integrity: Regularly inspect the power cord for damage. Do not use if the cord is frayed or damaged.

Package Contents

• 1 x Woods 59785WD 6-Outlet Outdoor Yard Stake Timer
• 1 x Wireless Remote Control

Product Overview

The Woods 59785WD consists of a main yard stake unit and a wireless remote control. The main unit features six grounded outlets, a photocell sensor, and a manual ON/OFF switch. The remote control allows for convenient operation from a distance.

Setup

1. Select Location: Choose an outdoor location with access to a grounded electrical outlet. Ensure the location allows the stake to be firmly inserted into the ground. Avoid placing the unit where the photocell sensor (located at the top of the unit) will be directly exposed to artificial light sources (e.g., porch lights, streetlights) at night, as this can interfere with its dusk-to-dawn functionality.
2. Install Unit: Firmly push the integrated stake into the soil until the main body of the unit is stable and upright.
3. Connect Power: Plug the timer's power cord into a grounded 125V outdoor electrical outlet.
4. Connect Devices: Plug your outdoor lights or other electrical devices into the six available grounded outlets on the timer. Ensure the safety covers are securely closed over any unused outlets.
5. Remote Control Battery: The remote control typically comes with a pre-installed battery. If the remote does not function, check or replace the battery according to the instructions on the remote itself.

Operating Instructions

The Woods 59785WD offers both manual and automated control options.

Manual Operation (Unit Switch)

• The main unit has a manual ON/OFF switch located below the outlets. This switch provides a basic override for the unit's power.
• Set the switch to 'ON' for continuous power to the outlets (subject to remote or photocell settings).
• Set the switch to 'OFF' to cut power to all outlets.

Wireless Remote Control Operation

The remote control allows you to select various operating modes. The remote has a dial with several settings:

• ON: Provides continuous power to the outlets, overriding any timed or sensor settings.
• OFF: Cuts power to all outlets.
• 2H / 4H / 6H / 8H (Timed Settings): When selected, the unit will turn on at dusk (as detected by the photocell) and remain on for the specified duration (2, 4, 6, or 8 hours), then turn off.
• SENSOR (Dusk-to-Dawn): When selected, the unit will turn on at dusk and remain on until dawn (when the photocell detects sufficient light), then turn off.

Important Note on Photocell Interaction: For the timed (2H, 4H, 6H, 8H) and SENSOR (Dusk-to-Dawn) functions to activate, the photocell on the main unit must detect darkness. If the photocell is exposed to sufficient light, these functions will not engage. This means that even if you select a timed setting on the remote, the lights will not turn on until it is dark enough for the photocell to register dusk.

Maintenance

• Cleaning: Periodically wipe the unit with a damp cloth to remove dirt and debris. Ensure the photocell sensor is clean and unobstructed for proper operation. Do not use harsh chemicals or abrasive cleaners.
• Outlet Covers: Always ensure unused outlet covers are securely closed to prevent moisture and debris from entering.
• Cord Inspection: Regularly check the power cord and connected cords for any signs of damage, fraying, or wear. Replace damaged cords immediately.
• Winter Storage: If not used year-round, store the unit in a dry, protected area during extreme weather conditions.

Troubleshooting

• Unit Not Turning On:
  • Ensure the unit is securely plugged into a working grounded outlet.
  • Check the manual ON/OFF switch on the unit; ensure it is in the 'ON' position.
  • Verify the remote control is set to 'ON' or a valid timed/sensor mode.
• Timed/Sensor Functions Not Activating (Lights Not Turning On at Dusk):
  • The photocell sensor requires sufficient darkness to activate. Ensure the photocell (located at the top of the unit) is not obstructed or exposed to artificial light sources (e.g., porch lights, streetlights, security lights) at night. Relocate the unit if necessary, or shield the photocell from interfering light.
  • Confirm the remote control is set to a timed (2H, 4H, 6H, 8H) or 'SENSOR' setting.
• Remote Control Not Working:
  • Check the battery in the remote control and replace if necessary.
  • Ensure you are within the effective range of the remote control (typically up to 60 feet).
  • Ensure there are no significant obstructions between the remote and the main unit.
• Lights Turn Off Unexpectedly:
  • If using a timed setting, the lights will turn off after the set duration.
  • If using the 'SENSOR' (dusk-to-dawn) setting, the lights will turn off when the photocell detects sufficient daylight.

Specifications

Warranty and Support

For specific warranty information and details regarding your Woods 59785WD product, please refer to the documentation included with your purchase or visit the official Woods website. If you encounter any issues or require technical assistance, please contact Woods customer support through their official channels.