1. Introduction
Thank you for purchasing the Homelegance Upholstered California King Bed. This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your new bed. Please read this manual thoroughly before beginning assembly and retain it for future reference.
The Homelegance Upholstered California King Bed, model 2112KPU-1CK*, features a contemporary design with a padded dark brown bi-cast vinyl finish, offering both style and comfort to your bedroom setting.
2. Safety Information
WARNING: Failure to follow these safety instructions could result in serious injury or damage to the product.
- Always assemble the bed on a soft, clean surface to prevent scratches.
- Ensure all bolts and screws are securely tightened before use. Periodically check and re-tighten as necessary.
- Do not allow children to play on or around the bed during assembly.
- This bed is designed for use with a box spring. Failure to use a box spring may void the warranty and compromise structural integrity.
- Keep small parts out of reach of children.
- Use appropriate lifting techniques when moving heavy components, such as the headboard. Assistance from another person is recommended.
3. Package Contents
Before beginning assembly, verify that all parts listed below are present and undamaged. If any parts are missing or damaged, do not proceed with assembly. Contact customer support for assistance.
| Part | Description | Quantity |
|---|---|---|
| Headboard | Upholstered headboard with channel tufting. | 1 |
| Footboard | Upholstered footboard. | 1 |
| Side Rails | Left and Right upholstered side rails. | 2 |
| Support Slats | Wooden slats for mattress support. | Multiple |
| Hardware Pack | Bolts, washers, nuts, and Allen wrench. | 1 |
Note: Specific quantities of slats and hardware may vary slightly. Refer to the diagram in the assembly section for visual confirmation.
4. Setup and Assembly
Assembly requires two adults. Approximate assembly time: 30-60 minutes. Tools required: Included Allen wrench.
Step-by-Step Assembly:
- Unpack Components: Carefully remove all parts from the packaging. Lay them out on a clean, soft surface (e.g., a rug or blanket) to prevent damage.
- Attach Side Rails to Headboard: Align the side rails with the pre-drilled holes on the headboard. Secure them using the provided bolts and washers. Do not fully tighten yet.
- Attach Side Rails to Footboard: Connect the other end of the side rails to the footboard in the same manner. Ensure the footboard is facing the correct direction.
- Tighten All Connections: Once all four corners are connected, carefully stand the bed frame upright. Systematically tighten all bolts using the Allen wrench. Ensure all connections are snug and secure.
- Install Support Slats: Place the wooden support slats across the side rails. Ensure they are evenly spaced and secured if there are pre-drilled holes or clips. These slats provide foundational support for your box spring and mattress.
- Place Box Spring and Mattress: Carefully place your California King size box spring onto the support slats, followed by your mattress.
Figure 4.1: Fully assembled Homelegance Upholstered California King Bed in a bedroom setting.
Figure 4.2: Close-up view of the upholstered headboard and footboard.
5. Usage Guidelines
- Ensure a California King size box spring and mattress are used for proper fit and support.
- Do not exceed the recommended weight capacity (consult manufacturer for specific limits if not listed).
- Avoid jumping on the bed, as this can damage the frame and slats.
- Periodically check all bolts and connections for tightness and re-tighten if necessary to maintain stability.
6. Care and Maintenance
- Cleaning the Upholstery: For routine cleaning, wipe the bi-cast vinyl/PU surface with a soft, damp cloth. For spills, blot immediately with a clean, dry cloth. For stubborn stains, use a mild soap solution and wipe clean, then dry thoroughly. Avoid harsh chemicals or abrasive cleaners.
- Frame Care: Dust the wooden components with a soft, dry cloth. Avoid direct sunlight and extreme temperature changes to prevent warping or fading.
- Hardware Check: Every 3-6 months, inspect all bolts and screws to ensure they are tight. Re-tighten any loose hardware to maintain the bed's structural integrity.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bed feels wobbly or unstable. | Loose hardware connections. | Check and tighten all bolts and screws on the headboard, footboard, and side rails. |
| Squeaking noises. | Loose connections or friction between parts. | Tighten all hardware. Ensure slats are properly seated and not rubbing against the frame. Consider applying felt pads if friction persists. |
| Parts do not align during assembly. | Incorrect orientation of parts or overtightened initial bolts. | Loosen all bolts slightly, re-align parts, then gradually tighten. Refer to assembly diagrams. |
| Missing hardware or damaged parts. | Packaging error or shipping damage. | Do not proceed with assembly. Contact Homelegance customer support with your model number and purchase details. |
8. Specifications
- Model Number: 2112KPU-1CK*
- Size: California King
- Product Dimensions: 95.5"L x 74.75"W x 48.5"H
- Color: Dark Brown
- Material: Bi-cast vinyl/PU upholstery
- Assembly Required: Yes
- Box Spring Required: Yes
- Item Weight: Approximately 150 pounds
- UPC: 782359151465
Figure 8.1: Product dimensions for the Homelegance California King Bed.
9. Warranty and Customer Support
For warranty information, please refer to the documentation included with your purchase or visit the official Homelegance website. Warranty terms and conditions may vary.
If you require assistance with assembly, missing parts, or have any questions regarding your Homelegance Upholstered California King Bed, please contact Homelegance customer support. Please refer to your product packaging or the official Homelegance website for the most current contact information.
When contacting support, please have your model number (2112KPU-1CK*) and purchase date readily available.
