Introduction
This manual provides essential information for the installation, operation, and maintenance of your CTP Series Double Rolls Covered Toilet Paper Holder. Designed for durability and ease of use, this unit is constructed from 18-gauge Type 304 stainless steel, ensuring a long-lasting and rust-proof solution for your restroom needs. Please read this manual thoroughly before installation and use.
Product Features
- Covered double roll dispenser with 1 1/8" diameter tube.
- Includes clip (Lock available for purchase separately).
- Durable Stainless Steel Construction - Made in the USA.
- Dimensions: 10 1/8" x 6 1/2" x 5".
- Pilfer-proof design with optional master lock capability.
- No moving parts for enhanced reliability.
- Hard to scratch or dent and rust-proof material.
- Easy to install, clean, and refill.
Package Contents
Please verify that all components are present before beginning installation.
- 1 x CTP Series Double Rolls Covered Toilet Paper Holder Unit
- Mounting Hardware (screws, anchors)
Setup and Installation
The CTP Series Toilet Paper Holder is designed for wall-mounted installation. Ensure you have the appropriate tools before starting.
Tools Required:
- Drill
- Drill bits appropriate for wall material and anchors
- Measuring tape
- Pencil
- Level
- Screwdriver
Installation Steps:
- Select Location: Choose a suitable wall location for mounting. Consider accessibility and standard toilet paper holder height.
- Mark Mounting Points: Hold the unit against the wall at the desired height and use a pencil to mark the two mounting holes. The mounting holes are 1" slot, 1.5" down, and 5" centers apart. Use a level to ensure the marks are horizontal.
- Drill Pilot Holes: Drill pilot holes at the marked locations. The size of the drill bit should match the wall anchors provided or suitable for your wall material.
- Insert Anchors: Insert wall anchors into the drilled pilot holes, if required by your wall type.
- Mount the Unit: Align the mounting holes on the back of the dispenser with the drilled holes/anchors. Insert and tighten the mounting screws until the unit is securely fastened to the wall. Do not overtighten.
- Verify Stability: Gently tug on the installed unit to ensure it is firmly attached and does not wobble.
Image: CTP Series Double Rolls Covered Toilet Paper Holder. This image displays the CTP Series Double Rolls Covered Toilet Paper Holder, a rectangular stainless steel unit designed for wall mounting. It features a covered design to protect the toilet paper rolls, with an opening at the bottom for dispensing. The side view shows the internal mechanism for holding the rolls.
Operating Instructions
Using the CTP Series Toilet Paper Holder is straightforward.
Loading Toilet Paper Rolls:
- Open the Unit: If a lock is installed, unlock the unit. Otherwise, the front cover can be opened to access the interior.
- Insert Rolls: Place two standard or jumbo toilet paper rolls onto the internal spindles. Ensure they are seated correctly. The tube hole diameter is 1.25 inches.
- Close the Unit: Close the front cover securely. If applicable, engage the lock to prevent pilfering.
- Dispensing: Toilet paper can be pulled from the bottom opening of the dispenser.
Maintenance and Care
To ensure the longevity and appearance of your stainless steel toilet paper holder, follow these simple maintenance guidelines:
- Cleaning: Wipe the exterior surfaces regularly with a soft, damp cloth and mild soap or a stainless steel cleaner. Avoid abrasive cleaners, scouring pads, or harsh chemicals, as these can scratch or damage the finish.
- Drying: After cleaning, dry the unit thoroughly with a clean, soft cloth to prevent water spots.
- Inspection: Periodically check the mounting screws for tightness and re-tighten if necessary to maintain stability.
Troubleshooting
This section addresses common issues you might encounter.
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit feels loose on the wall. | Mounting screws are loose or anchors are not secure. | Tighten mounting screws. If the issue persists, inspect wall anchors and replace if damaged or use more appropriate anchors for your wall material. |
| Difficulty loading toilet paper rolls. | Rolls are not aligned with the internal spindles or are too large for the 1.25" tube diameter. | Ensure rolls are centered. Verify that the roll core diameter is compatible with the 1.25" tube. |
| Cover does not close securely. | Obstruction inside the unit or a misaligned hinge/latch. | Check for any foreign objects. Inspect the hinge and latch mechanism for damage or misalignment. |
Specifications
| Attribute | Detail |
|---|---|
| Model Number | CTP-2 |
| Material | 18 Gauge Type 304 Stainless Steel |
| Finish Type | Stainless Steel |
| Installation Type | Wall Mounted |
| Roll Capacity | 2 Standard/Jumbo Rolls |
| Tube Hole Diameter | 1.25 inches |
| Mounting Hole Centers | 5 inches |
| Product Dimensions (L x W x H) | 10.13" x 6.5" x 5" |
| Item Weight | 4.2 pounds |
| Country of Manufacture | United States |
Warranty and Support
Specific warranty information for the CTP Series Double Rolls Covered Toilet Paper Holder is not provided in the product details. For any warranty claims or technical support, please contact the manufacturer or your point of purchase directly. Keep your purchase receipt as proof of purchase.
Manufacturer: Royce Rolls