1. Introduction
This manual provides essential information for the proper installation, operation, and maintenance of your Nippon NTX3007PZ Super Horn Tweeter. Please read this manual thoroughly before using the product to ensure optimal performance and safety.

Figure 1: Nippon NTX3007PZ Black Super Horn Tweeter. This image displays the black, rectangular horn-shaped tweeter with a circular housing at the rear, designed for car audio systems.
2. Product Features
- Model: Nippon NTX3007PZ
- Type: 7 1/2 X 3 1/4 Black Super Horn Tweeter
- Power Handling:
- Maximum Watts: Not specified in detail, designed for high output.
- RMS Watts: Not specified in detail, designed for continuous power.
- Tweeter Type: 3/16" PEI Balanced Tweeter
- Design: Piezo Horn
- Frequency Response: 0.8 KHz - 30 KHz
- Impedance: Not specified in detail, typically 4 or 8 Ohm for car audio.
3. Safety Information
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Please handle with care and ensure proper ventilation during installation. Always follow local regulations for disposal.
4. Setup and Installation
Proper installation is crucial for optimal performance and longevity of your tweeter. It is recommended that installation be performed by a qualified professional.
4.1. Before Installation
- Ensure your vehicle's audio system is turned off and the battery is disconnected to prevent electrical shorts.
- Verify that the tweeter's impedance and power handling are compatible with your amplifier or head unit.
- Choose a suitable mounting location that allows for proper sound dispersion and physical clearance.
4.2. Wiring
- Connect the positive (+) terminal of the tweeter to the positive (+) output of your amplifier or crossover.
- Connect the negative (-) terminal of the tweeter to the negative (-) output of your amplifier or crossover.
- Ensure all connections are secure and insulated to prevent short circuits.
4.3. Mounting
- Carefully cut an opening in the chosen mounting surface that matches the dimensions of the tweeter's horn.
- Secure the tweeter using appropriate screws through the mounting holes on its flange.
- Ensure the tweeter is firmly seated and does not vibrate.
5. Operating Instructions
The Nippon NTX3007PZ Super Horn Tweeter is a passive component designed to reproduce high-frequency sounds. Once properly installed and connected to an audio system, it will operate automatically when audio signals are sent to it.
- Initial Power-Up: After installation, reconnect your vehicle's battery. Turn on your audio system at a low volume.
- Volume Adjustment: Gradually increase the volume to a comfortable listening level. Avoid excessively high volumes, which can damage the tweeters or other audio components.
- Sound Customization: Use your head unit's or amplifier's equalizer settings to fine-tune the treble output to your preference.
6. Maintenance
The Nippon NTX3007PZ Super Horn Tweeter requires minimal maintenance.
- Cleaning: Use a soft, dry cloth to gently wipe the surface of the tweeter. Avoid using harsh chemicals or abrasive cleaners.
- Inspection: Periodically check the wiring connections to ensure they remain secure and free from corrosion.
- Environmental Factors: Protect the tweeter from extreme temperatures, direct sunlight, and excessive moisture, which can affect its performance and lifespan.
7. Troubleshooting
If you experience issues with your tweeter, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| No Sound from Tweeter |
|
|
| Distorted Sound |
|
|
| Intermittent Sound |
|
|
8. Specifications
| Attribute | Detail |
|---|---|
| Brand | Nippon |
| Model Name | NTX3007PZ |
| Speaker Type | Tweeter |
| Speaker Size | 7.5 Inches (7 1/2 X 3 1/4) |
| Product Dimensions | 7.5 x 3.2 x 4 inches (D x W x H) |
| Item Weight | 0.01 Ounces |
| Power Source | Corded Electric (requires external amplifier/head unit) |
| Connectivity Protocol | Wired (Bluetooth listed in original data is likely an error for this passive component) |
| Is Waterproof | FALSE |
| UPC | 100177405902, 151903159033, 163120504299 |
| ASIN | B00ATZLR5S |
| Date First Available | October 27, 2012 |
Note: Some specifications like "Connectivity Protocol: Bluetooth" and "Is Waterproof: FALSE" might be generic data points from the source. This tweeter is a passive component and typically connects via speaker wire, not Bluetooth.
9. Warranty and Support
This Nippon NTX3007PZ Super Horn Tweeter comes with a 1-Year Warranty from the date of purchase. This warranty covers manufacturing defects under normal use.
For warranty claims or technical support, please contact your retailer or the official Nippon support channels. Keep your proof of purchase for warranty validation.
Legal Disclaimer: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.