1. Introduction
Thank you for choosing the Paul Neuhaus ASLI 6888-55 LED Ceiling Lamp. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions carefully before installation and retain them for future reference.

Image 1.1: Front view of the Paul Neuhaus ASLI 6888-55 LED Ceiling Lamp. This square-shaped fixture features an integrated LED panel designed for modern interior lighting.
2. Safety Instructions
- Electrical Safety: Installation must be performed by a qualified electrician in accordance with local wiring regulations. Ensure the main power supply is switched off at the circuit breaker before commencing any installation or maintenance work.
- Voltage: This fixture operates on 230 Volts. Verify your electrical supply matches this requirement.
- Integrated LEDs: This luminaire contains built-in LED lamps. The lamps cannot be replaced in the luminaire. Do not attempt to replace the LEDs yourself.
- Mounting: Ensure the mounting surface is structurally sound and can support the weight of the fixture (1.8 kg).
- Cleaning: Disconnect power before cleaning. Use a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Indoor Use Only: This product is designed for indoor use in dry locations. Do not expose to moisture or extreme temperatures.

Image 2.1: Energy efficiency label for the luminaire, indicating it contains built-in LED lamps that are not replaceable. The label shows an energy efficiency class of A++ to A for LED lamps, with lower classes crossed out, confirming high energy efficiency.
3. Package Contents
Please check that all components are present and undamaged before installation:
- Paul Neuhaus ASLI 6888-55 LED Ceiling Lamp fixture (1 unit)
- Mounting hardware (screws, wall plugs)
- Instruction Manual (this document)

Image 3.1: Angled view of the Paul Neuhaus ASLI 6888-55 LED Ceiling Lamp, showcasing its slim profile and silver finish. This image helps visualize the product's design and how it might appear when installed.
4. Setup and Installation
Important: Ensure power is disconnected at the main circuit breaker before beginning installation.
- Preparation: Unpack the fixture and verify all parts are present. Read all safety instructions.
- Marking: Hold the mounting bracket against the ceiling or wall at the desired installation location. Mark the positions for drilling holes.
- Drilling: Drill holes at the marked positions. Insert appropriate wall plugs (if necessary, depending on wall material).
- Mounting Bracket: Secure the mounting bracket to the ceiling/wall using the provided screws.
- Wiring: Connect the electrical wires from the ceiling/wall to the terminal block on the fixture. Ensure correct polarity (Live, Neutral, Earth). If unsure, consult a qualified electrician.
- Attach Fixture: Carefully attach the lamp body to the mounting bracket, ensuring it is securely fastened.
- Power On: Restore power at the main circuit breaker and test the lamp.
Note: The fixture dimensions are 30 x 30 x 5.5 cm (Length x Width x Depth). Consider these dimensions for optimal placement.
5. Operating Instructions
The Paul Neuhaus ASLI 6888-55 LED Ceiling Lamp is designed for simple operation.
- Switching On/Off: Operate the lamp using a standard wall switch connected to the fixture's power supply.
- Light Output: The integrated LED panel provides 640 lumens of light with a warm white color temperature of 3000 Kelvin.
- Energy Efficiency: This fixture is highly energy-efficient, rated A++ to A, consuming 10.8 watts.
6. Maintenance
The Paul Neuhaus ASLI 6888-55 LED Ceiling Lamp requires minimal maintenance.
- Cleaning: Before cleaning, ensure the power supply to the fixture is switched off. Use a soft, dry, lint-free cloth to wipe the surface. Do not use liquid cleaners, abrasive materials, or chemical solvents, as these can damage the finish or electrical components.
- LED Longevity: The integrated LEDs have a long lifespan of approximately 25,000 hours and do not require replacement.
7. Troubleshooting
If you encounter issues with your ceiling lamp, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not light up. | No power supply, loose wiring, faulty wall switch. | Check circuit breaker. Ensure all wiring connections are secure. Test the wall switch. If problem persists, consult a qualified electrician. |
| Light flickers. | Loose wiring connection, incompatible dimmer switch (if applicable, though this model is not specified as dimmable). | Check wiring connections. Ensure the fixture is not connected to an incompatible dimmer. |
| Insufficient light output. | Not designed for larger rooms, dust accumulation on diffuser. | Ensure the lamp is suitable for the room size. Clean the diffuser gently with a dry cloth. |
For issues not listed here, please contact customer support.
8. Technical Specifications
| Model Number: | 6888-55 |
| Brand: | Paul Neuhaus |
| Product Dimensions (L x W x D): | 30 x 30 x 5.5 cm |
| Product Weight: | 1.8 kg |
| Color: | Silver |
| Material: | Metal (Silver) |
| Light Source Type: | Integrated LED |
| Number of Light Sources: | 1 (LED Panel) |
| Voltage: | 230 Volts |
| Wattage: | 10.8 Watts |
| Luminous Flux: | 640 Lumens |
| Color Temperature: | 3000 Kelvin (Warm White) |
| Energy Efficiency Class: | A++ to A |
| Lifespan: | Approx. 25,000 hours |
| Indoor/Outdoor Use: | Indoor Use Only |
9. Warranty and Support
Paul Neuhaus products are manufactured to high-quality standards. For information regarding warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official Paul Neuhaus website. For technical support or service inquiries, please contact your retailer or Paul Neuhaus customer service.
Manufacturer: Paul Neuhaus
Website: www.paul-neuhaus.de (Example link, actual link might vary)