1. Introduction
This manual provides instructions for the proper installation, operation, and maintenance of your Wall Control Pro-Grade Metal Pegboard Organizer. This system is designed for heavy-duty tool storage, offering a robust and versatile solution for garages, workshops, and tool cribs. The galvanized steel panels are engineered for durability and strength, providing a secure platform for organizing a wide range of tools and accessories.
The Wall Control system features both traditional 1/4-inch pegboard holes and proprietary slotted tool board openings, allowing for compatibility with a broad selection of hooks and accessories. The patented engagement of slotted accessories enhances hook security, ensuring tools remain in place.
2. Safety Information
- Always wear appropriate safety gear, such as safety glasses, during installation.
- Ensure the mounting surface is structurally sound and capable of supporting the weight of the pegboard panels and all intended tools. Mounting into wall studs is highly recommended for maximum stability and weight capacity.
- Do not overload the pegboard panels or individual hooks/shelves. Refer to the specifications section for weight guidelines.
- Keep small children and pets away from the installation area.
- Periodically inspect the installed system for any loose fasteners, damaged panels, or worn accessories. Tighten or replace components as necessary.
3. Package Contents
Verify that all components listed below are present in your package before beginning installation. If any items are missing or damaged, please contact Wall Control customer support.
- (4) 32"x16" Galvanized Combo Pegboard Panels
- (1) 6"x16" Tool Board Shelf Assembly
- (1) 4"x16" Tool Board Shelf /16" Dowel Assembly
- (1) Screwdriver Holder Assembly
- (12) Standard Tool Board Hooks
- (4) Medium Tool Board Hooks
- (2) Tool Board Handle Hangers, 1-1/4"
- (2) Tool Board U-Hooks 3" Reach
- (2) Tool Board C-Brackets, 1"x1"
- (2) Tool Board C-Brackets, 2"x2"
- Mounting Hardware (screws and anchors)
Four individual 16x32 inch galvanized metal pegboard panels, ready for installation.
4. Setup and Installation
The Wall Control metal pegboard panels are designed for straightforward installation. They can be mounted directly into wall studs or flat surfaces using the provided mounting hardware. The panels feature pre-drilled mounting holes on 16-inch centers to align with standard stud spacing. A built-in frame return flange ensures ample hook clearance and full access to all holes without requiring additional framework.
4.1 Tools Required
- Drill
- Phillips Head Screwdriver or Drill Bit
- Level
- Measuring Tape
- Stud Finder (recommended)
4.2 Installation Steps
- Plan Layout: Determine the desired location for your pegboard system. The four 16"x32" panels can be arranged to create a total storage area of 64"x32" or configured in other arrangements to suit your space.
- Locate Studs: Use a stud finder to locate and mark the center of wall studs where you intend to mount the panels. For maximum strength, aim to mount at least two panels into studs.
- Position First Panel: Hold the first pegboard panel against the wall at your desired height. Use a level to ensure it is perfectly horizontal. Mark the locations of the pre-drilled mounting holes.
- Drill Pilot Holes: For mounting into studs, drill pilot holes appropriate for the provided screws. For drywall-only mounting, install the provided wall anchors according to their instructions before inserting screws.
- Secure Panel: Attach the first panel to the wall using the provided screws. Do not overtighten.
- Install Subsequent Panels: Align subsequent panels with the first, ensuring they are level and properly spaced (if applicable). The panels are designed to fit together seamlessly. Repeat the drilling and securing steps for each panel.
- Verify Stability: Once all panels are mounted, gently tug on them to ensure they are securely fastened to the wall.
An example of the Wall Control metal pegboard system installed, showcasing various tools and accessories organized on the panels.
5. Operating Instructions
Your Wall Control pegboard system is designed for versatile tool organization using two types of accessories: standard 1/4-inch pegboard hooks and Wall Control's proprietary slotted accessories.
5.1 Using 1/4-inch Pegboard Hooks
The round holes on the Wall Control panels are compatible with standard 1/4-inch pegboard hooks. Simply insert the hook into the desired holes and ensure it is seated firmly.
Detail view of standard 1/4 inch pegboard hooks engaged in the round holes of the Wall Control metal panel.
5.2 Using Wall Control Slotted Accessories
The vertical slots on the panels are designed for Wall Control's slotted accessories, which offer enhanced security and stability compared to traditional pegboard hooks. To install a slotted accessory:
- Align the accessory's tabs with the desired vertical slots on the pegboard panel.
- Insert the tabs into the slots.
- Push down firmly until the accessory locks into place. The patented engagement mechanism will secure the accessory, preventing it from lifting out when tools are removed.
Detail view of Wall Control's proprietary slotted accessories securely engaged in the vertical slots of the metal pegboard panel.
5.3 Included Accessories Overview
- Shelves: The included 6"x16" and 4"x16" shelves provide flat surfaces for storing items. The 4"x16" shelf includes a 16" dowel for holding rolled items like paper towels or tape.
- Screwdriver Holder: Organize multiple screwdrivers efficiently.
- Hooks and Brackets: Utilize the various hooks (Standard, Medium, Handle Hangers, U-Hooks) and C-Brackets to hang tools of different shapes and sizes.
A black metal shelf accessory designed for the Wall Control pegboard system, providing flat storage space.
A black metal shelf accessory featuring a wooden dowel, suitable for holding paper towels or other rolled items, mounted on the pegboard.
A black metal screwdriver holder accessory, designed to organize multiple screwdrivers on the Wall Control pegboard.
6. Maintenance
The galvanized finish of your Wall Control pegboard panels provides excellent corrosion resistance and requires minimal maintenance.
- Cleaning: Wipe down the panels and accessories periodically with a damp cloth to remove dust and grime. For stubborn dirt, a mild soap solution can be used, followed by a clean, dry cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
- Inspection: Regularly inspect the mounting screws to ensure they remain tight. Check all hooks and accessories for any signs of wear, bending, or damage. Replace any compromised components to maintain safety and functionality.
7. Troubleshooting
- Hooks are not secure: Ensure that Wall Control slotted accessories are fully engaged by pushing them down firmly into the slots. For 1/4-inch pegboard hooks, verify they are inserted correctly into both holes for stability. If hooks still feel loose, consider using pegboard locks (not included) for standard pegs.
- Panels feel wobbly: Re-check all mounting screws to ensure they are tightened securely. If possible, verify that the panels are mounted into wall studs. If mounted only into drywall, ensure appropriate wall anchors were used and are holding firmly.
- Difficulty inserting accessories: Ensure you are using the correct type of accessory for the corresponding hole (round for 1/4-inch pegs, vertical slots for Wall Control slotted accessories). Do not force accessories into place.
8. Specifications
| Brand | Wall Control |
| Model | Pro-Grade Metal Pegboard Organizer (ASIN: B00ANS01EE) |
| Material | 20 Gauge Steel |
| Finish | Galvanized |
| Panel Dimensions (each) | 16 inches (W) x 32 inches (H) |
| Total Storage Area (4 panels) | 64 inches (W) x 32 inches (H) |
| Mounting Type | Wall Mount (direct to studs or flat surfaces) |
| Hole Compatibility | 1/4 inch standard pegboard pegs and Wall Control slotted accessories |
| Assembly Required | Yes |
| Included Components | 4 panels, various hooks, shelves, screwdriver holder, mounting hardware |
9. Warranty Information
Specific warranty details for the Wall Control Pro-Grade Metal Pegboard Organizer are typically provided by the manufacturer at the time of purchase or included with the product packaging. For the most accurate and up-to-date warranty information, please refer to the documentation supplied with your product or visit the official Wall Control website.
10. Support
If you have any questions, require assistance with installation, or need to report a missing or damaged part, please contact Wall Control customer support directly. You can often find contact information on the product packaging or through their official brand store.
Wall Control Brand Store: Visit the Wall Control Store on Amazon