1. Introduction
Thank you for choosing the ThruNite Archer 1A LED Flashlight. This compact and powerful everyday carry (EDC) flashlight is designed for reliability and versatility, featuring multiple brightness levels and a durable aluminum construction. Please read this manual carefully before use to ensure proper operation and maintenance.
2. Safety Information
- Eye Safety: Do not shine the flashlight directly into eyes. The powerful LED light can cause temporary vision impairment.
- Children: Keep the flashlight out of reach of children to prevent accidental activation or misuse.
- Battery Safety: Use only recommended batteries. Do not mix old and new batteries, or different types of batteries. Remove batteries if the flashlight will not be used for an extended period to prevent leakage.
- Heat: The flashlight head may become warm during prolonged use on higher modes. This is normal.
3. Package Contents
Upon opening your ThruNite Archer 1A package, please verify that all items listed below are present:
- ThruNite Archer 1A LED Flashlight
- User Manual
- Lanyard
- Spare O-rings (2)
- Spare Tail Cap Button
Image: Contents of the ThruNite Archer 1A package, including the flashlight, user manual, lanyard, spare O-rings, and a spare tail cap button.
4. Product Overview
The ThruNite Archer 1A features a robust design with key components for optimal performance.
Image: ThruNite Archer 1A flashlight, angled view, showing the head, body, and pocket clip.
Components:
- Head: Contains the LED emitter, reflector, and lens.
- Side Switch: Used for changing brightness modes.
- Body: The main housing with knurling for grip.
- Pocket Clip: Removable steel clip for secure carrying.
- Tail Cap: Houses the tactical tail switch for power on/off.
Image: Close-up of the flashlight head, showing the side switch and the 'Archer 1A V3' model designation.
Image: Close-up of the flashlight body, showing the ThruNite branding and knurling for grip.
Image: Close-up of the LED emitter and reflector inside the flashlight head.
5. Setup
Battery Installation
- Unscrew the tail cap counter-clockwise to open the battery compartment.
- Insert one 1.5V AA battery (Alkaline or Ni-MH rechargeable) with the positive (+) end facing towards the flashlight head. The Archer 1A is also compatible with 14500 Li-ion batteries for higher output.
- Screw the tail cap back on clockwise until it is fully tightened. Ensure the tail cap is securely fastened to maintain waterproofing.
6. Operating Instructions
Power On/Off
- To Turn On: Fully press the tactical tail switch until it clicks.
- To Turn Off: Fully press the tactical tail switch again until it clicks.
- Momentary On: Lightly press and hold the tail switch for momentary illumination. Release to turn off.
Changing Brightness Modes
The Archer 1A features multiple brightness levels: Firefly, Low, Medium, High, and Strobe.
- With the flashlight turned on, twist the bezel (the front part of the head) to cycle through the modes: Firefly → Low → Medium → High.
- Strobe Mode: From any mode, press and hold the side switch for approximately 1 second to activate Strobe mode. To exit Strobe, release the side switch and twist the bezel.
Memory Function
The Archer 1A includes a memory function. When the flashlight is turned off and then back on, it will automatically return to the last used general mode (Firefly, Low, Medium, or High). Strobe mode is not memorized.
7. Maintenance
- Cleaning: Clean the flashlight body with a soft, damp cloth. For stubborn dirt, use a mild soap solution. Do not use harsh chemicals or abrasives.
- Threads and O-rings: Periodically lubricate the threads and O-rings with silicone grease to ensure smooth operation and maintain waterproofing. Replace worn O-rings with the provided spares.
- Battery Storage: If the flashlight is not used for an extended period, remove the battery to prevent potential leakage and damage to the flashlight.
8. Troubleshooting
If you encounter issues with your ThruNite Archer 1A, please try the following steps:
- Light not turning on:
- Ensure the battery is inserted correctly with the positive (+) end towards the head.
- Check if the battery has sufficient charge. Replace or recharge if necessary.
- Ensure the tail cap is fully tightened. A loose tail cap can prevent electrical contact.
- Clean the battery contacts and threads with an alcohol swab to remove any dirt or corrosion.
- Light flickering or inconsistent output:
- Check battery charge and replace if low.
- Ensure the tail cap and head are securely tightened.
- Clean the battery contacts and threads.
If these steps do not resolve the issue, please contact ThruNite customer support.
9. Specifications
| Feature | Detail |
|---|---|
| LED | Cree XP-G2 LED (20+ years lifespan) |
| Max Output (using 1*1.5V AA battery) | 178 lumens |
| Output & Runtime (1.5V AA battery) | Firefly: 0.2lm (249 hrs); Low: 24lm (6 hrs); Mid: 80lm (1.5 hrs); Max: 178lm (58 minutes); Strobe: 178lm (2.5 hrs) |
| Working Voltage | 0.9V to 4.2V |
| Max Beam Distance | 184 meters |
| Peak Beam Intensity | 2993cd |
| Impact Resistant | 10 meters |
| Waterproof Rating | IPX-8 standard (submersible up to 2 meters) |
| Dimensions | 104.14mm (length) x 22.10mm (bezel diameter) |
| Weight | 60g (without battery) |
| Material | Aircraft-grade aluminum body structure, Premium Type III hard-anodized anti-abrasive finish |
| Lens | Ultra-clear tempered glass lens with anti-reflective coating |
| Reflector | Smooth reflector for maximum light output and focused beam |
| Special Features | Removable steel pocket clip, Programmable memory function, Stainless steel front striking bezel, Tactical knurling, Reversed polarity protection, Durable T-shaped thread |
10. Warranty and Support
ThruNite products are manufactured to high-quality standards. For warranty information, product support, or to purchase accessories, please visit the official ThruNite website or contact their customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.
For further assistance, you may visit the ThruNite Store on Amazon.
