1. Introduction
This manual provides essential instructions for the proper setup, operation, and maintenance of your Panasonic N5HBZ0000055 Wireless LAN Adaptor. Please read this manual thoroughly before using the product to ensure correct usage and optimal performance. Keep this manual for future reference.
2. Product Overview
The Panasonic N5HBZ0000055 is a wireless LAN adaptor designed to enable compatible devices, such as Panasonic televisions, to connect to a wireless network (Wi-Fi). This allows for access to internet-based services and content without the need for an Ethernet cable.
Figure 1: Panasonic N5HBZ0000055 Wireless LAN Adaptor. This image shows the black, rectangular USB dongle with ventilation holes on its top surface and a standard USB-A connector extending from one end.
3. Setup Instructions
Follow these steps to install and configure your Wireless LAN Adaptor:
- Identify USB Port: Locate an available USB port on your compatible Panasonic device (e.g., television). Refer to your device's manual for specific USB port locations.
- Insert Adaptor: Carefully insert the Panasonic N5HBZ0000055 Wireless LAN Adaptor into the USB port. Ensure it is fully seated.
- Power On Device: Turn on your Panasonic device.
- Access Network Settings: Navigate to the network settings menu on your device. The exact path may vary depending on your device model (e.g., Menu > Network > Network Settings).
- Select Wireless Setup: Choose the option for wireless network setup or Wi-Fi connection.
- Scan for Networks: Your device will scan for available wireless networks. Select your desired network from the list.
- Enter Password: If your network is secured, enter the Wi-Fi password (security key) using the on-screen keyboard.
- Confirm Connection: Once the password is entered, confirm the connection. Your device should now be connected to the internet wirelessly.
Note: Compatibility with specific Panasonic device models is required. Consult your device's manual or Panasonic support for compatibility information.
4. Operating Instructions
Once the Wireless LAN Adaptor is successfully set up and connected to your Wi-Fi network, your Panasonic device will automatically use this connection for internet access. No further manual operation of the adaptor itself is typically required.
- Automatic Connection: The adaptor is designed to automatically connect to the last successfully configured network when the device is powered on.
- Changing Networks: To connect to a different Wi-Fi network, repeat steps 4-8 from the "Setup Instructions" section.
- Network Status: Check your device's network settings menu to view the current connection status and signal strength.
5. Maintenance
The Panasonic N5HBZ0000055 Wireless LAN Adaptor requires minimal maintenance:
- Cleaning: Gently wipe the adaptor with a soft, dry cloth if it becomes dusty. Do not use liquid cleaners or abrasive materials.
- Storage: If removing the adaptor for extended periods, store it in a clean, dry place away from extreme temperatures and direct sunlight.
- Physical Damage: Avoid dropping the adaptor or subjecting it to physical impact, as this can damage internal components.
6. Troubleshooting
If you encounter issues with your Wireless LAN Adaptor, refer to the following common solutions:
- No Network Detected:
- Ensure the adaptor is securely inserted into the USB port.
- Verify that your Wi-Fi router is powered on and broadcasting a signal.
- Check if the adaptor is compatible with your Panasonic device model.
- Try restarting your Panasonic device and your Wi-Fi router.
- Cannot Connect to Network:
- Double-check the Wi-Fi password (security key) for accuracy. Passwords are case-sensitive.
- Ensure your device is within range of your Wi-Fi router.
- Temporarily disable any MAC address filtering on your router, or add your device's MAC address if enabled.
- Intermittent Connection / Slow Speed:
- Move your Panasonic device closer to the Wi-Fi router, or reduce obstacles between them.
- Check for interference from other electronic devices (e.g., cordless phones, microwaves).
- Restart your Wi-Fi router.
- Ensure your router's firmware is up to date.
- Adaptor Not Recognized:
- Try inserting the adaptor into a different USB port on your device, if available.
- Ensure your Panasonic device's software/firmware is up to date.
- Confirm the adaptor is genuinely compatible with your specific device model.
7. Specifications
| Brand | Panasonic |
| Model Number | N5HBZ0000055 |
| Hardware Interface | 802.11 b/g/n |
| Data Link Protocol | Ethernet (for compatibility with devices expecting Ethernet over USB) |
| Dimensions (LxWxH) | 4.8 x 4.6 x 1.1 inches |
| Item Weight | 6.9 ounces |
| UPC | 885170086296 |
8. Warranty and Support
For warranty information and technical support, please refer to the documentation included with your original Panasonic device or visit the official Panasonic support website. Keep your purchase receipt for warranty claims.
For further assistance, you may contact Panasonic customer service directly.
