Kichler Everly Single Light Bell Pendant Light Fixture (Model 42046CH)

Introduction

This manual provides instructions for the safe installation, operation, and maintenance of your Kichler Everly Single Light Bell Pendant Light Fixture, Model 42046CH. Please read all instructions carefully before beginning installation.

The Kichler Everly pendant light fixture features a bell-shaped clear glass shade and a chrome finish. It is designed for indoor use in areas such as kitchen islands, dining rooms, or living spaces. The fixture measures 13.75 inches in width and 20.25 inches in height.

Safety Information

To reduce the risk of fire, electric shock, or personal injury, always follow these basic safety precautions:

• Always turn off the electrical supply at the main fuse box or circuit breaker before installation, cleaning, or maintenance.
• Consult a qualified electrician if you are unsure about the installation process or have questions regarding electrical wiring.
• All wiring connections must be in accordance with local and national electrical codes.
• Do not exceed the maximum wattage specified for the bulb (100 watts).
• This fixture is designed for indoor use only. Do not install in wet or damp locations.
• Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Package Contents

Verify that all components are present and undamaged before beginning installation. If any parts are missing or damaged, do not attempt to install the fixture and contact customer service.

• 1 Glass Shade
• Adjustable Stems (2 x 12-inch, 2 x 6-inch)
• Canopy
• Mounting Hardware
• Instruction Manual

Note: Bulb is sold separately. The fixture requires one E26 Medium base incandescent bulb, up to 100 watts.

Specifications

Setup and Installation

This section guides you through the installation of your pendant light fixture. Professional installation is recommended if you are not familiar with electrical wiring.

Step 1: Prepare for Installation

Before starting, ensure the power supply to the installation area is turned off at the main fuse box or circuit breaker. Unpack all components and inspect them for any damage. Keep all packaging materials until installation is complete.

Step 2: Attach Mounting Bracket

Secure the provided mounting bracket to the ceiling junction box using the screws supplied. Ensure the bracket is firmly attached and level.

This image shows the canopy and the top portion of the hanging rod, illustrating how the fixture connects to the ceiling mounting point.

Step 3: Adjust Hanging Height

The fixture includes two 12-inch stems and two 6-inch stems. Select the appropriate combination of stems to achieve your desired hanging height. Thread the electrical wires through the chosen stems and the canopy. Ensure the wires are not pinched.

This image illustrates how multiple pendant lights can be hung at varying heights using the adjustable stems to suit your space.

Step 4: Make Electrical Connections

Connect the fixture's wires to the house wires according to local and national electrical codes. Typically, connect the black wire from the fixture to the black (hot) wire from the ceiling, the white wire from the fixture to the white (neutral) wire from the ceiling, and the ground wire to the ground wire. Secure all connections with approved wire nuts and ensure no bare wire strands are exposed.

Step 5: Secure Canopy and Glass Shade

Carefully push the canopy up to the ceiling, covering the junction box and wiring. Secure it in place with the provided screws. Then, slide the glass shade over the bulb socket and secure it according to the fixture's design (e.g., with a threaded ring or small screws). Install the appropriate E26 Medium base bulb (not included).

This image displays the fully assembled Kichler Everly pendant light fixture, showcasing the clear glass shade and chrome finish.

Installation Videos

For additional visual guidance, please refer to the following official installation videos:

Operating Instructions

Once the Kichler Everly pendant light fixture is correctly installed and power is restored to the circuit, operate the light using the standard wall switch connected to the fixture's electrical circuit.

The fixture is designed for one E26 Medium base incandescent bulb, up to 100 watts. You can choose a bulb that provides your desired light temperature and brightness to complement your room's ambiance.

Maintenance

Regular cleaning will help maintain the appearance and performance of your Kichler Everly pendant light fixture.

• Always turn off the power to the fixture at the circuit breaker before cleaning.
• For the glass shade, gently wipe with a clean, lint-free cloth. If necessary, use a mild glass cleaner applied to the cloth first, not directly to the fixture.
• For the chrome finish, wipe with a soft, dry, lint-free cloth.
• Avoid using abrasive cleaners, scouring pads, or cleaning products containing ammonia or alcohol, as these can damage the finish and glass.

Troubleshooting

If you encounter issues with your pendant light, refer to the following common troubleshooting steps:

Light does not turn on:

• Check that the power supply is on at the main circuit breaker.
• Ensure the bulb is correctly installed and not burnt out. Replace if necessary.
• Verify all electrical connections are secure and properly insulated.

Flickering light:

• Check the bulb for proper seating in the socket.
• Ensure the bulb wattage is compatible with the fixture's specifications (max 100W).
• Inspect wiring connections for any looseness.

Fixture is loose or wobbles:

• Tighten any visible mounting screws in the canopy.
• Ensure the mounting bracket is securely attached to the ceiling junction box.

Warranty Information

The Kichler Everly Single Light Bell Pendant Light Fixture (Model 42046CH) is covered by a manufacturer's limited warranty for one (1) year from the date of purchase. This warranty covers defects in materials and workmanship under normal use and service.

This warranty does not cover damage resulting from improper installation, accident, misuse, abuse, or normal wear and tear. For warranty claims or further details, please retain your proof of purchase and contact Kichler customer service.

Customer Support

If you require further assistance, have questions not covered in this manual, or need to report a missing or damaged part, please visit the official Kichler website or contact their customer service department.

Visit Kichler's Official Website