RUBI TX-700
Contents
RUBI TX-700 Professional Tile Cutter
User Manual
1. Introduction
The RUBI TX-700 Professional Tile Cutter is engineered for intensive cutting of various ceramic tiles, including porcelain and extruded stoneware. This manual provides essential information for the safe and efficient operation, setup, maintenance, and troubleshooting of your tile cutter. Please read this manual thoroughly before using the product.
2. Safety Instructions
Always prioritize safety when operating any tool. Failure to follow these instructions may result in injury or damage to the tool.
- Wear Personal Protective Equipment (PPE): Always wear safety glasses, gloves, and appropriate footwear.
- Stable Work Surface: Ensure the tile cutter is placed on a stable, level, and non-slip surface before operation.
- Keep Work Area Clear: Remove any debris, tools, or unnecessary items from the work area to prevent accidents.
- Inspect Before Use: Before each use, check the tile cutter for any signs of damage, loose parts, or wear. Do not use if damaged.
- Proper Handling: Always handle the cutter with care. Avoid sudden movements that could cause the tool to tip or fall.
- Children and Bystanders: Keep children and bystanders at a safe distance from the work area.
- Read Instructions: Familiarize yourself with all operating procedures before attempting to cut tiles.
3. Product Overview
Key Features
- Designed for intensive cutting of ceramic tiles, ideal for porcelain and extruded stoneware.
- 1,000 Kg breaking power for cutting the hardest materials.
- Double guide system for enhanced visibility and resistance to bending.
- Adaptable scoring wheels for optimal performance and cut quality on various materials.
- High-resistance carrying case for easy transport.
- Angular measurement system for cuts from 0 to 45 degrees.
- Lateral stop for repetitive straight and 45-degree cuts.
- Double set of rectified steel guides with anti-corrosion treatment.
- Bi-layer base with shock-absorbing effect and high-resistance aluminum base.
- Interchangeable scoring wheels from Ø 8 to 22 mm. Includes Ø 8 and 18 mm scoring wheels.
Components
Familiarize yourself with the main components of your RUBI TX-700 tile cutter:




4. Setup
Follow these steps to set up your RUBI TX-700 tile cutter:
- Unpack: Carefully remove all components from the high-resistance carrying case.
- Position: Place the tile cutter on a firm, level, and stable work surface. Ensure there is adequate space around the cutter for safe operation.
- Inspect Guides: Verify that the double steel guides are clean and free from obstructions.
- Check Scoring Wheel: Ensure the correct scoring wheel (Ø 8 or 18 mm included, or other compatible sizes) is properly installed and rotates freely.
- Adjust Lateral Stop (if needed): If making repetitive cuts, adjust the lateral stop to the desired measurement.
5. Operating Instructions
5.1. Preparing the Tile
- Clean the tile surface to ensure no debris interferes with the scoring wheel.
- Mark the desired cut line on the tile with a pencil or marker.
- Place the tile on the cutter's base, aligning the marked line with the scoring line on the machine.
5.2. Making a Straight Cut
- Position the scoring wheel at the edge of the tile furthest from you.
- Apply firm, consistent pressure to the handle and push the scoring wheel along the tile's surface towards you in a single, continuous motion.
- Ensure the scoring wheel creates a visible, continuous score line across the entire tile. Do not score multiple times.
5.3. Breaking the Tile
- Once the tile is scored, position the breaker mechanism directly over the scored line.
- Apply downward pressure to the handle, engaging the breaker. The tile will snap along the scored line.
- For harder materials, the 1,000 Kg breaking power ensures a clean break.
5.4. Making Angular Cuts (0-45°)
- Utilize the angular measurement system (see Figure 3) to set the desired angle (e.g., 15°, 30°, 45°).
- Secure the tile against the adjusted lateral stop.
- Proceed with scoring and breaking the tile as described in sections 5.2 and 5.3.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your tile cutter.
- Cleaning: After each use, clean the guides, base, and scoring wheel with a dry cloth to remove ceramic dust and debris.
- Lubrication: Periodically apply a light lubricant to the guides to ensure smooth operation of the scoring carriage.
- Scoring Wheel Replacement: Replace the scoring wheel when it becomes dull or chipped to maintain cut quality. Refer to the product specifications for compatible wheel sizes.
- Storage: Store the tile cutter in its high-resistance carrying case in a dry, clean environment, away from extreme temperatures and humidity.
- Check Fasteners: Periodically check all screws and fasteners to ensure they are tight. Do not overtighten.
7. Troubleshooting
This section addresses common issues you might encounter:
| Problem | Possible Cause | Solution |
|---|---|---|
| Uneven or chipped cuts | Dull or incorrect scoring wheel; inconsistent pressure; tile not clean. | Replace scoring wheel; apply consistent pressure; clean tile surface. |
| Difficulty breaking tile | Insufficient scoring pressure; scored line not continuous; breaker not aligned. | Ensure a deep, continuous score; align breaker precisely over the score line. |
| Scoring carriage not moving smoothly | Guides are dirty or dry. | Clean and lubricate the guides. |
| Inaccurate angular cuts | Angular stop not properly set or secured. | Verify the angular stop is correctly positioned and tightened. |
8. Technical Specifications
Below are the technical specifications for the RUBI TX-700 Professional Tile Cutter:
| Specification | Value |
|---|---|
| Manufacturer | Germans Boada |
| Model Number | 17978 |
| Product Dimensions | 46 x 18 x 105 cm |
| Product Weight | 21 kg |
| Color | Grey |
| Number of Pieces | 1 |
| Measurement System | Metric |
| Included Components | Professional TX Cutter, Ø 8 and 18 mm scoring wheels, carrying case |
| Batteries Required | No |
| First Available Date | 10 October 2013 |
9. Warranty and Support
For warranty information, technical support, or to purchase replacement parts, please contact RUBI customer service or visit the official RUBI website. Keep your purchase receipt as proof of purchase for any warranty claims.
Manufacturer: Germans Boada
Brand: RUBI
For further assistance, refer to the contact information provided with your product packaging or on the manufacturer's official channels.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.