UpBright 4-Pin 12V AC/DC Adapter User Manual

1. Introduction

This manual provides instructions for the safe and effective use of your UpBright 4-Pin DIN 12V AC/DC Adapter. This power supply is designed to provide stable 12V DC power to compatible Sanyo LCD TV Monitors, specifically models such as CLT2054, CLT1554, and others listed in the compatibility section. Please read this manual thoroughly before use.

2. Safety Information

To ensure safe operation and prevent damage to the adapter or connected devices, observe the following precautions:

• Input Voltage: The adapter supports a worldwide input voltage range of 100-240VAC, 50/60Hz. Ensure your wall outlet voltage is within this range.
• Output Compatibility: This adapter provides 12V DC output with a 4-pin DIN connector. Verify that your device requires 12V DC power and has a matching 4-pin DIN input port. Do not use with devices requiring 19.5V or other voltages.
• Protection Features: The adapter is equipped with Over Voltage Output Protection (OVP), Over Current Output Protection (OCP), and Short Circuit Output Protection (SCP) to safeguard your devices.
• Environment: Use the adapter in a dry environment. Avoid exposure to water, moisture, or extreme temperatures.
• Ventilation: Ensure adequate ventilation around the adapter during operation to prevent overheating.
• Handling: Do not drop, disassemble, or attempt to repair the adapter. Refer servicing to qualified personnel.

3. Setup and Connection

Follow these steps to connect your UpBright AC/DC adapter to your Sanyo LCD TV Monitor:

1. Verify Connector Type: Confirm that your device requires a 4-pin DIN connector. This adapter is specifically designed for this type of connection. Refer to the image below for visual confirmation of the correct connector type.

Figure 3.1: Correct 4-Pin DIN Connector (right) vs. Incorrect Connector Types (left).
2. Connect to Device: Carefully align the 4-pin DIN connector of the adapter's output cable with the corresponding input port on your Sanyo LCD TV Monitor. Insert the connector firmly but gently.


Figure 3.2: UpBright AC/DC Adapter with 4-Pin DIN Connector.

3. Connect to Power Outlet: Plug the AC input cord of the adapter into a standard wall power outlet (100-240VAC).


Figure 3.3: Example of various AC power cord types that may be supplied.

4. Power On: Once connected, your Sanyo LCD TV Monitor should receive power. Turn on your device as usual.

Important Compatibility Note: This adapter is compatible with Sanyo CLT2054, CLT2054-02, CLT1554, JD-12050-2C, JS-12050-2C, 1LB4U11B00400, 1LB4U11B00600, 1AV4U11B30100, EADP-60EB A LCD TV Monitors. It is not for 19.5V versions or other devices like Cricut Imagine, POS systems, DVR units, camera systems, mixers, or hard drives. Always confirm your device's power requirements and connector type before use.

4. Operating Instructions

The UpBright AC/DC adapter operates automatically once connected to a power source and a compatible device. No user intervention is required for its basic function.

• Ensure all connections are secure before powering on your device.
• If your device has a power switch, use it to turn the device on or off. The adapter will continuously supply power when plugged into an active outlet.
• Unplug the adapter from the wall outlet when not in use for extended periods.

5. Maintenance

To ensure the longevity and proper functioning of your adapter:

• Cleaning: Disconnect the adapter from power and device before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
• Storage: Store the adapter in a cool, dry place when not in use. Avoid wrapping the cables too tightly.
• Inspection: Periodically inspect the adapter and cables for any signs of damage, such as frayed wires or cracked casing. If damage is found, discontinue use and replace the adapter.

6. Troubleshooting

If your device is not powering on or functioning correctly with the adapter, consider the following:

• No Power:
  • Ensure the adapter is securely plugged into a working wall outlet.
  • Verify the 4-pin DIN connector is fully inserted into your device's power input.
  • Check if the wall outlet is functional by plugging in another device.
• Device Not Compatible:
  • Double-check your device's power requirements (voltage, amperage, connector type) against the adapter's specifications. This adapter is for 12V DC devices with a 4-pin DIN connector.
  • Confirm your device is one of the compatible Sanyo models listed in this manual.
• Adapter Overheating:
  • Unplug the adapter immediately.
  • Ensure it is not covered or placed in an enclosed space that restricts airflow.
  • If overheating persists, discontinue use and contact support.

If troubleshooting steps do not resolve the issue, refer to the Warranty and Support section.

7. Specifications

8. Warranty and Support

Your UpBright AC/DC Adapter comes with the following warranty and support:

• Refund Policy: UpBright offers a 30-day refund policy from the date of purchase.
• Exchange Policy: A 24-month exchange policy is provided for defective units.
• Warranty Certificate: This product includes a UpBright Limited Warranty Certificate.

Figure 8.1: Example of UpBright Limited Warranty Certificate.

For warranty claims or technical assistance, please contact the retailer or UpBright customer service through their official channels. Please have your purchase details and product model information ready.