Shure SBC200-US Dual Docking Charger User Manual

Introduction

The Shure SBC200-US Dual Docking Charger is designed to efficiently recharge SB900A batteries, either when they are installed within compatible Shure transmitters or when they are removed. This charging station provides a convenient and reliable power solution for your wireless microphone systems, ensuring your equipment is always ready for use. Up to four SBC200 stations can be powered by a single PS45US power supply.

Image: The Shure SBC200-US Dual Docking Charger, a compact black unit with two charging bays and LED indicators, designed for efficient battery recharging.

Setup

1. Unpack the Charger: Carefully remove the SBC200-US Dual Docking Charger and the PS45US Power Supply from their packaging.
2. Connect Power Supply: Connect the PS45US Power Supply to the DC input jack on the rear of the SBC200-US charger. Plug the power supply into a suitable AC outlet.
3. Daisy-Chain Multiple Chargers (Optional): If using multiple SBC200-US chargers, up to four units can be connected in a daisy-chain configuration using the provided power pass-through ports. This allows a single PS45US power supply to power all connected units. Ensure secure connections for stable operation.
4. Placement: Place the charger on a stable, flat surface, away from excessive heat or moisture.

Operating Instructions

The SBC200-US charger is designed for straightforward operation, allowing you to charge SB900A batteries both inside and outside of their transmitters.

• Charging Batteries in Transmitters:

  Insert the compatible Shure transmitter (e.g., ULXD2, QLXD2, AD2) with the SB900A battery installed into one of the charging bays. Ensure the transmitter is correctly seated and the charging contacts align. The charging indicator LEDs on the charger will illuminate to show the charging status.

• Charging Standalone Batteries:

  Remove the SB900A battery from its transmitter. Insert the battery directly into one of the charging bays. Ensure the battery is oriented correctly for proper contact. The charging indicator LEDs will provide feedback on the charging status.
• Charging Indicators:

  LED Status	Meaning
  Solid Green	Battery fully charged.
  Flashing Green	Battery charging.
  Solid Amber	Battery temperature out of range or charging error.
  Flashing Amber	Battery fault.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the exterior of the charger. Avoid using abrasive cleaners or solvents.
• Contact Points: Periodically inspect the charging contact points on both the charger and the batteries/transmitters for any debris or corrosion. Clean gently with a cotton swab if necessary.
• Storage: When not in use for extended periods, store the charger in a cool, dry place.

Troubleshooting

Specifications

• Model: SBC200-US
• Compatible Devices: SB900A Batteries
• Power Supply: PS45US (included)
• Input Voltage: 240 Volts (from power supply)
• Output Voltage: 6.8 Volts
• Wattage: 10 watts
• Item Weight: 2.31 pounds (1.05 Kilograms)
• Product Dimensions: 11.8 x 9.8 x 3.9 inches
• Connector Type: MagSafe (referring to the charging interface, not Apple's MagSafe)
• Certifications: UL, FCC, CE

Warranty and Support

Shure products are known for their high quality and reliability. For warranty information, technical support, or service inquiries, please visit the official Shure website or contact your local Shure distributor. Always refer to the official Shure documentation for the most up-to-date warranty terms and conditions.

You can find more information and products from Shure by visiting the Shure Store on Amazon.