Stanley 31199 TimeIt Twin 2-Outlet Grounded Mechanical Timer User Manual

1. Introduction

This manual provides comprehensive instructions for the safe and efficient operation of your Stanley 31199 TimeIt Twin 2-Outlet Grounded Mechanical Timer. This device is designed to automatically control two electrical devices by turning them ON and OFF at programmed times. Please read this manual thoroughly before use and retain it for future reference.

2. Important Safety Instructions

• WARNING: To reduce the risk of fire or electric shock, do not use this device with extension cords unless the plugs can be fully inserted.
• For indoor use only. Do not expose the timer to water or moisture.
• Do not exceed the specified electrical ratings: 125V/15A/1875W.
• Ensure the timer is securely plugged into a grounded outlet.
• Do not disassemble or attempt to repair the timer. Contact qualified service personnel if repair is needed.

3. Product Overview

The Stanley 31199 TimeIt Twin features a 24-hour mechanical dial for setting ON/OFF times, a manual override switch, and two grounded outlets located on the sides. The unique slide pin construction ensures pins are not easily lost.

4. Setup

1. Prepare Pins: Before programming, ensure all pins on the timer dial are in the 'UP' position. Each pin represents a 30-minute interval.
2. Set Current Time: Rotate the entire dial clockwise until the current time of day aligns with the arrow indicator on the timer's face. Pay attention to AM/PM markings.

5. Operating Instructions

1. Program ON/OFF Times: Push down the pins corresponding to the desired 'ON' times. For 'OFF' times, leave the pins in the 'UP' position. The program repeats daily.
2. Connect Devices: Plug the timer into a grounded wall outlet. Ensure the timer is set to the correct current time.
3. Plug in Appliances: Plug up to two devices into the grounded outlets on the sides of the timer. Ensure the devices are working properly before connecting them to the timer.
4. Select Mode: Use the manual override switch located on the side of the timer to select between 'TIMER ON' (for programmed operation) or 'OUTLET ON' (for continuous power, bypassing the timer function).

Instructional Videos

6. Maintenance

• To clean the timer, wipe it with a dry, soft cloth. Do not use liquid cleaners, solvents, or abrasive materials.
• Store the timer in a cool, dry place when not in use for extended periods.

7. Troubleshooting

• Timer not turning ON/OFF: Verify that the pins are correctly pushed down for ON times and up for OFF times. Ensure the manual override switch is in the 'TIMER ON' position.
• No power to devices: Check that the timer is securely plugged into a functional wall outlet. Confirm the manual override switch is not in the 'OFF' position (if applicable, this model has 'OUTLET ON' and 'TIMER ON').
• Pins are stiff or difficult to adjust: Gently use a small, non-metallic tool (like a toothpick) to push or pull the pins. Avoid excessive force.
• Timer is making a ticking noise: This is normal for mechanical timers and indicates it is operating.

8. Specifications

9. Warranty and Support

The Stanley 31199 TimeIt Twin 2-Outlet Grounded Mechanical Timer comes with a 3-year limited warranty. For warranty claims, technical assistance, or customer support, please refer to the contact information provided with your original purchase documentation or visit the official Stanley website.