Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Teka Baltic Sport Shower Set model 790026700. Please read this manual carefully before installation and use to ensure proper function and longevity of the product. Keep this manual for future reference.
Safety Information
- Always turn off the main water supply before beginning any installation or maintenance work.
- Ensure all connections are secure to prevent leaks.
- Do not use abrasive cleaners or harsh chemicals on the chrome finish, as this may cause damage.
- If you are unsure about any part of the installation process, consult a qualified plumber.
Package Contents
Verify that all components are present before starting the installation:
- Shower Set (including shower head, hose, and rail)
- Mounting Hardware
- Installation Manual (this document)
Setup and Installation
Follow these steps for proper installation of your Teka Baltic Sport Shower Set:
- Prepare the Installation Area: Turn off the main water supply. Clear the area where the shower set will be installed.
- Mount the Shower Rail: Position the shower rail on the wall at the desired height. Mark the drilling points for the mounting brackets. Drill holes and insert wall plugs. Secure the mounting brackets to the wall using the provided screws.
- Attach the Shower Rail: Slide the shower rail onto the mounted brackets and secure it according to the specific design of your rail.
- Connect the Shower Hose: Attach one end of the 175 cm braided steel hose to the shower mixer outlet (not included) and the other end to the shower head. Ensure all connections are hand-tightened, then use a wrench to gently tighten further, being careful not to overtighten.
- Place the Shower Head: Insert the shower head into the adjustable holder on the shower rail.
- Test for Leaks: Turn on the main water supply and check all connections for any leaks. If leaks occur, tighten the connections slightly until they stop.
Image 1: The complete Teka Baltic Sport Shower Set, including the shower rail, adjustable holder, and round shower head, ready for installation. This image illustrates the components that need to be assembled and mounted on the wall.
Operating Instructions
The Teka Baltic Sport Shower Set is designed for ease of use:
- Adjusting Water Flow and Temperature: Use your existing shower mixer (not included) to control the water flow and temperature.
- Using the Shower Head: The round shower head features an anti-limescale system. Water sprays from multiple nozzles.
- Adjusting Shower Head Height: The shower head holder on the rail can be easily adjusted up or down to suit individual preferences. Simply press the release button or lever on the holder and slide it to the desired position.
Image 2: A close-up front view of the Teka Baltic Sport round shower head, showcasing its multiple nozzles and anti-limescale design.
Image 3: A side view of the Teka Baltic Sport shower head, highlighting its ergonomic handle and chrome finish.
Maintenance
Regular cleaning and maintenance will ensure the longevity and appearance of your shower set:
- Cleaning the Chrome Finish: Clean the chrome surfaces regularly with a soft cloth and mild soap or a non-abrasive cleaner specifically designed for chrome. Rinse thoroughly with clean water and dry immediately to prevent water spots.
- Anti-Limescale System: The shower head is equipped with an anti-limescale system. Periodically rub the rubber nozzles on the shower head to dislodge any mineral deposits. For stubborn deposits, a solution of white vinegar and water can be used, but ensure it is rinsed off completely.
- Hose Maintenance: Inspect the braided steel hose periodically for any signs of wear or damage. Replace if necessary.
Troubleshooting
Here are solutions to common issues you might encounter:
| Problem | Possible Cause | Solution |
|---|---|---|
| Low water pressure from shower head | Clogged nozzles or mineral buildup. | Clean the shower head nozzles by rubbing them to remove limescale. If necessary, soak the shower head in a descaling solution. |
| Water leaking from connections | Loose connections or worn washers. | Ensure all connections are tightened properly. Check and replace any worn rubber washers. |
| Shower head not staying in position | Holder mechanism is loose or worn. | Tighten the holder mechanism if possible. If worn, the holder may need replacement. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Teka |
| Model Number | 790026700 |
| Color | Chrome |
| Finish Type | Chromed |
| Number of Handles | 1 (for shower mixer, not included) |
| Item Weight | 5.8 Kilograms |
| Hose Length | 175 cm (Braided Steel) |
| GTIN | 08413509203667 |
| Manufacturer | Teka |
Warranty and Support
For warranty information and customer support, please refer to the documentation provided at the point of purchase or visit the official Teka website. Keep your proof of purchase for any warranty claims.
