1. Introduction
This manual provides detailed instructions for the proper setup, operation, and maintenance of your Hype Bluetooth Speaker with Handset, model HY-101. Please read this manual thoroughly before using the device to ensure optimal performance and longevity.
2. Package Contents
Verify that all items are present in the package:
- Hype Bluetooth Speaker with Handset (HY-101)
- Charging Cable
- User Manual (this document)
3. Product Overview
The Hype Bluetooth Speaker with Handset combines a wireless speaker with a comfortable handset for making and receiving calls. It features a dedicated cradle for your smartphone and a perforated speaker grille for clear audio output.
Figure 1: Hype Bluetooth Speaker with Handset HY-101. The image displays the black speaker unit with a handset on the left and a smartphone (likely an iPhone) docked on the right, resting on a perforated speaker grille surface.
Key Components:
- Handset: Ergonomically designed for comfortable calls.
- Speaker Grille: Provides audio output for music and speakerphone calls.
- Smartphone Cradle: Securely holds your smartphone.
- Control Buttons: (Specific buttons not visible in image, general description) Power, Volume Up/Down, Bluetooth Pairing, Call Answer/End.
- Charging Port: For connecting the charging cable.
4. Setup
4.1. Charging the Device
- Connect the charging cable to the charging port on the Hype Bluetooth Speaker.
- Plug the other end of the charging cable into a compatible USB power adapter (not included) or a powered USB port.
- The charging indicator light (if present) will illuminate, typically red, during charging and turn off or change color when fully charged.
- Allow approximately 2-3 hours for a full charge before initial use.
4.2. Bluetooth Pairing
To use the Hype Bluetooth Speaker with Handset wirelessly, it must be paired with your smartphone or other Bluetooth-enabled device.
- Ensure the Hype Bluetooth Speaker is charged and powered on.
- Activate Bluetooth on your smartphone or device.
- Press and hold the Bluetooth Pairing button on the Hype Bluetooth Speaker (refer to device for exact button location, often indicated by a Bluetooth symbol) until the indicator light flashes, indicating it is in pairing mode.
- On your smartphone, search for available Bluetooth devices.
- Select "HY-101" or a similar name from the list of found devices.
- Once paired, the indicator light will typically stop flashing and remain solid, and your smartphone may confirm the connection.
Note: If pairing fails, ensure the device is within range (typically 10 meters), fully charged, and not connected to another device. Restart both devices and try again.
5. Operating Instructions
5.1. Making and Receiving Calls
- Making a Call: Dial the number on your smartphone. The call will automatically route through the Hype Handset if connected. Lift the handset to speak.
- Receiving a Call: When a call comes in, lift the handset to answer. Alternatively, press the Call Answer button on the handset (if available).
- Ending a Call: Place the handset back in its cradle or press the Call End button on the handset.
5.2. Using the Speaker Function
The integrated speaker allows for hands-free communication or audio playback.
- Speakerphone: During a call, you may switch to speakerphone mode via your smartphone's call interface or a dedicated button on the Hype device (if available).
- Audio Playback: Once paired, audio from your smartphone (music, podcasts, etc.) will play through the Hype Speaker.
5.3. Volume Control
Adjust the volume using the volume buttons on the Hype Bluetooth Speaker or directly from your connected smartphone.
6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the surface of the device. Do not use abrasive cleaners or solvents.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- Water Exposure: This device is not waterproof. Avoid exposure to water or excessive moisture.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on. | Low battery. | Charge the device fully. |
| Cannot pair with smartphone. | Device not in pairing mode; out of range; already paired with another device. | Ensure device is in pairing mode (flashing light). Move device closer to smartphone. Disconnect from other devices. Restart both devices. |
| No audio during calls/playback. | Volume too low; device not properly connected; incorrect audio output selected on smartphone. | Increase volume on both the Hype device and smartphone. Verify Bluetooth connection. Select Hype device as audio output on your smartphone. |
| Handset not working. | Handset not properly connected or charged. | Ensure handset is securely placed in its cradle and charged. Verify Bluetooth connection. |
8. Specifications
- Model: HY-101
- Brand: Hype
- Connectivity Technology: Wireless (Bluetooth)
- Product Type: Wireless Accessory
- Speaker Type: Soundbar
- Special Feature: Bass Boost
- Control Method: Touch
- Power Source: Battery Powered
- Product Dimensions: 9.3"D x 3.7"W x 8"H (23.6 cm D x 9.4 cm W x 20.3 cm H)
- Item Weight: 1.2 pounds (0.54 kg)
- Color: Blue (Note: Product image shows black, but specifications list blue as a color option)
- Waterproof: No
- UPC: 822248539032
- Manufacturer: JEG & SONS, INC.
9. Warranty and Support
For warranty information or technical support, please refer to the documentation provided at the time of purchase or contact the manufacturer directly. Keep your proof of purchase for warranty claims.
