Brady 93514 Vinyl Hazardous Material Label Instruction Manual

1. Product Overview

The Brady 93514 Vinyl Hazardous Material Label is designed to provide essential chemical information for hazardous materials, specifically for "Chromic Acid, Solid Chromium Anhydride." These black-on-yellow vinyl labels are crucial for workplace safety, ensuring that workers have immediate access to critical data regarding potential hazards and emergency actions. Each label measures 3 3/4 inches in height by 4 1/2 inches in width, and a standard package contains 25 labels.

This image displays the Brady 93514 Vinyl Hazardous Material Label. The label is yellow with black text, clearly indicating 'SOLID CHROMIUM ANHYDRIDE CHROMIC ACID' at the top. Below this, sections detail 'POTENTIAL HAZARDS' (including Fire or Explosion and Health Hazards), and 'EMERGENCY ACTION' (including Fire, Spill or Leak, and First Aid procedures). The label provides critical safety information for handling the specified hazardous materials.

2. Application Instructions (Setup)

The Brady 93514 label utilizes a flexible vinyl film with a cold temperature applicable pressure-sensitive adhesive (Brady B-928). For optimal adhesion and longevity, follow these steps:

1. Surface Preparation: Ensure the application surface is clean, dry, and free of dust, grease, or any contaminants. A clean, smooth surface is essential for proper adhesion.
2. Temperature: While the adhesive is cold temperature applicable, applying the label in a moderate temperature environment (above 50°F / 10°C) is generally recommended for initial bonding, if possible. The service temperature range for the label is -50°F to 176°F (-45°C to 80°C).
3. Peel and Apply: Carefully peel the label from its backing liner. Avoid touching the adhesive side to prevent contamination.
4. Placement: Position the label accurately on the desired surface. Once applied, repositioning may compromise the adhesive bond.
5. Smooth Out: Firmly press the label from the center outwards to remove any air bubbles and ensure full contact with the surface. Use a squeegee or a clean cloth for even pressure.

3. Usage Guidelines (Operating)

These labels are designed to convey critical safety information at a glance. Ensure they are placed in a highly visible location on containers or areas where "Chromic Acid, Solid Chromium Anhydride" is present. The label provides information on:

• Potential Hazards: Details regarding fire or explosion risks and health hazards associated with the material.
• Emergency Action: Instructions for fire response, spill or leak procedures, and first aid measures.

Regularly inspect labels to ensure they remain legible and securely attached, providing continuous safety information.

4. Care and Storage (Maintenance)

To maximize the lifespan and effectiveness of your Brady 93514 labels, consider the following care and storage recommendations:

• Cleaning: If the label surface becomes dirty, gently wipe it with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the print or vinyl material.
• Environmental Exposure: While designed for durability with an average outdoor durability of 2 years, prolonged exposure to harsh chemicals, extreme UV radiation, or physical abrasion can reduce its lifespan.
• Storage: Store unused labels in their original packaging in a cool, dry place, away from direct sunlight and extreme temperatures, to preserve the adhesive quality.

5. Troubleshooting

If you encounter issues with your Brady 93514 labels, consider these common troubleshooting tips:

• Label Not Adhering: Ensure the surface was properly cleaned and dry before application. Cold surfaces can sometimes affect initial tack; allow the label to warm slightly if applied in very cold conditions. Apply firm, even pressure across the entire label.
• Fading or Deterioration: While durable, extreme environmental conditions (e.g., prolonged direct sunlight, harsh chemical splashes) can accelerate wear. If fading occurs, replace the label promptly to maintain legibility of critical safety information.
• Bubbles Under Label: This usually indicates uneven application. When applying, press from the center outwards to push air to the edges. Small bubbles may dissipate over time, but large ones might require reapplication if they obscure text.

6. Specifications

7. Warranty and Support

Specific warranty information for the Brady 93514 Vinyl Hazardous Material Label is not provided within this document. For detailed warranty terms, technical support, or further inquiries, please contact Brady directly through their official website or customer service channels. Always refer to the manufacturer's official documentation for the most accurate and up-to-date information regarding product warranties and support services.