Optimus H-1322 Portable 2-Speed Fan Heater Instruction Manual

1. Introduction

This manual provides essential information for the safe and efficient operation of your Optimus H-1322 Portable 2-Speed Fan Heater. Please read all instructions carefully before use and retain this manual for future reference.

The Optimus H-1322 Portable Fan Heater is designed to provide supplemental warmth with user-friendly controls and integrated safety features. It includes an automatic thermostat, internal heat-limiting thermostat, thermal cut-off safety, and a tip-over safety switch. The unit offers two heat settings, a fan-only option, and a power indicator light.

Image 1.1: Front view of the Optimus H-1322 Portable Fan Heater, showing the fan grille and control knobs.

2. Important Safety Instructions

WARNING: To reduce the risk of fire, electric shock, or injury, observe the following safety precautions:

• Read all instructions before using this heater.
• This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Use handles when moving this heater. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 meters) from the front of the heater and keep them away from the sides and rear.
• Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended.
• Always unplug heater when not in use.
• Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged in any manner. Return heater to authorized service facility for examination, electrical or mechanical adjustment, or repair.
• Do not use outdoors.
• This heater is not intended for use in bathrooms, laundry areas, and similar indoor locations. Never locate heater where it may fall into a bathtub or other water container.
• Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic area and where it will not be tripped over.
• To disconnect heater, turn controls to OFF, then remove plug from outlet.
• Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
• To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
• A heater has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or flammable liquids are used or stored.
• Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
• Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip).
• This heater includes a Tip-Over Safety Switch which automatically shuts off the heater if it is accidentally tipped over.
• The heater is equipped with an Internal Heat Limiting Thermostat and a Thermal Cut-off Safety Device to prevent overheating.

Image 2.1: Illustration demonstrating the heater's tip-over safety feature, showing the unit automatically shutting off if tilted.

3. Product Features

• Two Heat Settings: Provides 750 watts (Low) and 1500 watts (High) for varied heating needs.
• Four-Position Function Switch: Controls Off, Fan-Only, Low Heat (750W), and High Heat (1500W) modes.
• Automatic Thermostat Control: Maintains desired room temperature.
• Fan-Only Setting: Allows for air circulation without heat.
• Internal Heat Limiting Thermostat: Prevents internal components from overheating.
• Thermal Cut-off Safety Device: Additional safety mechanism to prevent overheating.
• Tip-Over Safety Switch: Automatically shuts off the unit if it is accidentally knocked over.
• Power Indicator Light: Illuminates when the heater is operating.
• Portable Design: Compact and lightweight with an integrated handle for easy transport.

Image 3.1: Graphic highlighting key features of the H-1322 Portable Fan Heater, including heat settings, safety features, and dimensions.

4. Setup

1. Unpacking: Carefully remove the heater from its packaging. Retain the packaging for off-season storage.
2. Placement: Place the heater on a firm, level surface. Ensure it is at least 3 feet (0.9 meters) away from walls, furniture, and other combustible materials. Do not place the heater on soft surfaces like rugs or carpets that could block the air intake.
3. Power Connection: Ensure the heater is turned to the "OFF" position before plugging it into a 120V AC, 60Hz electrical outlet. Always plug the heater directly into a wall outlet. Do not use extension cords or power strips.

Image 4.1: The Optimus H-1322 heater positioned on the floor in a living room, demonstrating appropriate placement away from furniture.

5. Operating Instructions

The Optimus H-1322 features two control knobs: a Function Switch and a Thermostat Control.

5.1 Function Switch

This knob controls the operating mode of the heater. Rotate the knob to select your desired setting:

• O (OFF): Turns the heater completely off.
• Fan Icon (FAN): Activates the fan without heat, circulating ambient air.
• I (LOW): Provides 750 watts of heat.
• II (HIGH): Provides 1500 watts of heat.

Image 5.1: Detailed view of the function switch, showing the 'Off', 'Fan', 'Low Heat (I)', and 'High Heat (II)' settings.

5.2 Thermostat Control

This knob allows you to set and maintain a desired room temperature. The heater will cycle on and off to maintain the set temperature.

1. Turn the Function Switch to either "I" (LOW) or "II" (HIGH) heat setting.
2. Turn the Thermostat Control knob clockwise to the maximum setting.
3. When the room reaches your desired comfort level, slowly turn the Thermostat Control knob counter-clockwise until the heater turns off.
4. The heater will now automatically maintain this temperature, cycling on and off as needed.

Image 5.2: Detailed view of the thermostat control dial, indicating settings from minimum to maximum heat.

5.3 Power Indicator Light

A red indicator light on the front panel will illuminate when the heater is powered on and operating in any mode (Fan, Low, or High).

6. Maintenance

WARNING: Always unplug the heater before cleaning or performing any maintenance.

• Cleaning: Use a soft, damp cloth to clean the exterior surfaces of the heater. Do not use abrasive cleaners or solvents. Ensure no water enters the interior of the heater.
• Dust Removal: Periodically use a vacuum cleaner with a brush attachment to remove dust from the air intake and exhaust grilles.
• Storage: When not in use, store the heater in a cool, dry location. It is recommended to store it in its original packaging to protect it from dust and damage.
• Cord Care: Do not wrap the power cord tightly around the heater. Avoid placing heavy objects on the cord.

7. Troubleshooting

8. Specifications

• Model: H-1322
• Brand: Optimus
• Power: 750W / 1500W
• Voltage: 120V AC, 60Hz
• Dimensions (D x W x H): 9.25" x 10.5" x 5.5"
• Weight: Approximately 2 pounds
• Safety Features: Tip-Over Safety Switch, Internal Heat Limiting Thermostat, Thermal Cut-off Safety Device
• Color: White
• Indoor/Outdoor Usage: Indoor only
• Heating Coverage: 150-250 square feet (supplemental heat)

9. Warranty and Support

Optimus products are manufactured to high-quality standards. Specific warranty details are typically provided with the product at the time of purchase. Please refer to the warranty card or documentation included in your product packaging for information regarding warranty coverage, terms, and conditions.

For technical support, service, or questions regarding your Optimus H-1322 Portable 2-Speed Fan Heater, please contact Optimus customer service. Contact information can usually be found on the product packaging or the manufacturer's official website.

When contacting support, please have your model number (H-1322) and purchase information readily available.