Product Overview
The Mevotech Supreme Tie Rod End MS50728 is an automotive replacement component designed for vehicle steering systems. This product is engineered for durability and ease of installation, featuring specific design elements to enhance performance and longevity.
- Enhanced Fastener Security: Features pre-applied nylok thread adhesive to secure fasteners and resist vibration.
- Simplified Installation: Includes additional hardware to streamline the installation process.
- Precision Engineering: Designed with innovations for high durability and straightforward installation.
- Premium Construction: Utilizes high-quality materials for all components to ensure an extended part life.
- Rigorous Quality Assurance: Undergoes extensive in-house and third-party durability testing to confirm optimal performance and strength.
Image: Mevotech Supreme Tie Rod End, highlighting its engineering for durability and ease of installation.
Safety Information
Automotive repair and part replacement should only be performed by qualified professionals. Improper installation can lead to vehicle malfunction, serious injury, or death. Always refer to your vehicle's service manual for specific procedures and torque specifications. Wear appropriate personal protective equipment (PPE) during installation.
Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Setup and Installation
The Mevotech Supreme Tie Rod End MS50728 is designed for a direct fit replacement. Professional installation is highly recommended to ensure proper alignment and vehicle safety.
- Preparation: Safely lift and support the vehicle according to manufacturer guidelines. Remove the wheel and access the existing tie rod end.
- Removal of Old Part: Disconnect the old tie rod end from the steering knuckle and the inner tie rod. Note the number of turns required to remove the old tie rod end from the inner tie rod for initial alignment reference.
- Installation of New Part: Thread the new Mevotech MS50728 tie rod end onto the inner tie rod, matching the number of turns noted during removal. Connect the tie rod end to the steering knuckle. Ensure all fasteners are tightened to the vehicle manufacturer's specified torque values. The tie rod end features pre-applied dry thread locking compound on the threads for enhanced security.
- Final Steps: Reinstall the wheel and lower the vehicle. It is critical to perform a professional wheel alignment immediately after replacing any steering components to prevent premature tire wear and ensure safe vehicle operation.
Image: Exploded view illustrating key features of the Mevotech Tie Rod End, including pre-applied thread locking compound, wrench flats for easier installation, boot clamps, anti-corrosion protection, and included labor saver hardware.
Image: Detail of the tie rod end threads, showing the pre-applied nylok thread adhesive for secure fastening.
Image: The Mevotech Tie Rod End, accompanied by the necessary nut and clamp for installation.
Function and Operation
The tie rod end is a critical component of a vehicle's steering and suspension system. It connects the steering rack or steering box to the steering knuckle, allowing the wheels to turn in response to steering wheel input. The Mevotech Supreme Tie Rod End MS50728 facilitates precise steering control and contributes to the overall stability and handling of the vehicle. Its robust design ensures reliable performance under various driving conditions.
Maintenance
Tie rod ends are wear items and should be inspected periodically as part of routine vehicle maintenance. Look for signs of wear such as:
- Loose steering or excessive play in the steering wheel.
- Unusual noises (clunking, popping) when turning or going over bumps.
- Uneven tire wear.
- Damaged or torn dust boots, which can lead to contamination and premature wear of the joint.
If any of these symptoms are observed, have the tie rod ends inspected by a qualified technician. The Mevotech Supreme Tie Rod End MS50728 is designed with long-lasting anti-corrosion protection to extend its service life.
Troubleshooting
If you experience issues after installation or during vehicle operation, consider the following common troubleshooting steps:
- Steering Play/Looseness: Re-check all fasteners for proper torque. Ensure the tie rod end is correctly seated in the steering knuckle. A professional wheel alignment is crucial after installation.
- Noise (Clunking/Popping): Inspect for any loose components or interference with other parts. Verify that the tie rod end is not binding.
- Uneven Tire Wear: This is often a symptom of improper wheel alignment. Ensure a professional alignment has been performed.
- Difficulty Steering: Check for proper installation and ensure no components are binding.
For persistent issues, consult a certified automotive technician.
Specifications
| Attribute | Detail |
|---|---|
| Brand | Mevotech |
| Model Number | MS50728 |
| Item Weight | 1.4 pounds |
| Product Dimensions | 14.2 x 1.5 x 1.5 inches |
| Material | Brass (for certain components, overall construction is steel/metal) |
| Color | Black |
| Connector Type | Tie Rod |
| Manufacturer Part Number | MS50728 |
| UPC | 669719127233 |
Warranty Information
For detailed warranty information regarding the Mevotech Supreme Tie Rod End MS50728, please refer to the official Mevotech website or contact their customer service directly. Warranty terms and conditions may vary.
Customer Support
If you have any questions, require technical assistance, or need further support regarding your Mevotech Supreme Tie Rod End MS50728, please visit the official Mevotech website or contact their customer support department. Contact information can typically be found on their website.
Mevotech Official Website: www.mevotech.com