1. Important Safety Information
Please read this entire manual before installation and assembly. If you have any questions regarding any of the instructions or warnings, please contact your local distributor for assistance. SpeaKa Professional is not liable for damage or injury caused by incorrect assembly or use.
- Weight Capacity: Do not exceed the maximum load capacity of 55 kg (121 lbs). Exceeding this weight can result in serious injury or property damage.
- Screen Size: This mount is designed for televisions between 32 and 65 inches (81.3 cm - 165.1 cm).
- Wall Type: The wall mount must be installed on solid concrete walls, brick walls, or solid wood stud walls. Do not install on drywall alone.
- Tools: Always use appropriate tools and follow safety guidelines when drilling or handling heavy objects.
- Children: Keep children away from the installation area. Small parts may be a choking hazard.
2. Package Contents
Verify that all components are included and undamaged. If any parts are missing or damaged, contact your supplier.
Image: The hardware kit includes various screws, washers, wall anchors, spacers, and an Allen key for assembly.
- Wall Plate Assembly (1 piece)
- TV Brackets (2 pieces)
- Mounting Hardware Kit (screws, washers, anchors, spacers, Allen key)
3. Installation Guide
3.1 Pre-Installation Checks
- Ensure your TV's VESA mounting pattern is compatible (up to 400x400mm).
- Confirm your TV's weight does not exceed 55 kg.
- Identify the suitable location on your wall, ensuring it can support the weight of the mount and TV.
3.2 Wall Plate Installation
- Position the wall plate on the desired location on the wall. Use the integrated spirit level to ensure it is perfectly horizontal. Mark the drilling holes.
- Drill pilot holes at the marked locations. The size of the drill bit will depend on your wall type and the anchors provided.
- Insert wall anchors (if required for your wall type).
- Secure the wall plate to the wall using the appropriate screws and washers. Ensure it is firmly attached.
Image: Rear view of the TV wall mount in its collapsed position, showing the wall plate and articulated arms.
3.3 Attaching TV Brackets
- Carefully place your TV face down on a soft, clean surface.
- Identify the VESA mounting holes on the back of your TV.
- Select the correct screws, washers, and spacers from the hardware kit that fit your TV's mounting holes.
- Attach the two TV brackets to the back of your TV, ensuring they are securely fastened and evenly spaced.
3.4 Mounting TV to Wall Plate
- With assistance, carefully lift the TV with the attached brackets.
- Hook the TV brackets onto the wall plate. Ensure both brackets are properly seated on the wall plate's hooks.
- Secure the TV to the wall plate using the safety screws or locking mechanisms provided on the brackets.
Image: A television mounted on the SpeaKa Professional wall mount in a living room setting, demonstrating its discreet appearance.
4. Operation
This wall mount offers both tilt and swivel functionality for optimal viewing angles.
4.1 Adjusting Tilt
- To adjust the vertical tilt, loosen the tilt adjustment knobs or bolts on the TV brackets.
- Carefully tilt the TV to your desired angle.
- Tighten the tilt adjustment knobs or bolts to secure the TV in position.
4.2 Adjusting Swivel and Extension
- To swivel the TV horizontally or extend it from the wall, gently pull or push the TV. The articulated arms allow for smooth movement.
- The mount allows for a minimum wall distance of 8 cm and a maximum extension of 54.5 cm.
Image: The SpeaKa Professional TV wall mount fully extended, demonstrating its telescopic and swivel capabilities.
5. Maintenance
- Cleaning: Wipe the mount with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Periodic Checks: Periodically check that all screws and connections are tight and secure. If any components appear loose or damaged, tighten or replace them as necessary.
6. Troubleshooting
- TV is not level: Use the integrated spirit level during installation to ensure the wall plate is perfectly horizontal. Some mounts may have fine-tuning adjustments for leveling the TV after installation. If not, re-adjust the wall plate.
- Difficulty adjusting movement (stiff): The mount is designed to be stable. If movement is too stiff, check for any overtightened bolts on the articulating arms. Do not lubricate with oil, as this can attract dust.
- Missing parts: Refer to the 'Package Contents' section. If parts are missing, contact your retailer or SpeaKa Professional support.
7. Specifications
| Feature | Specification |
|---|---|
| Model Number | SP-3959720 |
| Brand | SpeaKa Professional |
| Compatible Screen Sizes | 32 - 65 inches (81.3 cm - 165.1 cm) |
| Maximum Load Capacity | 55 kg |
| VESA Compatibility | Up to 400 x 400 mm |
| Mount Type | Wall Mount |
| Movement Type | Inclinable, Pivotable |
| Material | Alloy Steel |
| Color | Black |
| Wall Distance (Min) | 8 cm |
| Wall Distance (Max) | 54.5 cm |
8. Warranty and Support
SpeaKa Professional provides a 1-year availability for spare parts for this product. For technical support or warranty claims, please contact your point of purchase or visit the official SpeaKa Professional website for contact information.
