1. Product Overview
Ecolab Eco-San is an ultra-concentrated, chlorinated liquid sanitizer designed for commercial applications. This 1-gallon bottle provides a powerful solution for maintaining hygiene in various settings, including restaurants, hotels, hospitals, and schools. Its formulation ensures effective sanitization without leaving residue on surfaces.

Image 1.1: Front view of the Ecolab Eco-San 1 Gallon bottle, showing product label and branding.
Key Features:
- Ultra Concentrated: High concentration of chlorinating agent (eight percent available chlorine) for effective sanitization.
- Versatile Application: Suitable for use in low-temperature warewashing machines and various commercial environments.
- Residue-Free: Formulated to not leave residue on treated surfaces.
- Automatic Dispensing Compatible: Ideal for use with automatic dispensing systems for safer, more sanitary, and accurate measurement.
- Effective Stain Removal: Efficiently removes food stains from dishware, coffee, and tea on china.
- Clear and Free Rinsing: Aqueous solution ensures ease of use and clean rinsing.
2. Important Safety Information
WARNING: For external use only. Keep out of reach of children. Read and understand all safety data sheets (SDS) before use.
Ingredients:
- Active Ingredient: Sodium Hypochlorite
- Inactive Ingredients: Hypoallergenic ingredients
Handling and Storage:
- Store in a cool, dry area, away from direct sunlight and heat to avoid deterioration.
- Do not contaminate water, food, or feed by storage or disposal.
- Keep container tightly closed when not in use.
- Avoid contact with eyes, skin, and clothing. In case of contact, rinse immediately with plenty of water.
- Use appropriate personal protective equipment (PPE) such as gloves and eye protection when handling the concentrated product.
First Aid:
- If swallowed: Call a poison control center or doctor immediately. Do not induce vomiting.
- If on skin or clothing: Take off contaminated clothing. Rinse skin immediately with plenty of water for 15-20 minutes.
- If in eyes: Hold eye open and rinse slowly and gently with water for 15-20 minutes. Remove contact lenses, if present, after the first 5 minutes, then continue rinsing eye. Call a poison control center or doctor for treatment advice.
- If inhaled: Move person to fresh air. If person is not breathing, call 911 or an ambulance, then give artificial respiration, preferably mouth-to-mouth if possible. Call a poison control center or doctor for further treatment advice.
3. Setup and Dispensing
Ecolab Eco-San is designed for use with automatic dispensing systems, particularly in low-temperature warewashing machines. Proper setup ensures accurate dilution and effective sanitization.
Automatic Dispensing System Setup:
- Connect to Dispenser: Ensure the Eco-San 1 Gallon bottle is securely connected to a compatible automatic dispensing system.
- Water Temperature: For low-temperature warewashing machines, inject Eco-San into the final rinse water at a temperature of 100 ppm available chlorine, not exceeding 200 ppm.
- Verify Concentration: Air dry. Following a suitable test kit, periodically test the rinse solution to ensure the concentration does not fall below 50 ppm. Adjust the dispensing accordingly. Consult your local specialist for technical assistance and further information on proper use in warewashing machines.
Video 3.1: Demonstration of a commercial dispensing package for sanitizers, illustrating how products are automatically diluted and dispensed into sinks.
Manual Dispensing (for general applications):
For general sanitization operations, prepared use solutions may be reused for sanitizing but must be re-used for other purposes such as cleaning.
- Dilution: Dilute Eco-San according to the specific application and desired concentration. Refer to the product label for precise dilution ratios.
- Mixing: Add the concentrated sanitizer to water. Always add product to water, not water to product, to minimize splashing.
- Application: Apply the diluted solution to surfaces to be sanitized. Ensure adequate contact time as specified by local health regulations or product label.
Video 3.2: Overview of an innovative packaging dosing system, demonstrating how to accurately measure and dispense concentrated cleaning chemicals.
4. Operating Instructions
For Low-Temperature Warewashing Machines:
- Ensure the warewashing machine is clean and free of food debris.
- Load dishware, coffee cups, tea cups, and other items into the machine.
- Initiate the wash cycle.
- During the final rinse cycle, the automatic dispensing system will inject Eco-San to achieve a sanitizing solution of 100 ppm available chlorine.
- Ensure the rinse water temperature is maintained as per machine specifications and local health codes.
- Allow items to air dry completely after the cycle.
For Manual Sanitization of Surfaces:
- Clean Surface: Before sanitizing, thoroughly clean the surface to remove all food particles and soil. Rinse the surface with potable water.
- Prepare Solution: Prepare the Eco-San solution according to the product label's dilution instructions for your specific application.
- Apply Solution: Apply the diluted sanitizing solution to the cleaned surface using a cloth, sponge, or spray bottle. Ensure the entire surface is thoroughly wetted.
- Contact Time: Allow the solution to remain on the surface for the recommended contact time, typically 1-2 minutes, or as specified by local health regulations.
- Air Dry: Allow the surface to air dry. No rinsing is required after sanitization unless specified by local regulations or for food contact surfaces where a potable water rinse is mandated.
5. Maintenance and Testing
Regular testing of the sanitizing solution is crucial to ensure its effectiveness. Maintain proper concentration levels for optimal hygiene.
Sanitizer Concentration Testing:
- Obtain Test Kit: Use a suitable chlorine test kit (e.g., test strips) to measure the concentration of available chlorine in the sanitizing solution.
- Collect Sample: Collect a sample of the sanitizing solution from the final rinse cycle or the prepared manual solution.
- Perform Test: Follow the test kit instructions to dip the test strip into the solution.
- Read Results: Compare the color of the test strip to the color chart provided with the kit. The concentration should be within the recommended range (e.g., 50-200 ppm available chlorine for warewashing).
- Adjust if Necessary: If the concentration is too low, adjust the dispensing system or add more concentrated Eco-San to the manual solution. If too high, dilute with water.
Dispenser Maintenance:
- Periodically inspect the automatic dispensing system for clogs, leaks, or malfunctions.
- Clean the dispenser nozzles and tubing as needed to prevent buildup.
- Ensure the Eco-San bottle is replaced promptly when empty to maintain continuous sanitization.
6. Troubleshooting
Low Sanitizer Concentration:
- Check Dispenser: Verify that the automatic dispensing system is functioning correctly and not clogged.
- Product Level: Ensure the Eco-San bottle is not empty.
- Dilution Ratio: For manual solutions, re-check the dilution ratio and ensure accurate measurement.
- Water Flow: Confirm adequate water flow through the dispensing system.
No Sanitizer Dispensing:
- Bottle Connection: Ensure the Eco-San bottle is correctly connected to the dispenser.
- Dispenser Malfunction: Inspect the dispenser for any mechanical issues. Contact a service technician if necessary.
- Clogs: Check for any blockages in the dispenser tubing or nozzle.
Residue on Surfaces:
- Pre-Cleaning: Ensure surfaces are thoroughly cleaned and rinsed before sanitization.
- Excessive Concentration: Verify that the sanitizer solution is not over-concentrated. Adjust dilution if needed.
- Rinsing: For food contact surfaces, ensure a final potable water rinse is performed if required by local regulations.
7. Product Specifications
| Specification | Detail |
|---|---|
| Brand | Ecolab |
| Model | Eco-San 1 Gallon |
| Product Type | Commercial-Strength Chlorinated Liquid Sanitizer |
| Volume | 1 Gallon (128.0 Fluid Ounces) |
| Active Ingredient | Sodium Hypochlorite (8% available chlorine) |
| Formulation | Ultra Concentrated Liquid |
| Applications | Low-temperature warewashing machines, general surface sanitization in restaurants, hotels, hospitals, schools. |
| Features | Clear and free rinsing, aqueous solution, minimal excess alkalinity, ideal for automatic dispensing, effective on food stains. |
| Package Dimensions | 11.81 x 7.56 x 7.48 inches |
| Item Weight | 10.3 pounds |
8. Disposal
Do not reuse empty container. Do not rinse or refill this container. Triple rinse as follows: Empty the remaining contents into application equipment or a mix tank. Fill the container 1/4 full with water. Replace and tighten closures. Tip container on its side and roll it back and forth, ensuring at least one complete revolution, for 30 seconds. Pour rinsate into application equipment or a mix tank or store rinsate for later use or disposal. Repeat procedure two more times. Then offer for recycling or reconditioning, or puncture and dispose of in a sanitary landfill, or by incineration.
Improper disposal of excess pesticide, spray mixture, or rinsate is a violation of Federal Law. If these wastes cannot be disposed of by use according to label instructions, contact your State Pesticide or Environmental Control Agency, or the Hazardous Waste representative at the nearest EPA Regional Office for guidance.
9. Warranty and Support
For specific warranty information or technical support regarding Ecolab Eco-San Commercial-Strength Chlorinated Liquid Sanitizer, please refer to the official Ecolab website or contact Ecolab customer service directly. Contact details can typically be found on the product label or the manufacturer's website.
For further assistance, please visit the Ecolab Store on Amazon.