AmScope SM-1TSW2-L6W-10M

Download PDF
Contents

AmScope SM-1TSW2-L6W-10M Digital Trinocular Stereo Zoom Microscope User Manual

Model: SM-1TSW2-L6W-10M

1. Introduction

This manual provides comprehensive instructions for the assembly, operation, maintenance, and troubleshooting of your AmScope SM-1TSW2-L6W-10M Digital Professional Trinocular Stereo Zoom Microscope. This instrument is designed for detailed inspection and manipulation of large-scale specimens, offering a wide magnification range and digital imaging capabilities. Please read this manual thoroughly before using the microscope to ensure proper function and longevity.

2. Product Overview and Components

The AmScope SM-1TSW2-L6W-10M is a versatile digital stereo zoom microscope featuring a trinocular viewing head, a 0.7x-4.5x zoom objective, and a 10MP digital camera. It includes both 10x and 25x super-widefield high-eyepoint eyepieces, along with 0.5x and 2.0x Barlow lenses to extend the magnification range. Illumination is provided by a 6W dual-gooseneck LED light with adjustable intensity. The microscope is mounted on a stable pillar stand.

Key Components:

  • Trinocular Viewing Head: Allows for simultaneous visual observation and digital imaging.
  • Eyepieces: WH10x/20mm and WH25x/9mm super-widefield high-eyepoint eyepieces.
  • Zoom Objective: 0.7x-4.5x continuous zoom objective.
  • Barlow Lenses: 0.5x and 2.0x auxiliary lenses for magnification adjustment.
  • Pillar Stand: Provides a stable base and adjustable height for the microscope head.
  • Dual-Gooseneck LED Illuminator: 6W LED light with two flexible goosenecks and intensity control.
  • 10MP Digital Camera: CMOS color sensor with reduction lens and USB 2.0 output for computer connectivity.
Front view of the AmScope SM-1TSW2-L6W-10M Digital Trinocular Stereo Zoom Microscope

Figure 2.1: Front view of the AmScope SM-1TSW2-L6W-10M Digital Trinocular Stereo Zoom Microscope, showing the trinocular head, eyepieces, objective, and pillar stand.

Side view of the AmScope SM-1TSW2-L6W-10M Digital Trinocular Stereo Zoom Microscope with LED light unit

Figure 2.2: Side view of the microscope, illustrating the focus knobs, zoom control, and the connected dual-gooseneck LED light unit.

AmScope 6W Dual-Gooseneck LED Spot Light Illuminator

Figure 2.3: The 6W dual-gooseneck LED spot light illuminator, featuring individual brightness controls for each light.

3. Setup Instructions

Follow these steps to assemble and prepare your microscope for use.

  1. Unpacking: Carefully remove all components from the packaging. Verify that all parts listed in the packing list are present and undamaged.
  2. Mounting the Microscope Head: Loosen the set screw on the pillar stand's microscope head holder. Slide the trinocular viewing head onto the pillar until it rests securely. Tighten the set screw to secure the head in place.
  3. Inserting Eyepieces: Remove the dust caps from the eyepiece tubes on the trinocular head. Insert the desired eyepieces (WH10x or WH25x) into the tubes.
  4. Attaching Barlow Lenses (Optional): If additional magnification or working distance adjustment is required, screw the 0.5x or 2.0x Barlow lens onto the bottom of the main objective housing.
  5. Connecting the LED Illuminator: Connect the dual-gooseneck LED light unit to a power source. Insert the gooseneck light cables into the designated ports on the illuminator unit. Position the goosenecks to direct light onto the stage area.
  6. Connecting the Digital Camera: Insert the 10MP digital camera into the vertical trinocular port. Secure it with the provided set screw. Connect the camera to your computer using the supplied USB 2.0 cable.
  7. Software Installation: Install the image capture and editing software provided with the camera onto your computer. Follow the on-screen instructions for installation.
  8. Power Connection: Connect the microscope's power cord (if applicable) and the LED illuminator's power cord to appropriate electrical outlets.

4. Operating Instructions

This section details the steps for operating your AmScope microscope.

4.1 Powering On and Illumination

  • Turn on the power switch for the LED illuminator.
  • Adjust the brightness of each gooseneck LED light using the rheostat controls on the illuminator unit. Position the goosenecks to achieve even and optimal illumination of your specimen.

4.2 Placing a Specimen

  • Place your specimen on the stage plate. Use the large stage clips to secure it if necessary. The reversible black and white stage plate can be used to provide contrast for light- or dark-colored specimens.

4.3 Adjusting Magnification and Focus

  • Interpupillary Distance: While looking through the eyepieces, adjust the distance between the two eyepiece tubes until you see a single, clear circular field of view.
  • Dioptric Adjustment: If you wear glasses or have different vision in each eye, use the diopter adjustment ring on one eyepiece to fine-tune focus for that eye after focusing with the main focus knob.
  • Zoom Magnification: Rotate the zoom objective knob (0.7x-4.5x) to change the magnification continuously. The overall magnification range is 3.5x-225x, depending on the eyepieces and Barlow lenses used.
  • Focusing: Use the coarse and fine focus knobs on the side of the microscope head to bring the specimen into sharp focus.

4.4 Using the Digital Camera

  • Launch the installed image capture software on your computer.
  • The software will display a live feed from the 10MP camera.
  • Use the software interface to capture still images, record videos, and perform basic image editing. Refer to the camera software's specific user guide for detailed instructions on its features.

4.5 Viewing Head Rotation

  • The trinocular viewing head can be rotated 360 degrees to facilitate sharing observations with others without moving the entire microscope.

5. Maintenance

Proper maintenance ensures the longevity and optimal performance of your microscope.

  • Cleaning Lenses: Use only specialized lens cleaning fluid and lens paper or a soft, lint-free cloth to clean optical surfaces. Avoid touching lenses with bare fingers.
  • General Cleaning: Wipe the microscope body with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
  • Dust Protection: Always cover the microscope with a dust cover when not in use to prevent dust accumulation on optical and mechanical parts.
  • Storage: Store the microscope in a dry, dust-free environment. Avoid extreme temperatures and humidity.
  • Handling: Handle the microscope with care. Avoid sudden impacts or vibrations.

6. Troubleshooting

This section addresses common issues you might encounter.

ProblemPossible CauseSolution
No image visible through eyepiecesDust caps on eyepieces or objective; objective not aligned; specimen not illuminated.Remove dust caps; rotate objective to click into place; turn on LED illuminator and adjust brightness.
Image is blurry or out of focusIncorrect focus adjustment; diopter not adjusted; dirty lenses.Adjust coarse and fine focus knobs; adjust diopter on eyepiece; clean lenses with lens paper and fluid.
LED light not workingPower cord disconnected; power switch off; brightness set to minimum.Check power connections; ensure power switch is ON; increase brightness using rheostat.
Camera not detected by computerUSB cable disconnected; camera not properly seated; software not installed or running.Ensure USB cable is securely connected; reseat camera in trinocular port; install/reinstall camera software and launch it.
Shadows appear in camera imageUneven illumination from LED lights.Adjust the position and angle of the dual-gooseneck LED lights to provide more even illumination.

7. Specifications

Detailed technical specifications for the AmScope SM-1TSW2-L6W-10M microscope.

FeatureSpecification
Model NumberSM-1TSW2-L6W-10M
Magnification Range3.5X - 225X (with included eyepieces and Barlow lenses)
EyepiecesWH10x/20mm (Super-Widefield, High-Eyepoint), WH25x/9mm (Super-Widefield, High-Eyepoint)
Zoom Objective0.7X - 4.5X
Barlow Lenses0.5X, 2.0X
Viewing HeadTrinocular, 45-degree inclination, 360-degree rotatable
Interpupillary Distance55 - 75 mm
Illumination6W Dual-Gooseneck LED Light with Rheostat Control
Digital Camera10MP CMOS Sensor, USB 2.0 Output, 0.5X Reduction Lens, Image Capture Software
Stand TypePillar Stand with Reversible Black/White Stage Plate
MaterialMetal
Product Dimensions55.88 x 40.64 x 45.72 cm
Item Weight1.47 kg
Power SourceCorded Electric (5 volts)
Compatible DevicesPersonal Computer, Laptop

8. Warranty and Support

AmScope products are manufactured to high-quality standards. For specific warranty information regarding your SM-1TSW2-L6W-10M microscope, please refer to the warranty card included with your product or visit the official AmScope website. For technical support, replacement parts, or service inquiries, please contact AmScope customer service directly through their official channels.

Manufacturer: United Scope LLC.

© 2023 AmScope. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.