Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of the Dometic Atwood 91959 Switch Pack. Please read this manual thoroughly before use to ensure proper function and safety.
Image: The Atwood 91959 Switch Pack, a rectangular black switch with "ATWOOD" printed at the top, "OFF" on the left, and "ON" on the right. It features a red indicator light and a push-button actuator.
Safety Information
Warning: Product may contain materials cautioned by California Proposition 65. For more information, please refer to the official California Proposition 65 warnings.
Always disconnect power before installing or servicing electrical components. Ensure all connections are secure and comply with local electrical codes. If you are unsure about any installation steps, consult a qualified technician.
Package Contents
- Atwood Mobile Products 91959 Direct Ignition Switch (1 unit)
Specifications
| Feature | Detail |
|---|---|
| Model | 91959 |
| Brand | Dometic (Manufactured by Atwood Mobile Products) |
| Operation Mode | ON-OFF |
| Contact Type | Normally Open |
| Connector Type | RJ-45 |
| Terminal | Physical |
| Item Dimensions (L x W x H) | 3.4 x 2.2 x 1.7 inches |
| Circuit Type | 1-way |
| Actuator Type | Push Button |
| Contact Material | Metal |
| International Protection Rating | IP00 |
| Item Weight | 0.8 ounces |
| Country of Origin | China |
Setup and Installation
The Atwood 91959 Switch Pack is designed for direct ignition applications, commonly found in RV water heaters. Installation should be performed by individuals with appropriate electrical knowledge.
- Power Disconnection: Before beginning any installation, ensure that all power to the appliance or circuit where the switch will be installed is completely disconnected. This is a critical safety step.
- Locate Mounting Position: Identify the appropriate mounting location for the switch. This is typically an existing cutout or a designated panel area.
- Wiring Connections: Connect the existing wiring to the terminals on the back of the 91959 Switch Pack. Refer to the appliance's specific wiring diagram for correct terminal assignments. The switch features a Normally Open contact type and RJ-45 connector type. Ensure secure connections.
- Mounting the Switch: Secure the switch into its mounting position using appropriate fasteners (not included). Ensure it is firmly seated and does not wobble.
- Verify Installation: Double-check all wiring connections for correctness and security. Ensure no bare wires are exposed.
- Restore Power: Once installation is complete and verified, carefully restore power to the circuit.
Operating Instructions
The Atwood 91959 Switch Pack operates as a simple ON-OFF push-button switch.
- To Turn ON: Press the side of the switch marked "ON". The red indicator light will illuminate, indicating that the circuit is active and the appliance (e.g., water heater) is attempting to ignite or is operating.
- To Turn OFF: Press the side of the switch marked "OFF". The red indicator light will turn off, indicating that the circuit is de-energized and the appliance is off.
- Indicator Light: The red light serves as a visual confirmation of the switch's active state. For direct ignition systems, it typically stays on until successful ignition, then turns off.
Maintenance
The Atwood 91959 Switch Pack requires minimal maintenance.
- Cleaning: Periodically wipe the surface of the switch with a soft, dry cloth to remove dust and grime. Do not use abrasive cleaners or solvents.
- Inspection: Regularly inspect the switch and its wiring for any signs of wear, damage, or loose connections. Address any issues promptly.
- Environmental Conditions: The switch has an IP00 rating, meaning it is not protected against ingress of solid objects or water. Ensure it is installed in a protected environment, away from direct exposure to moisture or excessive dust.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Switch does not turn ON/OFF | No power to the circuit; Loose wiring connection; Faulty switch. | Check power supply; Inspect and secure all wiring; Replace the switch if faulty. |
| Indicator light does not illuminate | No power; Faulty indicator light; Issue with the appliance it controls. | Verify power; Check switch functionality; Consult appliance manual. |
| Switch feels loose after installation | Improper mounting; Fasteners not secure. | Ensure switch is correctly seated; Tighten mounting fasteners. |
Warranty Information
For specific warranty details regarding the Atwood 91959 Switch Pack, please refer to the official warranty documentation provided by Dometic or Atwood Mobile Products at the time of purchase. Warranty terms typically cover manufacturing defects for a specified period.
Customer Support
If you require further assistance, technical support, or have questions not covered in this manual, please contact Dometic customer service or visit their official website. Have your product model number (91959) ready when contacting support.
You can find more information on the Dometic Store on Amazon.