Introduction
This user manual provides essential information for the safe and effective use of your CALEX 220-240V 60W 530 Lumen E14 300°C Oven Lamp. Please read this manual thoroughly before installation and retain it for future reference.
This special heat-resistant standard light bulb is designed specifically for use in ovens, capable of withstanding temperatures up to 300°C. It features an E14 Edison screw base and provides 530 lumens of light at a warm color temperature of 2700K.
Important Safety Information
Always follow these safety precautions to prevent injury or damage:
- Electrical Hazard: Ensure the oven is completely disconnected from the power supply before attempting installation, removal, or maintenance of the lamp.
- High Temperature: The lamp and oven surfaces can reach extremely high temperatures. Allow the oven and lamp to cool down completely before handling.
- Fragile Material: The lamp is made of glass. Handle with care to prevent breakage. Do not apply excessive force.
- Correct Application: This lamp is designed for oven use only. Do not use it in other fixtures or environments unless specified.
- Wattage Matching: Ensure the replacement lamp's wattage matches the oven's specified maximum wattage to prevent overheating or damage. This lamp is 60W.
- Disposal: Dispose of broken or old lamps according to local regulations.
Product Overview
The CALEX Oven Lamp is a specialized incandescent bulb designed for high-temperature environments. It features a clear glass finish and an E14 screw base.
Image: The CALEX 60W E14 Oven Lamp shown alongside its product packaging, highlighting its design and intended use.
Image: A detailed view of the CALEX 60W E14 Oven Lamp, showcasing its clear glass bulb and E14 screw base.
Installation
- Disconnect Power: Before beginning, ensure the oven is completely unplugged from the power outlet or the circuit breaker is switched off to prevent electric shock.
- Allow Cooling: If the oven has been in use, allow it to cool down completely to avoid burns from hot surfaces or the existing lamp.
- Locate Lamp Housing: Identify the lamp housing inside your oven. It may be covered by a protective glass cover.
- Remove Protective Cover (if applicable): Carefully remove any protective glass cover by unscrewing or unlatching it. Refer to your oven's specific manual for instructions on removing the lamp cover.
- Remove Old Lamp: Gently unscrew the old lamp counter-clockwise from its E14 base. If the lamp is broken, use pliers or a potato to grip and turn the base, ensuring no glass fragments remain.
- Install New Lamp: Carefully screw the new CALEX 220-240V 60W 530 Lumen E14 300°C Oven Lamp clockwise into the E14 socket until it is finger-tight. Do not overtighten.
- Replace Protective Cover (if applicable): Reattach the protective glass cover securely.
- Restore Power: Plug the oven back into the power outlet or switch the circuit breaker back on.
- Test: Turn on the oven light to confirm the new lamp is functioning correctly.
Operation
The CALEX Oven Lamp operates automatically when the oven light function is activated. Simply turn on your oven's interior light switch to illuminate the oven cavity. The lamp is designed for continuous use within the oven's operating temperature range up to 300°C.
Maintenance
The CALEX Oven Lamp requires minimal maintenance. Follow these guidelines:
- Cleaning: If the lamp or its protective cover becomes dirty, ensure the oven is cool and disconnected from power. Wipe the glass surfaces with a soft, damp cloth. Do not use abrasive cleaners or harsh chemicals.
- Replacement: Replace the lamp when it burns out. Follow the "Installation" steps for safe replacement. Always use a lamp with the correct wattage and temperature rating for your oven.
- Inspection: Periodically inspect the lamp and its socket for any signs of damage or wear.
Troubleshooting
If your oven lamp is not working, consider the following:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not light up. | Lamp is burnt out. | Replace the lamp following the installation instructions. |
| No power to the oven. | Check if the oven is plugged in and the circuit breaker is on. | |
| Lamp not screwed in properly. | Ensure the lamp is securely screwed into the socket. | |
| Lamp flickers. | Loose connection. | Ensure the lamp is securely screwed in. If flickering persists, the lamp may be faulty and require replacement. |
If troubleshooting steps do not resolve the issue, consult a qualified electrician or your oven's manufacturer for further assistance.
Specifications
- Brand: CALEX
- Model: B00A2392HW
- Voltage: 220-240V
- Wattage: 60W
- Lumen Output: 530 Lumen
- Base Type: E14 (Edison Screw)
- Maximum Operating Temperature: 300°C
- Color Temperature: 2700K
- Warm-up time to 60% light: 0.1 s
- Finish: Clear Glass
- Included Components: 1 x Oven Lamp
Warranty and Support
For warranty information and customer support, please refer to the documentation provided at the time of purchase or visit the official CALEX website. Keep your proof of purchase for warranty claims.
For general inquiries or technical assistance, you may also contact your retailer.