AmScope SM-1TS-144S-8M Digital Professional Trinocular Stereo Zoom Microscope User Manual

1. Introduction

The AmScope SM-1TS-144S-8M is a digital professional stereo zoom microscope designed for detailed inspection and analysis. It features a trinocular viewing head, 7x-45x magnification range, a 0.7x-4.5x zoom objective, and a pillar stand. This microscope is equipped with a 144-bulb LED ring light for illumination and an 8MP camera with a reduction lens and software for image capture and video streaming to a computer. Its long working distance makes it suitable for manipulating large specimens, such as circuit boards and dental appliances.

2. Safety Information

Please read and understand all safety instructions before operating the microscope.

• Electrical Safety: Ensure the power supply voltage matches the microscope's requirements (110V-240V). Always unplug the microscope before cleaning or performing maintenance. Do not operate with wet hands.
• Handling: Handle the microscope with care. Avoid sudden impacts or vibrations. Transport the unit by holding the main body and stand firmly.
• Environment: Use the microscope in a clean, dry, and dust-free environment. Avoid direct sunlight, high temperatures, and high humidity.
• Optical Components: Do not touch optical surfaces with bare hands. Use specialized lens cleaning materials for cleaning.
• Ventilation: Ensure adequate ventilation around the power supply and LED ring light to prevent overheating.
• Children: Keep the microscope out of reach of children or supervise them closely during use.

3. Package Contents

Verify that all components listed below are present in your package:

• AmScope SM-1TS-144S-8M Stereo Zoom Microscope with Pillar Stand
• WH10x20mm Eyepieces (30mm), one pair
• 0.7x-4.5x Zoom Objective
• 144-Bulb LED Ring Light with Power Supply (LED-144S)
• 8MP Digital Camera (MU800)
• 0.5x Reduction Lens
• USB 2.0 Cable
• Software CD
• Eye Guards, one pair
• Stage Clips, one pair
• Dust Cover

4. Setup and Assembly

4.1 Microscope Assembly

1. Attach the Microscope Head: Carefully place the trinocular microscope head onto the pillar stand. Secure it using the locking screw.
2. Install Eyepieces: Insert the WH10x20mm eyepieces into the two ocular tubes of the trinocular head. Place the eye guards over the eyepieces.
3. Install Zoom Objective: The 0.7x-4.5x zoom objective is typically pre-installed. Ensure it is securely fastened.
4. Attach Stage Plate and Clips: Place the reversible black and white stage plate onto the base. Secure specimens using the stage clips.

Image 4.1: Fully assembled AmScope SM-1TS-144S-8M Stereo Zoom Microscope.

4.2 LED Ring Light Installation

1. Slide the 144-bulb LED ring light onto the objective housing. Ensure it fits snugly.
2. Connect the ring light's power cable to its dedicated power supply, then plug the power supply into a suitable electrical outlet.

Image 4.2: Microscope with the LED ring light installed and illuminated.

4.3 Digital Camera Setup

1. Install Reduction Lens: Screw the 0.5x reduction lens onto the 8MP digital camera (MU800).
2. Mount Camera: Insert the camera with the reduction lens into the vertical trinocular port. Secure it with the set screw on the port. The trinocular port can also be used as a C-Mount.
3. Connect to Computer: Connect the camera to your computer using the provided USB 2.0 cable.
4. Install Software: Insert the Software CD into your computer's optical drive and follow the on-screen instructions to install the image capture and editing software and camera drivers. Drivers are compatible with Windows XP, Vista, 7, 8; Mac OS X; and Linux.

Image 4.3: Microscope with the 8MP digital camera installed on the trinocular port.

Image 4.4: Included 8MP digital camera, reduction lens, USB cable, and software CD.

5. Operating Instructions

5.1 Powering On and Illumination

• Ensure the LED ring light power supply is plugged into an electrical outlet.
• Turn on the LED ring light using the switch located on the light head.
• Adjust the brightness using the rheostat control dial on the ring light.

5.2 Viewing Through Eyepieces

1. Place a specimen on the stage plate and secure it with the stage clips if necessary.
2. Adjust the interpupillary distance by moving the eyepiece tubes closer or further apart until a single, clear circular field of view is observed.
3. Use the dioptric adjustment on one eyepiece to compensate for individual eye-strength differences, ensuring both eyes are in focus.
4. Rotate the zoom objective knob to change the magnification from 0.7x to 4.5x, providing a continuous zoom range of 7x-45x with the 10x eyepieces.
5. Use the coarse focus knobs on the side of the microscope head to bring the specimen into sharp focus.

5.3 Using the Digital Camera

1. Ensure the camera is properly installed and connected to your computer, and the software is running.
2. Open the image capture software on your computer. The live feed from the microscope camera should appear on your screen.
3. Adjust the microscope's focus and zoom while observing the computer screen to achieve the desired image.
4. Use the software to capture still images (JPG, TIF, GIF, PSD, WMF, BMP formats supported) or record live video. The camera provides 40x magnification on screen with the 0.5x reduction lens.
5. The software includes editing capabilities and measurement functions.

Image 5.1: Example of a circuit board viewed through the microscope camera.

Image 5.2: Example of a microchip viewed through the microscope camera.

6. Maintenance

• Cleaning Optical Components: Use a soft brush to remove dust from lenses. For smudges or fingerprints, use lens cleaning solution and lens paper. Apply solution to the paper, not directly to the lens.
• Cleaning Body: Wipe the microscope body with a soft, damp cloth. Avoid using organic solvents.
• Storage: When not in use, cover the microscope with the provided dust cover to protect it from dust and debris. Store in a cool, dry place.
• LED Ring Light: The 144-bulb LED ring light has a 100,000-hour lifespan and does not require bulb replacement under normal use.

7. Troubleshooting

8. Specifications

Microscope Specifications

Camera Specifications

9. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the documentation included with your purchase or visit the official AmScope website.

Manufacturer: United Scope LLC.
Brand: AmScope
Model Number: SM-1TS-144S-8M