1. Introduction
Thank you for choosing the Ferrari T150I Cavallino Collection In-Ear Headphones. This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your new audio device. Please read this manual thoroughly before using the headphones to ensure optimal performance and longevity.
2. Package Contents
Please verify that all items listed below are present in your product packaging:
- T150I Cavallino Collection In-Ear Headphones
- Ear Cushions (various sizes)
- Protective Case
3. Product Overview
Familiarize yourself with the components of your T150I In-Ear Headphones.
Figure 3.1: Overview of the T150I Cavallino In-Ear Headphones, displaying both earbuds connected by the tangle-free cable.
Figure 3.2: Detailed view of the left earbud, featuring the iconic Ferrari Prancing Horse emblem on its outer casing.
Figure 3.3: Close-up of the right earbud, highlighting its sleek design and the silicone ear tip for comfortable fit.
Figure 3.4: View of the 3.5mm audio jack, the in-line remote control unit, and the cable splitter with Ferrari branding.
4. Setup
4.1 Choosing the Right Ear Cushions
The T150I headphones come with multiple sizes of ear cushions to ensure a comfortable and secure fit, as well as optimal sound isolation. Experiment with the different sizes to find the pair that best fits your ear canal. A good seal is crucial for bass response and noise reduction.
- Gently pull off the pre-installed ear cushions.
- Select a new pair of ear cushions that feel snug but not uncomfortable.
- Push the new ear cushions firmly onto the headphone nozzles until they are securely attached.
4.2 Connecting to Your Device
The T150I headphones feature a standard 3.5mm jack for universal compatibility.
- Locate the 3.5mm audio jack on your smartphone, tablet, MP3 player, or other audio device.
- Insert the 3.5mm connector of the headphones firmly into the device's audio jack.
- Ensure the connection is secure to prevent audio interruptions.
5. Operating Instructions
5.1 Audio Playback
Once connected, your headphones will play audio from your device. Adjust the volume directly on your connected device.
5.2 Using the In-Line Remote Control
The T150I headphones are equipped with an in-line remote control for convenient management of calls and music playback. Specific functions may vary slightly depending on your device's operating system (e.g., iOS, Android).
- Single Press: Play/Pause music, Answer/End call.
- Double Press: Skip to next track.
- Triple Press: Go to previous track.
- Press and Hold: Activate voice assistant (e.g., Siri, Google Assistant) or decline call.
6. Maintenance and Care
Proper care will extend the life and maintain the performance of your headphones.
- Cleaning: Use a soft, dry cloth to wipe the earbuds and cable. For ear cushions, they can be gently removed and cleaned with a mild soap solution, then rinsed and thoroughly dried before reattaching.
- Storage: When not in use, store your headphones in the provided protective case to prevent tangling and damage.
- Avoid Moisture: Do not expose the headphones to excessive moisture or liquids. If they get wet, dry them immediately.
- Cable Care: The cable is designed to be tangle-free. Avoid sharp bends or excessive pulling on the cable, especially near the connectors.
7. Troubleshooting
If you encounter issues with your headphones, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound or distorted sound | Loose connection, incorrect volume, damaged cable/jack, incorrect audio output setting on device. | Ensure 3.5mm jack is fully inserted. Increase volume on device. Test with another audio source/device. Inspect cable for damage. Check device's audio settings. |
| Earbuds fall out easily | Incorrect ear cushion size. | Try different sizes of ear cushions provided until a secure and comfortable fit is achieved. |
| Remote control not working | Incompatibility with device, loose connection. | Ensure the 3.5mm jack is fully inserted. Some remote functions may not be fully supported by all devices. |
8. Specifications
Key technical specifications for the T150I Cavallino Collection In-Ear Headphones:
- Model Name: Cavallino
- Item Model Number: AAV-1LFE014K
- Connectivity Technology: Wired
- Headphone Jack: 3.5 mm Jack
- Form Factor: In Ear
- Ear Placement: In Ear
- Control Type: Remote
- Cable Feature: Tangle Free
- Material: Plastic
- Colour: Black
- Item Weight: 54.4 g (0.12 Pounds)
- Product Dimensions: 15.06 x 4.01 x 10.03 cm
9. Warranty and Support
For information regarding warranty coverage, technical support, or service inquiries, please refer to the warranty card included with your purchase or visit the official Ferrari product support website. Keep your proof of purchase for any warranty claims.
Online Support: www.ferrari.com/en-EN/accessories (This is a placeholder link, please refer to actual product documentation for correct support URL.)
