1. Introduction
This manual provides essential information for the proper installation, operation, and maintenance of your Wells WS-54228 DPST Rocker Switch. Please read these instructions carefully before use to ensure safe and efficient functionality. Retain this manual for future reference.
2. Safety Information
WARNING: Risk of Electric Shock.
- Always disconnect power before installing, servicing, or removing the switch.
- Installation should be performed by a qualified electrician or technician in accordance with all local and national electrical codes.
- Do not operate the switch if it appears damaged.
- Ensure the switch is rated for the voltage and current of the circuit it will control.
3. Product Overview
The Wells WS-54228 is a Double Pole, Single Throw (DPST) rocker switch designed for panel mounting. It features a simple ON/OFF operation, controlling two independent circuits simultaneously. Its robust design is suitable for various industrial and scientific applications.
Figure 1: Wells WS-54228 DPST Rocker Switch. This image displays the front and side view of the switch, highlighting the 'ON' and 'OFF' labels on the rocker and the electrical terminals on the side.
4. Setup and Installation
This switch is designed for panel mounting. Follow these general steps for installation:
- Prepare Panel Opening: Create an appropriately sized rectangular opening in the mounting panel. The switch dimensions are approximately 0.87 x 1.5 inches.
- Disconnect Power: Ensure all power to the circuit is disconnected at the main breaker or fuse box before proceeding.
- Insert Switch: Carefully insert the switch into the prepared panel opening until it snaps or secures into place.
- Wire Connections: Connect the electrical wires to the terminals on the back of the switch. As a DPST switch, it typically has four terminals: two for input and two for output, controlling two separate circuits. Ensure correct polarity and secure connections. Refer to the specific wiring diagram for your application.
- Verify Installation: Double-check all connections and ensure the switch is securely mounted.
- Restore Power: Once installation is complete and verified, restore power to the circuit.
For complex installations or if you are unsure, consult a qualified professional.
5. Operating Instructions
The Wells WS-54228 Rocker Switch operates with a simple touch control method:
- To turn the connected device(s) ON, press the side of the rocker switch labeled 'ON'.
- To turn the connected device(s) OFF, press the side of the rocker switch labeled 'OFF'.
The switch will remain in the position it is set to until manually changed.
6. Maintenance
The Wells WS-54228 Rocker Switch requires minimal maintenance:
- Cleaning: Periodically wipe the surface of the switch with a soft, dry cloth to remove dust and debris. Do not use abrasive cleaners or solvents.
- Inspection: Regularly inspect the switch for any signs of physical damage, loose connections, or excessive wear. If any issues are observed, disconnect power and address them promptly.
- Environmental Conditions: Ensure the switch is operated within appropriate environmental conditions (temperature, humidity) as specified for its intended application.
7. Troubleshooting
If you encounter issues with your Wells WS-54228 Rocker Switch, consider the following:
- Switch Not Responding:
- Check if the power supply to the circuit is active.
- Verify all electrical connections are secure and correctly wired.
- Inspect the switch for visible damage.
- Intermittent Operation:
- Ensure connections are tight and free from corrosion.
- Confirm the switch is not exceeding its rated electrical load.
If problems persist after performing these checks, it may indicate a faulty switch or an issue with the connected circuit. Consult a qualified technician.
8. Specifications
| Feature | Specification |
|---|---|
| Brand | Wells |
| Model | WS-54228 |
| Switch Type | Rocker |
| Circuit Type | DPST (Double Pole, Single Throw) / 2-way |
| Mounting Type | Panel Mount |
| Control Method | Touch |
| Dimensions (Approx.) | 0.87 x 1.5 inches |
| Unit Count | 1.0 Count |
| UPC | 400015024044 |
| Manufacturer | Wells |
| Date First Available | September 5, 2025 |
9. Warranty and Support
For information regarding warranty coverage, technical support, or replacement parts for your Wells WS-54228 DPST Rocker Switch, please contact Wells customer service directly. Refer to the product packaging or the official Wells website for current contact details.
